Download Free Space Nuclear Power Applications Book in PDF and EPUB Free Download. You can read online Space Nuclear Power Applications and write the review.

In 2003, NASA began an R&D effort to develop nuclear power and propulsion systems for solar system exploration. This activity, renamed Project Prometheus in 2004, was initiated because of the inherent limitations in photovoltaic and chemical propulsion systems in reaching many solar system objectives. To help determine appropriate missions for a nuclear power and propulsion capability, NASA asked the NRC for an independent assessment of potentially highly meritorious missions that may be enabled if space nuclear systems became operational. This report provides a series of space science objectives and missions that could be so enabled in the period beyond 2015 in the areas of astronomy and astrophysics, solar system exploration, and solar and space physics. It is based on but does not reprioritize the findings of previous NRC decadal surveys in those three areas.
Provides details of a variety of radioisotope power systems, shows in what circumstances they surpass other power systems, and provides the history of the space missions in which they have been employed. The book also summarizes the use of on-board reactors and the testing done on reactor rocket thrusters.
Nuclear propulsion : an introduction / Claudio Bruno -- Nuclear-thermal-rocket propulsion systems / Timothy J. Lawrence -- Application of ion thrusters to high-thrust, high-specific-impulse nuclear electric missions / D.G. Fearn -- High-power and high-thrust-density electric propulsion for in-space transportation / Monika Auweter-Kurtz and Helmut Kurtz -- Review of reactor configurations for space nuclear electric propulsion and surface power considerations / Roger X. Lenard -- Nuclear safety : legal aspects and policy recommendations / Roger X. Lenard -- Radioactivity, doses, and risks in nuclear propulsion / Alessio Del Rossi and Claudio Bruno -- The Chernobyl accident : a detailed account / Alessio del Rossi and Claudio Bruno.
Spacecraft require electrical energy. This energy must be available in the outer reaches of the solar system where sunlight is very faint. It must be available through lunar nights that last for 14 days, through long periods of dark and cold at the higher latitudes on Mars, and in high-radiation fields such as those around Jupiter. Radioisotope power systems (RPSs) are the only available power source that can operate unconstrained in these environments for the long periods of time needed to accomplish many missions, and plutonium-238 (238Pu) is the only practical isotope for fueling them. Plutonium-238 does not occur in nature. The committee does not believe that there is any additional 238Pu (or any operational 238Pu production facilities) available anywhere in the world.The total amount of 238Pu available for NASA is fixed, and essentially all of it is already dedicated to support several pending missions-the Mars Science Laboratory, Discovery 12, the Outer Planets Flagship 1 (OPF 1), and (perhaps) a small number of additional missions with a very small demand for 238Pu. If the status quo persists, the United States will not be able to provide RPSs for any subsequent missions.
Space Nuclear Propulsion for Human Mars Exploration identifies primary technical and programmatic challenges, merits, and risks for developing and demonstrating space nuclear propulsion technologies of interest to future exploration missions. This report presents key milestones and a top-level development and demonstration roadmap for performance nuclear thermal propulsion and nuclear electric propulsion systems and identifies missions that could be enabled by successful development of each technology.
High-performance alloys that can withstand operation in hazardous nuclear environments are critical to presentday in-service reactor support and maintenance and are foundational for reactor concepts of the future. With commercial nuclear energy vendors and operators facing the retirement of staff during the coming decades, much of the scholarly knowledge of nuclear materials pursuant to appropriate, impactful, and safe usage is at risk. Led by the multi-award winning editorial team of G. Robert Odette (UCSB) and Steven J. Zinkle (UTK/ORNL) and with contributions from leaders of each alloy discipline, Structural Alloys for Nuclear Energy Applications aids the next generation of researchers and industry staff developing and maintaining steels, nickel-base alloys, zirconium alloys, and other structural alloys in nuclear energy applications. This authoritative reference is a critical acquisition for institutions and individuals seeking state-of-the-art knowledge aided by the editors' unique personal insight from decades of frontline research, engineering and management. - Focuses on in-service irradiation, thermal, mechanical, and chemical performance capabilities. - Covers the use of steels and other structural alloys in current fission technology, leading edge Generation-IV fission reactors, and future fusion power reactors. - Provides a critical and comprehensive review of the state-of-the-art experimental knowledge base of reactor materials, for applications ranging from engineering safety and lifetime assessments to supporting the development of advanced computational models.
Risk-informed Methods and Applications in Nuclear and Energy Engineering: Modelling, Experimentation, and Validation presents a comprehensive view of the latest technical approaches and experimental capabilities in nuclear energy engineering. Based on Idaho National Laboratory's popular summer school series, this book compiles a collection of entries on the cutting-edge research and knowledge presented by proponents and developers of current and future nuclear systems, focusing on the connection between modelling and experimental approaches. Included in this book are key topics such as probabilistic concepts for risk analysis, the survey of legacy reliability and risk analysis tools, and newly developed tools supporting dynamic probabilistic risk-assessment. This book is an insightful and inspiring compilation of work from top nuclear experts from INL. Industry professionals, researchers and academics working in nuclear engineering, safety, operations and training will gain a board picture of the current state-of-practice and be able to apply that to their own risk-assessment studies. - Based on Idaho National Laboratory's summer school series, this book is a collection of entries from proponents and developers of current and future nuclear systems - Provides an up-to-date view of current technical approaches and experimental capabilities in nuclear energy engineering, covering modeling and validation, and focusing on risk-informed methods and applications - Equips the reader with an understanding of various case studies and experimental validations to enable them to carry out a risk-assessment study
The advantages of space nuclear fission power systems can be summarized as: compact size; low to moderate mass; long operating lifetimes; the ability to operate in extremely hostile environments; operation independent of the distance from the Sun or of the orientation to the Sun; and high system reliability and autonomy. In fact, as power requirements approach the tens of kilowatts and megawatts, fission nuclear energy appears to be the only realistic power option. The building blocks for space nuclear fission electric power systems include the reactor as the heat source, power generation equipment to convert the thermal energy to electrical power, waste heat rejection radiators and shielding to protect the spacecraft payload. The power generation equipment can take the form of either static electrical conversion elements that have no moving parts (e.g., thermoelectric or thermionic) or dynamic conversion components (e.g., the Rankine, Brayton or Stirling cycle). The U.S. has only demonstrated in space, or even in full systems in a simulated ground environment, uranium-zirconium-hydride reactor power plants. These power plants were designed for a limited lifetime of one year and the mass of scaled up power plants would probably be unacceptable to meet future mission needs. Extensive development was performed on the liquid-metal cooled SP-100 power systems and components were well on their way to being tested in a relevant environment. A generic flight system design was completed for a seven year operating lifetime power plant, but not built or tested. The former USSR made extensive use of space reactors as a power source for radar ocean reconnaissance satellites. They launched some 31 missions using reactors with thermoelectric power conversion systems and two with thermionic converters. Current activities are centered on Fission Surface Power for lunar applications. Activities are concentrating on demonstrating component readiness. This book will discuss the components that make up a nuclear fission power system, the principal requirements and safety issues, various development programs, status of developments, and development issues.