Download Free Sequential Monte Carlo Smoothing With Application To Parameter Estimation In Non Linear State Space Models Book in PDF and EPUB Free Download. You can read online Sequential Monte Carlo Smoothing With Application To Parameter Estimation In Non Linear State Space Models and write the review.

In these notes, we introduce particle filtering as a recursive importance sampling method that approximates the minimum-mean-square-error (MMSE) estimate of a sequence of hidden state vectors in scenarios where the joint probability distribution of the states and the observations is non-Gaussian and, therefore, closed-form analytical expressions for the MMSE estimate are generally unavailable. We begin the notes with a review of Bayesian approaches to static (i.e., time-invariant) parameter estimation. In the sequel, we describe the solution to the problem of sequential state estimation in linear, Gaussian dynamic models, which corresponds to the well-known Kalman (or Kalman-Bucy) filter. Finally, we move to the general nonlinear, non-Gaussian stochastic filtering problem and present particle filtering as a sequential Monte Carlo approach to solve that problem in a statistically optimal way. We review several techniques to improve the performance of particle filters, including importance function optimization, particle resampling, Markov Chain Monte Carlo move steps, auxiliary particle filtering, and regularized particle filtering. We also discuss Rao-Blackwellized particle filtering as a technique that is particularly well-suited for many relevant applications such as fault detection and inertial navigation. Finally, we conclude the notes with a discussion on the emerging topic of distributed particle filtering using multiple processors located at remote nodes in a sensor network. Throughout the notes, we often assume a more general framework than in most introductory textbooks by allowing either the observation model or the hidden state dynamic model to include unknown parameters. In a fully Bayesian fashion, we treat those unknown parameters also as random variables. Using suitable dynamic conjugate priors, that approach can be applied then to perform joint state and parameter estimation. Table of Contents: Introduction / Bayesian Estimation of Static Vectors / The Stochastic Filtering Problem / Sequential Monte Carlo Methods / Sampling/Importance Resampling (SIR) Filter / Importance Function Selection / Markov Chain Monte Carlo Move Step / Rao-Blackwellized Particle Filters / Auxiliary Particle Filter / Regularized Particle Filters / Cooperative Filtering with Multiple Observers / Application Examples / Summary
This book provides a general introduction to Sequential Monte Carlo (SMC) methods, also known as particle filters. These methods have become a staple for the sequential analysis of data in such diverse fields as signal processing, epidemiology, machine learning, population ecology, quantitative finance, and robotics. The coverage is comprehensive, ranging from the underlying theory to computational implementation, methodology, and diverse applications in various areas of science. This is achieved by describing SMC algorithms as particular cases of a general framework, which involves concepts such as Feynman-Kac distributions, and tools such as importance sampling and resampling. This general framework is used consistently throughout the book. Extensive coverage is provided on sequential learning (filtering, smoothing) of state-space (hidden Markov) models, as this remains an important application of SMC methods. More recent applications, such as parameter estimation of these models (through e.g. particle Markov chain Monte Carlo techniques) and the simulation of challenging probability distributions (in e.g. Bayesian inference or rare-event problems), are also discussed. The book may be used either as a graduate text on Sequential Monte Carlo methods and state-space modeling, or as a general reference work on the area. Each chapter includes a set of exercises for self-study, a comprehensive bibliography, and a “Python corner,” which discusses the practical implementation of the methods covered. In addition, the book comes with an open source Python library, which implements all the algorithms described in the book, and contains all the programs that were used to perform the numerical experiments.
Monte Carlo methods are revolutionizing the on-line analysis of data in many fileds. They have made it possible to solve numerically many complex, non-standard problems that were previously intractable. This book presents the first comprehensive treatment of these techniques.
