Download Free Steel Fiber Reinforced Superplasticized Concretes For Rehabilitation Of Bridge Decks And Highway Pavements Book in PDF and EPUB Free Download. You can read online Steel Fiber Reinforced Superplasticized Concretes For Rehabilitation Of Bridge Decks And Highway Pavements and write the review.

The leading international authorities bring together in this contributed volume the latest research and current thinking on advanced fiber reinforced cement composites. Under rigorous editorial control, 13 chapters map out the key properties and behaviour of these materials, which promise to extend their applications into many more areas in the coming years.
This synthesis wil be of interest to materials engineers, construction engineers, maintenance engineers, pavement contractors and others interested in the use of latex-modified mortars (LMM) and concretes ( LMC). Information is provided on material properties of various LMM and LMC, as well as current construction practices used for LMM and LMC. Potential applications for LMM and LMC are also included. The use of innovative modified portland cement mortars and concretes for construction and maintenance applications is growing. This report of the Transportation Research Board describes the current state of the practice with respect to the use of latex-modified portland cement concretes and mortars. The extent of use of each material (including case histories), based on results of surveys of state highway agencies and a review of the literature, is summarized.
This report documents the results from an investigation of a new polymer fiber and unique delivery system for charging fibers into concrete mixtures. The straight Polyolefin fibers are available in two sizes: (1) 0.63 mm in diameter and 50 mm long, and (2) 0.38 mm in diameter and 25 mm long. Each of the two sizes of fibers is packaged in bundles approximately 50 mm in diameter. Each. bundle is encased with paper tape bound with a water-soluble glue. The fibers are charged into the concrete mixture in mass. Approximately 3 to 10 min of mixing time is necessary to uniformly distribute the fibers throughout the concrete mixture, depending upon the fiber content, consistency of the concrete mixture, and the type of mixer being used. Fresh and hardened properties were evaluated in mixtures containing up to 15 kg/cu m. The results indicate that concrete mixtures with the Polyolefin fibers can be produced having adequate workability and finishability if proportioned properly. Addition of the Polyolefin fibers does not significantly influence the compressive nor first-crack flexural strength, freezing-and-thawing resistance, drying shrinkage, nor the chloride permeability of concrete mixtures. However, the presence of the Polyolefin fibers does influence the post-crack behavior of concrete mixtures. Impact resistance and flexural toughness are improved as the fiber loading increases. A 6,100-m whitetopping demonstration project was constructed on a heavily traveled interstate in Mississippi. The whitetopping was 100 mm thick. Details of the specifications, construction, and early-time performance are given.