Download Free Simulations Of Charge Transport In Organic Compounds Book in PDF and EPUB Free Download. You can read online Simulations Of Charge Transport In Organic Compounds and write the review.

To aid the design of organic semiconductors, we study the charge transport properties of organic liquid crystals and single crystals. The aim is to find structure-property relationships linking the chemical structure as well as the morphology with the bulk charge carrier mobility of the compounds. To this end, molecular dynamics (MD) simulations are performed yielding realistic equilibrated morphologies. Partial charges and molecular orbitals are calculated using quantum chemical methods. The molecular orbitals are then mapped onto the molecular positions and orientations, which allows calculation of the transfer integrals between nearest neighbors using the molecular orbital overlap method. Thus realistic transfer integral distributions and their autocorrelations are obtained. In case of organic crystals two descriptions of charge transport, namely semi-classical dynamics (SCD) and kinetic Monte Carlo (KMC) based on Marcus rates, are studied. In KMC one assumes that the wave function is localized on one molecule, while in SCD it is spread over a limited number of neighboring molecules. The results are compared amongst each other and, where available, with experimental data.
To aid the design of organic semiconductors, we study the charge transport properties of organic liquid crystals, i.e. hexabenzocoronene and carbazole macrocycle, and single crystals, i.e. rubrene, indolocarbazole and benzothiophene derivatives (BTBT, BBBT). The aim is to find structure-property relationships linking the chemical structure as well as the morphology with the bulk charge carrier mobility of the compounds. To this end, molecular dynamics (MD) simulations are performed yielding realistic equilibrated morphologies. Partial charges and molecular orbitals are calculated based on single molecules in vacuum using quantum chemical methods. The molecular orbitals are then mapped onto the molecular positions and orientations, which allows calculation of the transfer integrals between nearest neighbors using the molecular orbital overlap method. Thus we obtain realistic transfer integral distributions and their autocorrelations. In case of organic crystals the differences between two descriptions of charge transport, namely semi-classical dynamics (SCD) in the small polaron limit and kinetic Monte Carlo (KMC) based on Marcus rates, are studied. The liquid crystals are investigated solely in the hopping limit. To simulate the charge dynamics using KMC, the centers of mass of the molecules are mapped onto lattice sites and the transfer integrals are used to compute the hopping rates. In the small polaron limit, where the electronic wave function is spread over a limited number of neighboring molecules, the Schroedinger equation is solved numerically using a semi-classical approach. The results are compared for the different compounds and methods and, where available, with experimental data. The carbazole macrocycles form columnar structures arranged on a hexagonal lattice with side chains facing inwards, so columns can closely approach each other allowing inter-columnar and thus three-dimensional transport. When taking only intra-columnar transport into account, t.
With the technological advancement of modern society, electronic devices are getting progressively more integrated in our everyday lives. Their continuouslygrowing presence is generating numerous concerns about costs, efficiency and the environmental impact of the electronic waste. In this context, organic electronics is finding its way through the market, allowing for potentially low-cost, light, flexible, transparent and environmentally friendly electronics. Despite the numerous successes of organic electronics, the functioning of several categories of organic devices still represents a technological challenge, due to problems like low efficiencies and stabilities (degradation over time). Organic devices are composed by one or more organic materials depending on the particular application. The conformation and electronic structure of the organic molecules as well as their supramolecular arrangement in the single phase or at the interface are known to strongly a affect the mobility and/or the efficiency of the device. While there is consensus on the fundamental physics of organic devices, we still lack a detailed comprehensive theory able to fully explain experimental data. In this thesis we focus on trying to expand our knowledge of charge transport in organic materials through theoretical modelling and simulation of organic electronic devices. While the methodology developed is generally valid for any organic device, we will particularly focus on the case represented by organic photovoltaics. The morphology of the system is obtained by molecular dynamics simulations. Marcus theory is used to calculate the hopping rate of the charge carriers and subsequently study the possibility of free charge carriers production in an organic solar cell. The theory is then compared both with Kinetic Monte Carlo simulations and with experiments to identify the main pitfalls of the actual theory and ways to improve it. The Marcus rate between two molecules depends on the molecular orbital energies, the transfer integral between the two molecules and the reorganization energy. The orbital energies and the transfer integrals between two neighbouring molecules are obtained through quantum mechanical calculations in vacuum. Electrostatic effects of the environment are included through atomic charges and atomic polarizabilities, producing a correction both to the orbital energy and to the reorganization energy. We have studied several systems in the single phase (polyphenylene vinylene, C60, PC61BM) and at the interface between two organic materials (anthracene/C60, TQ1/PC71BM). We show how a combination of different methodologies can be used to obtain a realistic ab-initio model of organic devices taking into account environmental effects. This allows us to obtain qualitative agreement with experimental data of mobility in the single phase and to determine whether or not two materials are suitable to be used together in an organic solar cell.
