Download Free Sic Materials And Devices Book in PDF and EPUB Free Download. You can read online Sic Materials And Devices and write the review.

Silicon carbide is known to have been investigated since 1907 when Captain H J Round demonstrated yellow and blue emission by applying bias between a metal needle and an SiC crystal. The potential of using SiC in semiconductor electronics was already recognized half a century ago. Despite its well-known properties, it has taken a few decades to overcome the exceptional technological difficulties of getting silicon carbide material to reach device quality and travel the road from basic research to commercialization.This second of two volumes reviews four important additional areas: the growth of SiC substrates; the deep defects in different SiC polytypes, which after many years of research still define the properties of bulk SiC and the performance and reliability of SiC devices; recent work on SiC JFETs; and the complex and controversial issues important for bipolar devices.Recognized leaders in the field, the contributors to this volume provide up-to-date reviews of further state-of-the-art areas in SiC technology and materials and device research.
This volume addresses the subject of materials science, specifically the materials aspects, device applications, and fabricating technology of SiC.
Silicon Carbide (SiC) is a wide-band-gap semiconductor biocompatible material that has the potential to advance advanced biomedical applications. SiC devices offer higher power densities and lower energy losses, enabling lighter, more compact and higher efficiency products for biocompatible and long-term in vivo applications ranging from heart stent coatings and bone implant scaffolds to neurological implants and sensors. The main problem facing the medical community today is the lack of biocompatible materials that are also capable of electronic operation. Such devices are currently implemented using silicon technology, which either has to be hermetically sealed so it cannot interact with the body or the material is only stable in vivo for short periods of time. For long term use (permanent implanted devices such as glucose sensors, brain-machine-interface devices, smart bone and organ implants) a more robust material that the body does not recognize and reject as a foreign (i.e., not organic) material is needed. Silicon Carbide has been proven to be just such a material and will open up a whole new host of fields by allowing the development of advanced biomedical devices never before possible for long-term use in vivo. This book not only provides the materials and biomedical engineering communities with a seminal reference book on SiC that they can use to further develop the technology, it also provides a technology resource for medical doctors and practitioners who are hungry to identify and implement advanced engineering solutions to their everyday medical problems that currently lack long term, cost effective solutions. - Discusses Silicon Carbide biomedical materials and technology in terms of their properties, processing, characterization, and application, in one book, from leading professionals and scientists - Critical assesses existing literature, patents and FDA approvals for clinical trials, enabling the rapid assimilation of important data from the current disparate sources and promoting the transition from technology research and development to clinical trials - Explores long-term use and applications in vivo in devices and applications with advanced sensing and semiconducting properties, pointing to new product devekipment particularly within brain trauma, bone implants, sub-cutaneous sensors and advanced kidney dialysis devices
In the 1950s Shockley predicted that SiC would quickly replace Si as a result of its superior material properties. In many ways he was right and today there is an active industry based on SiC, with new achievements being reported every year. This book reviews the progress achieved in SiC research and development, particularly over the past 10 years. It presents the essential properties of 3C-, 6H- and 4H-SiC polytypes including structural, electrical, optical, surface and interface properties; describes existing key SiC devices and also the challenges in materials growth and device fabrication of the 21st century. Overall it provides an up-to-date reference book suitable for a broad audience of newcomers, graduate students and engineers in industrial R&D.
After many years of research and development, silicon carbide has emerged as one of the most important wide band gap semiconductors. The first commercial SiC devices ? power switching Schottky diodes and high temperature MESFETs ? are now on the market. This two-volume book gives a comprehensive, up-to-date review of silicon carbide materials properties and devices. With contributions by recognized leaders in SiC technology and materials and device research, SiC Materials and Devices is essential reading for technologists, scientists and engineers who are working on silicon carbide or other wide band gap materials and devices. The volumes can also be used as supplementary textbooks for graduate courses on silicon carbide and wide band gap semiconductor technology.
