Download Free Strategies And Methods For Implementing Ce In Construction Activities In The Nordic Countries Supporting Cases Book in PDF and EPUB Free Download. You can read online Strategies And Methods For Implementing Ce In Construction Activities In The Nordic Countries Supporting Cases and write the review.

Available online: https://pub.norden.org/temanord2021-508/ The national strategies for a circular economy set the overall targets for implementation of circular economy in the country. Putting theory into practice via local strategies can be a good means for the transition towards a circular economy in the construction sector. Municipalities can set demands for CE solutions by requiring, e.g. the use of recycled and/or recyclable construction materials, the application of design for disassembly principles in construction and requiring resource mapping, and reuse and recycling in the demolition phase. The study identifies and presents cases and experiences from the implementation of CE concepts at the local level in the Nordic communities with a focus on construction, renovation and demolition. Barriers and drivers for the uptake of CE solutions are analysed, and enabling factors that could support the implementation of circular economy concepts and identified barriers in norms, legislation and guidelines are described. As part of the project, the project group gave 10 policy recommendations.
Available online: https://pub.norden.org/nord2021-014/ A circular economy (CE) in the construction sector offers significant possibilities for saving natural resources and energy, while also reducing greenhouse gas emissions. The Nordic Working Group for Circular Eonomy (NCE) initiated a study to identify and present cases and experiences from the implementation of CE concepts at the local level in the Nordic communities with a focus on construction, renovation and demolition. This Policy Brief highligts the key findings.
Available online: https://pub.norden.org/temanord2023-504/ The Nordic region aims to be a forerunner in the transition to circular economy. This project aimed to find areas, industries, and sectors, and potential in them, important for the circular transition in the Nordics. The barriers for unleashing the potential were also studied.Four areas of industry and two cross-cutting drivers were selected for the study. The bioeconomy, the food and beverage sector, building and construction, and the mobility sector play a prominent role in the Nordic economies. They are also responsible for significant emissions and waste. The drivers – applying new circular business models and better exploiting data/digitalisation – can bring change that holds promise for significant benefits.The study’s results are summed up in a set of recommendations addressing how the barriers can be torn down and how positive impacts of circular transition can be supported.
Circular Economy in the Construction Industry is an invaluable resource for researchers, policymakers, implementers and PhD and Masters-level students in universities analyzing the present status of Construction and Demolition Wastes (C&DW) management, materials development utilizing slag, fly ash, HDPE fibre, geo-wastes, and other wastes, green concrete, soil stabilization, resource circulation in construction sectors, success in experimentation & commercial production, future needs, and future research areas. While huge C&DW is wasted by dumping, there is potential of recycling preventing greenhouse gas (GHG) emissions and environmental pollution as well as creating business opportunities. Circularity of resources in the construction industry can contribute to a more secure, sustainable, and economically sound future through proper policy instruments, management systems, and recycling by selecting the following: Supply chain sustainability and collection of C&D Wastes, Appropriate separation and recycling technology, Enforcement of policy instruments, Productivity, quality control of recycled products and intended end use, Economic feasibility as business case, commercialization, generating employment. This book addresses most of the above issues in a lucid manner by experts in the field from different countries, which are helpful for the related stakeholders, edited by experts in the field.
The Bulletin of the Atomic Scientists is the premier public resource on scientific and technological developments that impact global security. Founded by Manhattan Project Scientists, the Bulletin's iconic "Doomsday Clock" stimulates solutions for a safer world.
The Bulletin of the Atomic Scientists is the premier public resource on scientific and technological developments that impact global security. Founded by Manhattan Project Scientists, the Bulletin's iconic "Doomsday Clock" stimulates solutions for a safer world.