Thin film organic semiconductors have applications in electronic devices such as transistors, light emitting diodes, and organic solar cells. The performance of such devices depends on the mobility of the charge carriers which is strongly affected by the morphology of the material. In this work, we perform Monte Carlo simulations to study charge transport in lattice models of homogeneous and heterogeneous materials. The model device consists of a layer of the material between two electrodes at different potentials. Charge carriers are injected from the electrodes and move by hopping under the influence of the electric field and Coulomb interactions. To model the effect of polymer chain connectivity on charge transport we include an energetic barrier to hopping between sites on different chains. We measure current-voltage (I-V) characteristics of model devices and determine the mobility of the charge carriers from the slope of the I-V curves in the ohmic regime. We validate our algorithms with simulations of simple devices consisting of two parallel layers of donor and acceptor materials between the electrodes. To study the effect of ordered domains in polymeric semiconductors we simulate charge transport in a recently developed lattice model for polymers that undergo an order-disorder transition. We find that ordering in the material leads to strong anisotropies with increased mobility for transport parallel to the ordered domains and reduced mobility for perpendicular transport.
In the field of organic semiconductors researchers and manufacturers are faced with a wide range of potential molecules. This work presents concepts for simulation-based predictions of material characteristics starting from chemical stuctures. The focus lies on charge transport – be it in microscopic models of amorphous morphologies, lattice models or large-scale device models. An extensive introductory review, which also includes experimental techniques, makes this work interesting for a broad readership. Contents: Organic Semiconductor Devices Experimental Techniques Charge Dynamics at Dierent Scales Computational Methods Energetics and Dispersive Transport Correlated Energetic Landscapes Microscopic, Stochastic and Device Simulations Parametrization of Lattice Models Drift–Diusion with Microscopic Link
The first reference of its kind in the rapidly emerging field of computational approachs to materials research, this is a compendium of perspective-providing and topical articles written to inform students and non-specialists of the current status and capabilities of modelling and simulation. From the standpoint of methodology, the development follows a multiscale approach with emphasis on electronic-structure, atomistic, and mesoscale methods, as well as mathematical analysis and rate processes. Basic models are treated across traditional disciplines, not only in the discussion of methods but also in chapters on crystal defects, microstructure, fluids, polymers and soft matter. Written by authors who are actively participating in the current development, this collection of 150 articles has the breadth and depth to be a major contributor toward defining the field of computational materials. In addition, there are 40 commentaries by highly respected researchers, presenting various views that should interest the future generations of the community. Subject Editors: Martin Bazant, MIT; Bruce Boghosian, Tufts University; Richard Catlow, Royal Institution; Long-Qing Chen, Pennsylvania State University; William Curtin, Brown University; Tomas Diaz de la Rubia, Lawrence Livermore National Laboratory; Nicolas Hadjiconstantinou, MIT; Mark F. Horstemeyer, Mississippi State University; Efthimios Kaxiras, Harvard University; L. Mahadevan, Harvard University; Dimitrios Maroudas, University of Massachusetts; Nicola Marzari, MIT; Horia Metiu, University of California Santa Barbara; Gregory C. Rutledge, MIT; David J. Srolovitz, Princeton University; Bernhardt L. Trout, MIT; Dieter Wolf, Argonne National Laboratory.
Organic photovoltaics (OPVs) are a promising carbon-neutral energy conversion technology, with recent improvements pushing power conversion efficiencies over 10%. A major factor limiting OPV performance is inefficiency of charge transport in organic semiconducting materials (OSCs). Due to strong coupling with lattice degrees of freedom, the charges form polarons, localized quasi-particles comprised of charges dressed with phonons. These polarons can be conceptualized as pseudo-atoms with a greater effective mass than a bare charge. Here we propose that due to this increased mass, polarons can be modeled with Langevin molecular dynamics (LMD), a classical approach with a computational cost much lower than most quantum mechanical methods. Here we present LMD simulations of charge transfer between a pair of fullerene molecules, which commonly serve as electron acceptors in OSCs. We find transfer rates consistent with experimental measurements of charge mobility, suggesting that this method may provide quantitative predictions of efficiency when used to simulate materials on the device scale. Our approach also offers information that is not captured in the overall transfer rate or mobility: in the simulation data, we observe exactly when and why intermolecular transfer events occur. In addition, we demonstrate that these simulations can shed light on the properties of polarons in OSCs. In conclusion, much remains to be learned about these quasi-particles, and there are no widely accepted methods for calculating properties such as effective mass and friction. Our model offers a promising approach to exploring mass and friction as well as providing insight into the details of polaron transport in OSCs.
This work examines all aspects of organic conductors, detailing recent theoretical concepts and current laboratory methods of synthesis, measurement, control and analysis. It describes advances in molecular-scale engineering, including switching and memory systems, Schottky and electroluminescent diodes, field-effect transistors, and photovoltaic devices and solar cells.
(Cont) Most significantly, the theory will enable predictive models of organic semiconductor devices based on physical material parameters that may be determined by experimental measurements or quantum chemical simulations. Understanding charge transport and injection through these materials is crucial to enable the rational design for organic device applications, and also contributes to the general knowledge of the physics of materials characterized by charge localization and energetic disorder.