Download Free Technology Of Reduced Additive Foods Book in PDF and EPUB Free Download. You can read online Technology Of Reduced Additive Foods and write the review.

Since some food additives have been shown to be harmful to certain individuals, a common perception now is that all food additives are potentially dangerous. This had led to a large market for products making minimal use of additives. Tight regulatory control and labelling requirements provide further impetus for the development of these products. This book provides an authoritative and comprehensive review of the industrially important advances in the technology that allow food products to be manufactured with fewer of the additives that have been traditionally used. Also, many new natural and harmless ingredients and additives are becoming available. These are also covered to enable new product concepts to be considered. The first edition of this book was widely accepted as a key reference in this subject, and this new edition has been thoroughly revised throughout to reflect current trends and practice. The chapters on packaging, marine-derived ingredients, animal-derived ingredients and reduced-additive breadmaking have all been extensively revised and additional authors and co-authors have been recruited for the second edition. Topics such as active packaging, good manufacturing practice, HACCP and natural ingredients have been reviewed with regards to their effect on the technology of reduced-additive foods.
The food industry for many years reacted to consumer demand for more appealing and convenient food products by using additives. More recently the demands of consumers have grown to include still higher performance products but with less additives. The industry has responded accordingly. There are often significant scientific and technical obstacles to be overcome to make a product with less additives. It is these technical challenges that this book is intended to address. The approach taken in this book is to examine specific aspects of the industry where important contributions are being made to avoid or reduce additive use or to create new, natural and more acceptable additives which can replace the old ones. There is a tremendous amount of work underway in this field and to cover it comprehensively would fill many volumes. This volume addresses the areas where there has been a considerable amount of recent activity and published results. Chapter 1 covers starter cultures in dairy products, meat products and bread. The author is Professor Gunnar Mogensen, the Director of Research and Development for Chr. Hansen's Laboratorium, the fore most suppliers of starter cultures in the world. He examines developments in starter culture technology and illustrates ways in which starter cultures are replacing traditional additives in foods.
FOOD CHEMISTRY A unique book detailing the impact of food adulteration, food toxicity and packaging on our nutritional balance, as well as presenting and analyzing technological advancements such as the uses of green solvents with sensors for non-destructive quality evaluation of food. Food Chemistry: The Role of Additives, Preservatives and Adulteration is designed to present basic information on the composition of foods and the chemical and physical changes that their characteristics undergo during processing, storage, and handling. Details concerning recent developments and insights into the future of food chemical risk analysis are presented, along with topics such as food chemistry, the role of additives, preservatives, and food adulteration, food safety objectives, risk assessment, quality assurance, and control. Moreover, good manufacturing practices, food processing systems, design and control, and rapid methods of analysis and detection are covered, as well as sensor technology, environmental control, and safety. The book also presents detailed information about the chemistry of each major class of food additive and their multiple functionalities. In addition, numerous recent findings are covered, along with an explanation of how their quality is ascertained and consumer safety ensured. Audience The core audience of this book include food technologists, food chemists, biochemists, biotechnologists, food, and beverage technologists, and nanoscientists working in the field of food chemistry, food technology, and food and nanoscience. In addition, R&D experts, researchers in academia and industry working in food science/safety, and process engineers in industries will find this book extremely valuable.
Reducing the intake of sodium is an important public health goal for Americans. Since the 1970s, an array of public health interventions and national dietary guidelines has sought to reduce sodium intake. However, the U.S. population still consumes more sodium than is recommended, placing individuals at risk for diseases related to elevated blood pressure. Strategies to Reduce Sodium Intake in the United States evaluates and makes recommendations about strategies that could be implemented to reduce dietary sodium intake to levels recommended by the Dietary Guidelines for Americans. The book reviews past and ongoing efforts to reduce the sodium content of the food supply and to motivate consumers to change behavior. Based on past lessons learned, the book makes recommendations for future initiatives. It is an excellent resource for federal and state public health officials, the processed food and food service industries, health care professionals, consumer advocacy groups, and academic researchers.
Food production is an increasingly complex and global enterprise, and public awareness of poisoning outbreaks is higher than ever. This makes it vital that companies in the food chain maintain scrupulous standards of hygiene and are able to assure customers of the safety of their products. This book reviews the production of food and the level of microorganisms that humans ingest, covering both food pathogens and food spoilage organisms. The comprehensive contents include: the dominant foodborne microorganisms; the means of their detection; microbiological criteria and sampling plans; the setting of microbial limits for end-product testing; predictive microbiology; the role of HACCP; the setting of Food Safety Objectives; relevant international regulations and legislation. This updated and expanded second edition contains much important new information on emerging microbiological issues of concern in food safety, including: microbiological risk assessment; bacterial genomics and bioinformatics; detergents and disinfectants, and the importance of hygiene practice personnel. The book is essential reading for all those studying food science, technology and food microbiology. It is also a valuable resource for government and food company regulatory personnel, quality control officers, public health inspectors, environmental health officers, food scientists, technologists and microbiologists. Web-based sources of information and other supporting materials for this book can be found at www.wiley.com/go/forsythe
"This book offers companies in the food industry the first comprehensive guide to preparing for the Global Standard Audit." Beverage and Food World, May 2009 BASED ON ISSUE 5 OF THE BRC STANDARD The British Retail Consortium Global Standard for Food Safety was originally conceived to meet an increasing demand for a unified standard to be used by the major retailers in the UK for their suppliers of "own label" food products. The system has proved so successful that it is now used throughout the food industry, and over 7000 food manufacturers worldwide already have the Standard. Companies are often unsure about how to approach attaining certification—often a demanding process, especially at the first attempt. Not only are there over 300 clauses to satisfy, there are also general concerns such as how to correct non-conformities within very specific deadlines. Even when their operations are actually quite satisfactory, many suppliers find themselves poorly prepared for the audit and do not perform as well as they might. This book offers companies in the food industry the first comprehensive guide to preparing for the Global Standard audit. Using over 600 real life examples, it enables manufacturers to ensure that the correct systems are in place to achieve the Standard and present themselves in the best way during the audit process. It also recommends the steps to take following the audit and how to correct non-conformities. The book is an essential resource for suppliers wishing to attain certification for the first time and those already in the scheme seeking to improve their grades. It is also of interest to certification bodies and consultants to the food industry.