Data assimilation is the process of estimating the state of dynamic systems (linear or nonlinear, Gaussian or non-Gaussian) as accurately as possible from noisy observational data. Although the Three Dimensional Variational (3D-VAR) methods, Four Dimensional Variational (4D-VAR) methods and Ensemble Kalman filter (EnKF) methods are widely used and effective for linear and Gaussian dynamics, new methods of data assimilation are required for the general situation, that is, nonlinear non-Gaussian dynamics. General Bayesian recursive estimation theory is reviewed in this thesis. The Bayesian estimation approach provides a rather general and powerful framework for handling nonlinear, non-Gaussian, as well as linear, Gaussian estimation problems. Despite a general solution to the nonlinear estimation problem, there is no closed-form solution in the general case. Therefore, approximate techniques have to be employed. In this thesis, the sequential Monte Carlo (SMC) methods, commonly referred to as the particle filter, is presented to tackle non-linear, non-Gaussian estimation problems. In this thesis, we use the SMC methods only for the nonlinear state estimation problem, however, it can also be used for the nonlinear parameter estimation problem. In order to demonstrate the new methods in the general nonlinear non-Gaussian case, we compare Sequential Monte Carlo (SMC) methods with the Ensemble Kalman Filter (EnKF) by performing data assimilation in nonlinear and non-Gaussian dynamic systems. The models used in this study are referred to as state-space models. The Lorenz 1963 and 1966 models serve as test beds for examining the properties of these assimilation methods when used in highly nonlinear dynamics. The application of Sequential Monte Carlo methods to different fixed parameters in dynamic models is considered. Four different scenarios in the Lorenz 1063 [sic] model and three different scenarios in the Lorenz 1996 model are designed in this study for both the SMC methods and EnKF method with different filter size from 50 to 1000. The comparison results show that the SMC methods have theoretical advantages and also work well with highly nonlinear Lorenz models for state estimation in practice. Although Ensemble Kalman Filter (EnKF) computes only the mean and the variance of the state, which is based on linear state-space models with Gaussian noise, the SMC methods do not outperform EnKF in practical applications as we expected in theoretical insights. The main drawback of Sequential Monte Carlo (SMC) methods is that it requires much computational power, which is the obstacle to extend SMC methods to high dimensional atmospheric and oceanic models. We try to interpret the reason why the SMC data assimilation result is similar to the EnKF data assimilation result in these experiments and discuss the potential future application for high dimensional realistic atmospheric and oceanic models in this thesis.
State-space models as an important mathematical tool has been widely used in many different fields. This edited collection explores recent theoretical developments of the models and their applications in economics and finance. The book includes nonlinear and non-Gaussian time series models, regime-switching and hidden Markov models, continuous- or discrete-time state processes, and models of equally-spaced or irregularly-spaced (discrete or continuous) observations. The contributed chapters are divided into four parts. The first part is on Particle Filtering and Parameter Learning in Nonlinear State-Space Models. The second part focuses on the application of Linear State-Space Models in Macroeconomics and Finance. The third part deals with Hidden Markov Models, Regime Switching and Mathematical Finance and the fourth part is on Nonlinear State-Space Models for High Frequency Financial Data. The book will appeal to graduate students and researchers studying state-space modeling in economics, statistics, and mathematics, as well as to finance professionals.
A central problem in numerous applications is estimating the unknown parameters of a system of ordinary differential equations (ODEs) from noisy measurements of a function of some of the states at discrete times. Formulating this dynamic inverse problem in a Bayesian statistical framework, state and parameter estimation can be performed using sequential Monte Carlo (SMC) methods, such as particle filters (PFs) and ensemble Kalman filters (EnKFs).Addressing the issue of particle retention in PF-SMC, we propose to solve ODE systems within a PF framework with higher order numerical integrators which can handle stiffness and to base the choice of the innovation variance on estimates of discretization errors. Using linear multistep method (LMM) numerical solvers in this context gives a handle on the stability and accuracy of propagation, and provides a natural and systematic way to rigorously estimate the innovation variance via well-known local error estimates.We explore computationally efficient implementations of LMM PF-SMC by considering parallelized and vectorized formulations. While PF algorithms are known to be amenable to parallelization due to the independent propagation of each particle, by formulating the problem in a vectorized fashion, it is possible to arrive at an implementation of the method which takes full advantage of multiple processors.We employ a variation of LMM PF-SMC in estimating unknown parameters of a tracer kinetics model from sequences of real positron emission tomography scan data. A combination of optimization and statistical inference is utilized: nonlinear least squares finds optimal starting values, which then act as hyperparameters in the Bayesian framework. The LMM PF-SMC algorithm is modified to allow variable time steps to accommodate the increase in time interval length between data measurements from beginning to end of the procedure, keeping the time step the same for each particle.We also apply the idea of linking innovation variance with numerical integration error estimates to EnKFs by employing a stochastic interpretation of the discretization error in numerical integrators, extending the technique to deterministic, large-scale nonlinear evolution models. The resulting algorithm, which introduces LMM time integrators into the EnKF framework, proves especially effective in predicting unmeasured system components.
Any financial asset that is openly traded has a market price. Except for extreme market conditions, market price may be more or less than a “fair” value. Fair value is likely to be some complicated function of the current intrinsic value of tangible or intangible assets underlying the claim and our assessment of the characteristics of the underlying assets with respect to the expected rate of growth, future dividends, volatility, and other relevant market factors. Some of these factors that affect the price can be measured at the time of a transaction with reasonably high accuracy. Most factors, however, relate to expectations about the future and to subjective issues, such as current management, corporate policies and market environment, that could affect the future financial performance of the underlying assets. Models are thus needed to describe the stochastic factors and environment, and their implementations inevitably require computational finance tools.