This 4-volume set, IFIP AICT 689-692, constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2023, held in Trondheim, Norway, during September 17–21, 2023. The 213 full papers presented in these volumes were carefully reviewed and selected from a total of 224 submissions. They were organized in topical sections as follows: Part I : Lean Management in the Industry 4.0 Era; Crossroads and Paradoxes in the Digital Lean Manufacturing World; Digital Transformation Approaches in Production Management; Managing Digitalization of Production Systems; Workforce Evolutionary Pathways in Smart Manufacturing Systems; Next Generation Human-Centered Manufacturing and Logistics Systems for the Operator 5.0; and SME 5.0: Exploring Pathways to the Next Level of Intelligent, Sustainable, and Human-Centered SMEs. Part II : Digitally Enabled and Sustainable Service and Operations Management in PSS Lifecycle; Exploring Digital Servitization in Manufacturing; Everything-as-a-Service (XaaS) Business Models in the Manufacturing Industry; Digital Twin Concepts in Production and Services; Experiential Learning in Engineering Education; Lean in Healthcare; Additive Manufacturing in Operations and Supply Chain Management; and Applications of Artificial Intelligence in Manufacturing. Part III : Towards Next-Generation Production and SCM in Yard and Construction Industries; Transforming Engineer-to-Order Projects, Supply Chains and Ecosystems; Modelling Supply Chain and Production Systems; Advances in Dynamic Scheduling Technologies for Smart Manufacturing; and Smart Production Planning and Control. Part IV : Circular Manufacturing and Industrial Eco-Efficiency; Smart Manufacturing to Support Circular Economy; Product Information Management and Extended Producer Responsibility; Product and Asset Life Cycle Management for Sustainable and Resilient Manufacturing Systems; Sustainable Mass Customization in the Era of Industry 5.0; Food and Bio-Manufacturing; Battery Production Development and Management; Operations and SCM in Energy-Intensive Production for a Sustainable Future; and Resilience Management in Supply Chains.
ECPPM 2022 - eWork and eBusiness in Architecture, Engineering and Construction contains the papers presented at the 14th European Conference on Product & Process Modelling (ECPPM 2022, Trondheim, Norway, 14-16 September 2022), and builds on a long-standing history of excellence in product and process modelling in the construction industry, which is currently known as Building Information Modelling (BIM). The following topics and applications are given special attention: Sustainable and Circular Driven Digitalisation: Data Driven Design and/or Decision Support Assessment and Documentation of Sustainability Information lifecycle Data Management: Collection, Processing and Presentation of Environmental Product Documentation (EPD) and Product Data Templates (PDT) Digital Enabled Collaboration: Integrated and Multi-Disciplinary Processes Virtual Design and Construction (VDC): Production Metrics, Integrated Concurrent Engineering, Lean Construction and Information Integration Automation of Processes: Automation of Design and Engineering Processes, Parametric Modelling and Robotic Process Automation Expert Systems: BIM based model and compliance checking Enabling Technologies: Machine Learning, Big Data, Artificial and Augmented Intelligence, Digital Twins, Semantic Technology Sensors and IoT Production with Autonomous Machinery, Robotics and Combinations of Existing and New Technical Solutions Frameworks for Implementation: International Information Management Series (ISO 19650), and Other International Standards (ISO), European (CEN) and National Standards, Digital Platforms and Ecosystems Human Factors in Digital Application: Digital Innovation, Economy of Digitalisation, Client, Organisational, Team and/or Individual Perspectives Over the past 25 years, the biennial ECPPM conference proceedings series has provided researchers and practitioners with a unique platform to present and discuss the latest developments regarding emerging BIM technologies and complementary issues for their adoption in the AEC/FM industry.
The Nordic countries rank high in international reports of nations' progress towards the 17 Sustainable Development Goals (SDG). Along with other industrialised countries, however, the Nordic countries have been ranked poorly in their progress towards SDG 12, which concerns Sustainable Consumption and Production. This report looks closer at the Nordic countries' main challenges in achieving SDG12 and sets out recommendations for Nordic collaboration to tackle these.