Learn the latest advances in SiC (Silicon Carbide) technology from the leading experts in the field with this new cutting-edge resource. The book is your single source for in-depth information on both SiC device fabrication and system-level applications. This comprehensive reference begins with an examination of how SiC is grown and how defects in SiC growth can affect working devices. Key issues in selective doping of SiC via ion implantation are covered with special focus on implant conditions and electrical activation of implants. SiC applications discussed include chemical sensors, motor-control components, high-temperature gas sensors, and high-temperature electronics. By cutting through the arcane data and jargon surrounding the hype on SiC, this book gives an honest assessment of today's SiC technology and shows you how SiC can be adopted in developing tomorrow's applications.
A comprehensive introduction and up-to-date reference to SiC power semiconductor devices covering topics from material properties to applications Based on a number of breakthroughs in SiC material science and fabrication technology in the 1980s and 1990s, the first SiC Schottky barrier diodes (SBDs) were released as commercial products in 2001. The SiC SBD market has grown significantly since that time, and SBDs are now used in a variety of power systems, particularly switch-mode power supplies and motor controls. SiC power MOSFETs entered commercial production in 2011, providing rugged, high-efficiency switches for high-frequency power systems. In this wide-ranging book, the authors draw on their considerable experience to present both an introduction to SiC materials, devices, and applications and an in-depth reference for scientists and engineers working in this fast-moving field. Fundamentals of Silicon Carbide Technology covers basic properties of SiC materials, processing technology, theory and analysis of practical devices, and an overview of the most important systems applications. Specifically included are: A complete discussion of SiC material properties, bulk crystal growth, epitaxial growth, device fabrication technology, and characterization techniques. Device physics and operating equations for Schottky diodes, pin diodes, JBS/MPS diodes, JFETs, MOSFETs, BJTs, IGBTs, and thyristors. A survey of power electronics applications, including switch-mode power supplies, motor drives, power converters for electric vehicles, and converters for renewable energy sources. Coverage of special applications, including microwave devices, high-temperature electronics, and rugged sensors. Fully illustrated throughout, the text is written by recognized experts with over 45 years of combined experience in SiC research and development. This book is intended for graduate students and researchers in crystal growth, material science, and semiconductor device technology. The book is also useful for design engineers, application engineers, and product managers in areas such as power supplies, converter and inverter design, electric vehicle technology, high-temperature electronics, sensors, and smart grid technology.
This handbook presents the key properties of silicon carbide (SiC), the power semiconductor for the 21st century. It describes related technologies, reports the rapid developments and achievements in recent years, and discusses the remaining challenging issues in the field. The book consists of 15 chapters, beginning with a chapter by Professor W. J. Choyke, the leading authority in the field, and is divided into four sections. The topics include presolar SiC history, vapor-liquid-solid growth, spectroscopic investigations of 3C-SiC/Si, developments and challenges in the 21st century; CVD principles and techniques, homoepitaxy of 4H-SiC, cubic SiC grown on 4H-SiC, SiC thermal oxidation processes and MOS interface, Raman scattering, NIR luminescent studies, Mueller matrix ellipsometry, Raman microscopy and imaging, 4H-SiC UV photodiodes, radiation detectors, and short wavelength and synchrotron X-ray diffraction. This comprehensive work provides a strong contribution to the engineering, materials, and basic science knowledge of the 21st century, and will be of interest to material growers, designers, engineers, scientists, postgraduate students, and entrepreneurs.
After many years of research and development, silicon carbide has emerged as one of the most important wide band gap semiconductors. The first commercial SiC devices — power switching Schottky diodes and high temperature MESFETs — are now on the market. This two-volume book gives a comprehensive, up-to-date review of silicon carbide materials properties and devices. With contributions by recognized leaders in SiC technology and materials and device research, SiC Materials and Devices is essential reading for technologists, scientists and engineers who are working on silicon carbide or other wide band gap materials and devices. The volumes can also be used as supplementary textbooks for graduate courses on silicon carbide and wide band gap semiconductor technology.
Containing the most reliable parameter values for each of these semiconductor materials, along with applicable references, these data are organized in a structured, logical way for each semiconductor material. * Reviews traditional semiconductor materials as well as new, advanced semiconductors. * Essential authoritative handbook on the properties of semiconductor materials.