Download Free Surface Subsidence Over A Room And Pillar Mine In The Western United States Book in PDF and EPUB Free Download. You can read online Surface Subsidence Over A Room And Pillar Mine In The Western United States and write the review.

This report summarizes the results from the subsidence research study completed by the U.S. Bureau of Mines at the Roadside Mine, Powderhorn Coal Co., Palisade, Co. This research was conducted from February 1981 to August 1985, with additional data obtained during July 1991, to evaluate residual subsidence. The Bureau studied subsidence at three district room-and-pillar sections at separate locations over the mine and determined the maximum subsidence values and surface subsidence profiles for each mining section. Maximum subsidence of 3.0 ft occurred over the room-andpillar sections, with overburden depths ranging from 50 to 600 ft. Surface tension cracks had occurred, and were still evident during the residual subsidence survey.
Underground coal mining disturbs both the overburden strata and the immediate floor strata. The subject of surface subsidence deals with the issues associated with the movement of overburden strata, which are the layers from the seam to the surface, where structures and water resources important to human activities are located. Surface Subsidence Engineering provides comprehensive coverage of the major issues associated with surface subsidence. The chapters are written by experts on surface subsidence in the three leading coal producing and consuming countries in the world: Australia, China and the United States. They discuss general features and terminologies, subsidence prediction, subsidence measurement techniques, subsidence impact on water bodies, subsidence damage, mitigation and control, and subsidence on abandoned coal mines. In addition, the final chapter addresses some of the unique features of surface subsidence found in Australian coal mines. The book provides information on coal seams ranging from flat to gently inclined to steep to ultra-steep seams. Written for mining engineers, geotechnical engineers and students of mining engineering, this book covers both theories and practices of surface subsidence. Unlike previous publications, it also deals with the subsidence impact on surface and groundwater bodies, crucial resources that are often neglected by subsidence researchers.
Advanced Mine Ventilation presents the reader with a unique book providing the theory and applications for designing mine ventilation with computers, controlling respirable coal dust and diesel particulate matter, combustible gas control and, mine fire management. The book summarizes the latest knowledge created in the past 40 years in these areas. Authored by an expert in the field with 50 years' experience, the book is a great combination of theory and applications. The mine ventilation section provides computer programs (both FORTRAN and C++) to calculate not only air quantities and pressure losses but also the concentration of any pollutant in all junctions and branches of the mine network. Small particle mechanics and dust control is covered in the second section of the book. The third section on combustible gas control discusses all aspects of mine gases from origin to control. The last section on mine fire control discusses spontaneous combustion, frictional ignitions, mine explosions, and mine sealing and recovery. The book is not only a very good reference book but also an excellent textbook for two graduate level courses in Mining Engineering. - Provides the latest knowledge on the four related topics of mine environment control; that is, ventilation, dust, gas, and fire in a single volume - Computer simulation of mine ventilation in both FORTRAN and C++ - State-of-the-art respirable dust control - Mine degasification and methane production from a coal lease - Mine fire management