Download Free Signal And Power Integrity In Digital Systems Book in PDF and EPUB Free Download. You can read online Signal And Power Integrity In Digital Systems and write the review.

With the inclusion of the two new hot topics in signal integrity, power integrity and high speed serial links, this book will be the most up to date complete guide to understanding and designing for signal integrity.
Before putting digital systems for information technology or telecommunication applications on the market, an essential requirement is to perform tests in order to comply with the limits of radiated emission imposed by the standards. This book provides an investigation into signal integrity (SI) and electromagnetic interference (EMI) problems. Topics such as reflections, crosstalk, switching noise and radiated emission (RE) in high-speed digital systems are covered, which are essential for IT and telecoms applications. The highly important topic of modelling is covered which can reduce costs by enabling simulation data to demonstrate that a product meets design specifications and regulatory limits. According to the new European EMC directive, this can help to avoid the expensive use of large semi-anechoic chambers or open area test sites for radiated emission assessments. Following a short introduction to signalling and radiated interference in digital systems, the book provides a detailed characterization of logic families in terms of static and dynamic characteristic useful for modelling techniques. Crosstalk in multi-coupled line structures are investigated by analytical, graphical and circuit-based methods, and techniques to mitigate these phenomena are provided. Grounding, filtering and shielding with multilayer PCBs are also examined and design rules given. Written by authors with extensive experience in industry and academia. Explains basic conceptual problems from a theoretical and practical point of view by using numerous measurements and simulations. Presents models for mathematical and SPICE-like circuit simulators. Provides examples of using full-wave codes for SI and RE investigations. Companion website containing lists of codes and sample material. Signal Integrity and Radiated Emission of High-Speed Digital Systems is a valuable resource to industrial designers of information technology, telecommunication equipment and automation equipment as well as to development engineers. It will also be of interest to managers and designers of consumer electronics, and researchers in electronics.
"This book shows designers how to ensure signal integrity and control noise in high-speed digital systems - particularly important in a Pentium-paced environment where functional logic design is no longer separable from electrical and mechanical design." "Highlighting TTL, CMOS, and BiCMOS logic applications in a single source, Signal and Power Integrity in Digital Systems provides a practical solutions-oriented approach to a wide variety of relevant interconnection and timing issues." "Special features include noise tolerant logic architectures; power distribution techniques that reduce noise; clock distribution techniques that ensure clock signal quality; signal interconnection techniques that reduce crosstalk, signal loading, and transmission-line effects; how to get optimum performance from high-speed memory devices; and system application tips for high-speed PALs, PLAs, FIFOs, and ASICs." "Designers will also appreciate the practical engineering approximations provided for the calculation of design parameters along with illustrations and numerous tables usable for quick reference and comparison of characteristics." "It's a book every digital designer should have - engineers involved in the design of computers, peripherals, signal processors, and control and communications equipment, as well as young engineers facing their first designs using high-speed logic devices."--BOOK JACKET.Title Summary field provided by Blackwell North America, Inc. All Rights Reserved
The First Comprehensive, Example-Rich Guide to Power Integrity Modeling Professionals such as signal integrity engineers, package designers, and system architects need to thoroughly understand signal and power integrity issues in order to successfully design packages and boards for high speed systems. Now, for the first time, there's a complete guide to power integrity modeling: everything you need to know, from the basics through the state of the art. Using realistic case studies and downloadable software examples, two leading experts demonstrate today's best techniques for designing and modeling interconnects to efficiently distribute power and minimize noise. The authors carefully introduce the core concepts of power distribution design, systematically present and compare leading techniques for modeling noise, and link these techniques to specific applications. Their many examples range from the simplest (using analytical equations to compute power supply noise) through complex system-level applications. The authors Introduce power delivery network components, analysis, high-frequency measurement, and modeling requirements Thoroughly explain modeling of power/ground planes, including plane behavior, lumped modeling, distributed circuit-based approaches, and much more Offer in-depth coverage of simultaneous switching noise, including modeling for return currents using time- and frequency-domain analysis Introduce several leading time-domain simulation methods, such as macromodeling, and discuss their advantages and disadvantages Present the application of the modeling methods on several advanced case studies that include high-speed servers, high-speed differential signaling, chip package analysis, materials characterization, embedded decoupling capacitors, and electromagnetic bandgap structures This book's system-level focus and practical examples will make it indispensable for every student and professional concerned with power integrity, including electrical engineers, system designers, signal integrity engineers, and materials scientists. It will also be valuable to developers building software that helps to analyze high-speed systems.
