Download Free Side Chain Liquid Crystal Polymers Book in PDF and EPUB Free Download. You can read online Side Chain Liquid Crystal Polymers and write the review.

The subject of liquid crystals and their use in electronic displays and in non-linear optical systems has become of tremendous importance during the last decade; and the incorporation of liquid crystal units into polymeric materials has led to a group of new materials with diverse properties. Some of these properties have been utilized in new products and some have yet to be used. Much published work has appeared that deals with specific materials or particular applications, and it was felt that a book was needed to examine and explain the underlying principles governing the diverse properties of these liquid crystal polymers, LCPs. The current work describes the diverse nature of LCPs, their synthesis, characterization, properties and finally their applications. It describes the manner in which liquid crystallinity or mesomorphism occurs in small molecules, monomer liquid crystals and polymer liquid crystals. Chapter 1 gives a classification of the various ways in which the meso gens may be connected to the polymer chains. Currently, the bulk of LCP material is based on main chain or longitudinal LCPs for use in engineering applications. The side chain or comb polymers are intended for use in electronics and opto-electronic systems and as surfactants. Many other variants and possibilities exist but their properties have not yet been fully studied or used. In this respect it is hoped that the current work will indicate future possibilities as well as discussing current opinion. v Preface vi Chapters 2 and 3 describe methods of characterizing the mesophases.
This text is a primer for liquid crystals, polymers, rubber and elasticity. It is directed at physicists, chemists, material scientists, engineers and applied mathematicians at the graduate student level and beyond.
Polymer Liquid Crystals covers the significant developments in the field of highlight oriented polymers. This 12-chapter book emerged from lectures presented during the seminar "Polymer Liquid Crystals: Science and Technology", held at Santa Margherita Ligure, Italy on May 19-23, 1981. The opening chapters highlight the molecular basis of liquid crystallinity. The subsequent chapters deal with the synthesis, structure, properties, and macroscopic phenomena of polymer liquid crystals. These topics are followed by descriptions of the orientation of liquid crystals, specifically the instabilities in low molecular weight nematic and cholesteric liquid crystals. The final chapters consider the applications of these crystals to display devices and the advances in high-strength fibers and molecular composites. This book will be of great value to polymer liquid crystal chemists and researchers.
Among the various new directions in modern polymer science, the design and investigation of liquid crystal (LC) polymers have been the ones growing most actively and fruitfully. In spite of that, the possible formation of an anisotropic LC phase was only demonstrated theoretically for the first time in the 1950s by Onsager [1] and Flory [2], and then experimentally verified in the studies with polypeptides solutions. In essence, the studies of these LC lyotropic systems did not deviate from the theme of purely academic interest. It was at the beginning of the 1970s that the experimental "explosion" occurred, when aromatic polyamides were synthesized and their ability to form LC solutions in certain very aggressive solvents was discovered. The search for practical applications of such LC systems was crowned with the successful creation of the new generation of ultrastrong high-modulus ther mostable fibers, such as the Kevlar, due to the high degree of order of the macromolecules in the anisotropic LC state. In fact, these investigations coincided with the swift emergence on the practical "scene" of thermotropic low-molar-mass liquid crystals, with the use of these materials in microelectronics and electro optics (figures and let ters indicators, displays in personal computers, and flat TV, etc.). Polymer scientists also began to develop methods of synthesizing thermotropic LC polymers by incorporating mesogenic fragments in the main (main-chain LC polymers) or side branchings of the macromolecules (side-chain or comb shaped polymers).
This book provides a comprehensive overview of various self-assemblies in liquid crystalline polymers and their electrical, optical, mechanical, and flame retardant properties. Liquid crystalline polymers are unique self-assembled, functional soft materials with electrical, magnetic, and thermal responses which find potential applications in numerous areas. As well as providing an overview of their synthesis, self-assembly and dynamics the various applications are also discussed. Such applications as liquid crystalline elastomers, light responsive actuators, optical reflectors, gas barrier films, and even flame retardant polymers will be presented. The book is a useful resource for undergraduates, postgraduates and experienced researchers.
