Download Free Soil Nailing Book in PDF and EPUB Free Download. You can read online Soil Nailing and write the review.

Soil nailing is an in situ soil reinforcement technique that can be used to enhance the stability of slopes, retaining walls, embankments, and excavations. It involves installation of closely spaced, relatively slender unstressed tension-carrying structural elements into the ground to stabilize the soil mass. These elements, which are called soil nails, comprise steel or other engineering materials such as fiber reinforced polymer. Soil nailing did not gain popularity until the 1970s when engineers started to realize that the technique could offer an effective, robust, and economical reinforcing system for a variety of ground conditions. More importantly, the track record has been excellent in that no major collapses have been reported in properly designed and well-constructed soil nailed structures so far. Considerable experience and knowledge of the technique have been gained in the past few decades through systematic technical development work comprising laboratory tests, numerical modeling, physical modeling, site trials and field monitoring covering design, and construction practices. Soil Nailing: A Practical Guide consolidates the experience and advances made in the development and use of the soil nailing technique and encourages a wider adoption of the technique by practitioners. The book is intended for use by postgraduate students, researchers, and practicing civil and geotechnical engineers, who wish to have a more in-depth and fundamental understanding of the theory and practice behind the technique. It presents the basic principles of the technique as well as state-of-the-art knowledge and recommended standard of good practice in respect of design, construction, monitoring, and maintenance of soil nailed structures.
Soil nailing is an in situ soil reinforcement technique that can be used to enhance the stability of slopes, retaining walls, embankments, and excavations. It involves installation of closely spaced, relatively slender unstressed tension-carrying structural elements into the ground to stabilize the soil mass. These elements, which are called soil nails, comprise steel or other engineering materials such as fiber reinforced polymer. Soil nailing did not gain popularity until the 1970s when engineers started to realize that the technique could offer an effective, robust, and economical reinforcing system for a variety of ground conditions. More importantly, the track record has been excellent in that no major collapses have been reported in properly designed and well-constructed soil nailed structures so far. Considerable experience and knowledge of the technique have been gained in the past few decades through systematic technical development work comprising laboratory tests, numerical modeling, physical modeling, site trials and field monitoring covering design, and construction practices. Soil Nailing: A Practical Guide consolidates the experience and advances made in the development and use of the soil nailing technique and encourages a wider adoption of the technique by practitioners. The book is intended for use by postgraduate students, researchers, and practicing civil and geotechnical engineers, who wish to have a more in-depth and fundamental understanding of the theory and practice behind the technique. It presents the basic principles of the technique as well as state-of-the-art knowledge and recommended standard of good practice in respect of design, construction, monitoring, and maintenance of soil nailed structures.
- Executive Summary - Introduction - Soil strengthening techniques - Design considerations - Conclusions - Acknowledgements - References - Appendix A: Design check of a new retaining wall (Scheme A) - Appendix B: Design check of a stregnthened retaining wall (Scheme B) - Abstract - Related publications
This report contains proposed specifications for the design and construction of soil-nailed retaining structures. Despite their advantages in cut applications, these structures are not available to some state DOTs, due to the lack of guidance for their use in AASHTO's standard specifications based on load and resistance factor design (LRFD).
This volume contains seven keynote lectures and over 100 technical contributions by scientists, researchers, engineers and students from more than 25 countries and regions worldwide on the subject of soft soil engineering.
The following is just a selection of the contents - Theory and design related to the performance of reinforced soil structures - A study of the influence of soil on the reinforcement load in polymer grid reinforced soil structures - Cellular retaining walls reinforced by geosynthetics:behaviour and design - The results of pull out tests caried out in PFA on a reinforced and unreinforced soil walls - In-situ techniques of reinforced soil - Design and field test on reinforced cut slope - Reinforcing a sand slope surrorting a footing using steel bars - Discussion of papers in session 4 - Effect of reinforcement in embankment - Session Summary
The study of the solid part of the earth on which structures are built is an essential part of the training of a civil engineer. Geotechnical processes such as drilling, pumping and injection techniques enhance the viability of many construction processes by improving ground conditions. Highlighting the ground investigation necessary for the process, the likely improvement in strength of treated ground and testing methods An Introduction to Geotechnical Processes covers the elements of ground treatment and improvement, from the control of groundwater, drilling and grouting to ground anchors and electro-chemical hardening.
Soil represents the oldest and most-used building material, yet up to now the subject of earthen structures has not been fully addressed. This book describes the principles of soil as construction material including its treatment using geosynthetics and stabilization. The book focuses on the principles, logic of processes, understanding of the most important problems, so that all participants in the construction project can build earth structures more safely and economically.
This book is an engineering guide for design of slopes and stabilisation works in rocks and residual soils. It is tailored to the needs of practising geotechnical engineers and engineering geologists. Engineering and engineering geology students will find it quite useful and a practical course guide. It can be used as textbook in courses on landslides and slope stabilisation. The purpose of this book is to present a concise documentation on how to design slopes and how to select a slope stabilisation method. The authors are scholars and professional engineers with many years of international experience in slope stabilization works in South and Central America and the Far East.