State-of-the-art techniques for predicting and achieving target performance levels Theory, practice, general signal integrity issues, and leading-edge experimental techniques Model and simulate high-speed digital systems for maximum performance Maximizing the performance of digital systems means optimizing their high-speed interconnections. Digital Signal Integrity gives engineers all the theory and practical methods they need to accurately model and simulate those interconnections and predict real-world performance. Whether you're modeling microprocessors, memories, DSPs, or ASICs, these techniques will get you to market faster with greater reliability. Coverage includes: In-depth reviews of inductance, capacitance, resistance, single and multiconductor transmission lines, generalized termination schemes, crosstalk, differential signaling, and other modeling/simulation issues Multiconductor interconnects: packages, sockets, connectors and buses Modal decomposition: understanding the outputs generated by commercial modeling software Layer peeling with time-domain reflectometry: its power and limitations Experimental techniques for characterizing interconnect parasitics In Digital Signal Integrity, Motorola senior engineer Brian Young presents broad coverage of modeling from data obtained through electromagnetic simulation, transmission line theory, frequency and time-domain modeling, analog circuit simulation, digital signaling, and architecture. Young offers a strong mathematical foundation for every technique, as well as over 100 end-of-chapter problems. If you're stretching the performance envelope, you must be able to rely on your models and simulations. With this book, you can.
A synergistic approach to signal integrity for high-speed digital design This book is designed to provide contemporary readers with an understanding of the emerging high-speed signal integrity issues that are creating roadblocks in digital design. Written by the foremost experts on the subject, it leverages concepts and techniques from non-related fields such as applied physics and microwave engineering and applies them to high-speed digital design—creating the optimal combination between theory and practical applications. Following an introduction to the importance of signal integrity, chapter coverage includes: Electromagnetic fundamentals for signal integrity Transmission line fundamentals Crosstalk Non-ideal conductor models, including surface roughness and frequency-dependent inductance Frequency-dependent properties of dielectrics Differential signaling Mathematical requirements of physical channels S-parameters for digital engineers Non-ideal return paths and via resonance I/O circuits and models Equalization Modeling and budgeting of timing jitter and noise System analysis using response surface modeling Each chapter includes many figures and numerous examples to help readers relate the concepts to everyday design and concludes with problems for readers to test their understanding of the material. Advanced Signal Integrity for High-Speed Digital Designs is suitable as a textbook for graduate-level courses on signal integrity, for programs taught in industry for professional engineers, and as a reference for the high-speed digital designer.
Cogently addressing the future of signal integrity and the effect it will have on the data transmission industry as a whole, this all-inclusive guide addresses a wide array of technologies, from traditional digital data transmission to microwave measurements, and accessibly examines the gap between the two. Focusing on real world applications and providing a wide array of case studies that show how each technology can be used—from backplane design challenges to advanced error correction techniques—this guide addresses many of today’s high-speed technologies while also providing excellent insight into their future direction. With numerous valuable lessons pertaining to the signal integrity industry, this resource is the ultimate must-read guide for any specialist in the design engineering field.
Foreword by Joungho Kim The Hands-On Guide to Power Integrity in Advanced Applications, from Three Industry Experts In this book, three industry experts introduce state-of-the-art power integrity design techniques for today's most advanced digital systems, with real-life, system-level examples. They introduce a powerful approach to unifying power and signal integrity design that can identify signal impediments earlier, reducing cost and improving reliability. After introducing high-speed, single-ended and differential I/O interfaces, the authors describe on-chip, package, and PCB power distribution networks (PDNs) and signal networks, carefully reviewing their interactions. Next, they walk through end-to-end PDN and signal network design in frequency domain, addressing crucial parameters such as self and transfer impedance. They thoroughly address modeling and characterization of on-chip components of PDNs and signal networks, evaluation of power-to-signal coupling coefficients, analysis of Simultaneous Switching Output (SSO) noise, and many other topics. Coverage includes * The exponentially growing challenge of I/O power integrity in high-speed digital systems * PDN noise analysis and its timing impact for single-ended and differential interfaces * Concurrent design and co-simulation techniques for evaluating all power integrity effects on signal integrity * Time domain gauges for designing and optimizing components and systems * Power/signal integrity interaction mechanisms, including power noise coupling onto signal trace and noise amplification through signal resonance * Performance impact due to Inter Symbol Interference (ISI), crosstalk, and SSO noise, as well as their interactions * Validation techniques, including low impedance VNA measurements, power noise measurements, and characterization of power-to-signal coupling effects Power Integrity for I/O Interfaces will be an indispensable resource for everyone concerned with power integrity in cutting-edge digital designs, including system design and hardware engineers, signal and power integrity engineers, graduate students, and researchers.
This thorough review of the fundamental principles associated with signal integrity provides engineering principles behind signal integrity effects, and applies this understanding to solving problems.
Proven methods for noise-tolerant nanoscale integrated circuit design This leading-edge guide discusses the impact of power integrity from a design perspective, emphasizing phenomena and problems induced by power integrity degradation and the latest design trends, including low-power design. Power Integrity for Nanoscale Integrated Systems describes how these problems can be forecast early in the design process and the countermeasures that can be used to address them, such as the inclusion of inductance and accurate modeling for PI analysis, as well as robust circuit design. Detailed examples and a case study on the IBM POWER7+ processor illustrate real-world applications of the techniques presented in this practical resource. Coverage includes: Significance of power integrity for integrated circuits Supply and substrate noise impact on circuits Clock generation and distribution with power integrity Signal and power integrity design for I/O circuits Power integrity degradation and modeling Lumped, distributed, and 3D modeling for power integrity Chip temperature and PI impact Low-power techniques and PI impact Power integrity case study using the IBM POWER7+ processor chip Carbon nanotube interconnects for power delivery