Fluorinated Liquid Crystals: Design of Soft Nanostructures and Increased Complexity of Self-Assembly by Perfluorinated Segments, by Carsten Tschierske Liquid Crystalline Crown Ethers, by Martin Kaller and Sabine Laschat Star-Shaped Mesogens – Hekates: The Most Basic Star Structure with Three Branches, by Matthias Lehmann DNA-Based Soft Phases, by Tommaso Bellini, Roberto Cerbino and Giuliano Zanchetta Polar and Apolar Columnar Phases Made of Bent-Core Mesogens, by N. Vaupotič, D. Pociecha and E. Gorecka Spontaneous Achiral Symmetry Breaking in Liquid Crystalline Phases, by H. Takezoe Nanoparticles in Liquid Crystals and Liquid Crystalline Nanoparticles, by Oana Stamatoiu, Javad Mirzaei, Xiang Feng and Torsten Hegmann Stimuli-Responsive Photoluminescent Liquid Crystals, by Shogo Yamane, Kana Tanabe, Yoshimitsu Sagara and Takashi Kato
Offers a comprehensive review of the research and development of mechanically responsive materials and their applications in soft robots Mechanically Responsive Materials for Soft Robotics offers an authoritative guide to the current state of mechanically responsive materials for the development of soft robotics. With contributions from an international panel of experts, the book examines existing mechanically responsive materials such as crystals, polymers, gels, and composites that are stimulated by light and heat. The book also explores the application of mechanical materials to soft robotics. The authors describe the many excellent mechanical crystals developed in recent years that show the ability to bend, twist, rotate, jump, self-heal, and shape memory. Mechanical polymer materials are described for evolution into artificial muscles, photomobile materials, bioinspired soft actuators, inorganic-organic hybrid materials, multi-responsive composite materials, and strain sensor materials. The application of mechanical materials to soft robots is just the beginning. This book reviews the many challenging and versatile applications, such as soft microrobots made from photoresponsive elastomers, four-dimensional printing for assembling soft robots, self-growing of soft robots like plants, and biohybrid robots using muscle tissue. This important book: -Explores recent developments in the use of soft smart materials in robotic systems -Covers the full scope of mechanically responsive materials: polymers, crystals, gels, and nanocomposites -Deals with an interdisciplinary topic of advanced smart materials research -Contains extensive descriptions of current and future applications in soft robotics Written for materials scientists, polymer chemists, photochemists, physical chemists, solid state chemists, inorganic chemists, and robotics engineers, Mechanically Responsive Materials for Soft Robotics offers a comprehensive and timely review of the most recent research on mechanically responsive materials and the manufacture of soft robotics.
This textbook consists of six chapters. The first chapter highlights the concept of liquid crystals, including chemical structure, phase classification, defect and texture, and continuum theory. It has been carefully written to meet the needs of readers who do not specialize in liquid crystals. The second chapter is related to the theoretical description of liquid crystalline polymers, networks, and gels, which deals with subjects such as the formation of liquid crystallinity in the polymer system, the phase transition and phase diagram, the molecular weight effect, chain conformation, physics properties, etc. In Chapter 3, the molecular engineering of liquid crystalline polymers is introduced. The molecular composition and the molecular weight play essential roles in the molecular design, which are reviewed in detail. In addition, some unusual liquid crystalline polymers are discussed. Chapter 4 is devoted to the phase identification of liquid crystalline polymers. The techniques involved cover polarizing microscopy, thermal analysis, X-ray diffraction, and other areas. Chapters 5 and 6 summarize the properties and applications of liquid crystalline polymers: Chapter 5 deals mainly with mechanical performance in fiber and composites; Chapter 6 presents the elasticity, viscosity and rheology of liquid crystalline polymers, as well as other important properties.