Biodeterioration can be defined as the breakdown of food by agents of microbiological origin, either directly or from products of their metabolism. Microbiological sources can be present in foods prior to packaging or on the surfaces of packaging materials. The shelf life and safety of the food will depend on the type and quantity of microorganism, as well as the hurdles to their growth offered by various preservation techniques. This book discusses how the agents of food biodeterioration operate, and examines the commercially-used industrial methods available to control them, allowing the production of safe and wholesome foods. There is an emphasis on the equipment employed to carry out the various methods of preservation. The introductory chapter describes in detail the microorganisms and mechanisms of food breakdown intrinsic to various key food types; dairy, meat and fish, fruit, and vegetables. Direct microorganism action will be covered in addition to enzymatic breakdown. The second chapter addresses HACCP, including food safety legislation. Subsequent chapters outline the principal, commercially-used methods of preserving foods. These chapters follow a common structure: theoretical background; flow sheets of operations; food preparation/processing equipment; special features of hygiene; packaging; shelf life; and product safety. Food Biodeterioration and Preservation is directed at food scientists and technologists in industry and academia. Since it covers all the commonly-used methods of food preservation, it will be relevant across the entire food manufacturing industry.
This book provides a comprehensive source of information on freezing and frozen storage of food. Initial chapters describe the freezing process and provide a fundamental understanding of the thermal and physical processes that occur during freezing. Experts in each stage of the frozen cold chain provide, within dedicated chapters, guidelines and advice on how to freeze food and maintain its quality during storage, transport, retail display and in the home. Individual chapters deal with specific aspects of freezing relevant to the main food commodities: meat, fish, fruit and vegetables. Legislation and new freezing processes are also covered. Frozen Food Science and Technology offers in-depth knowledge of current and emerging refrigeration technologies along the entire frozen food chain, enabling readers to optimise the quality of frozen food products. It is aimed at food scientists, technologists and engineers within the frozen food industry; frozen food retailers; and researchers and students of food science and technology.
The Dictionary of Food Ingredients is a unique, easy-to-use source of infor mation on over 1,000 food ingredients. Like the previous editions, the new and updated Third Edition provides clear and concise information on currently used additives, including natural ingredients, FDA-approved artificial ingredients, and compounds used in food processing. The dictionary entries, organized in alphabetical order, include information on ingredient functions, chemical properties, and uses in food products. The updated and revised Third Edition contains approximately 1 SO new entries, and includes an updated and expanded bibliography. It also lists food ingredients ac cording to U. S. federal regulatory status. Users of the two previous editions have commented favorably on the dictionary's straightforward and clearly-written definitions, and we have endeavored to maintain that standard in this new edition. We trust it will continue to be a valuable reference for the food scientist, food processor, food product developer, nutritionist, extension specialist, and student. R S. Igoe Y. H. Hui vii Ingredients A Acacia See Arabic. Acesulfame-K A non-nutritive sweetener, also termed acesulfame potas sium. It is a white, crystalline product that is 200 times sweeter than sucrose. It is not metabolized in the body. It is relatively stable as a powder and in liquids and solids which may be heated. Acesulfame-K is approved for use in dry food products. Acesulfame Potassium See Acesulfame-K.
The Dictionary of Food Ingredients is a unique, easy-to-use source of infor mation on over 1,000 food ingredients. Like the previous editions, the new and updated Third Edition provides clear and concise information on currently used additives, including natural ingredients, FDA-approved artificial ingredients, and compounds used in food processing. The dictionary entries, organized in alphabetical order, include information on ingredient functions, chemical properties, and uses in food products. The updated and revised Third Edition contains approximately 1 SO new entries, and includes an updated and expanded bibliography. It also lists food ingredients ac cording to U. S. federal regulatory status. Users of the two previous editions have commented favorably on the dictionary's straightforward and clearly-written definitions, and we have endeavored to maintain that standard in this new edition. We trust it will continue to be a valuable reference for the food scientist, food processor, food product developer, nutritionist, extension specialist, and student. R S. Igoe Y. H. Hui vii Ingredients A Acacia See Arabic. Acesulfame-K A non-nutritive sweetener, also termed acesulfame potas sium. It is a white, crystalline product that is 200 times sweeter than sucrose. It is not metabolized in the body. It is relatively stable as a powder and in liquids and solids which may be heated. Acesulfame-K is approved for use in dry food products. Acesulfame Potassium See Acesulfame-K.