Download Free Sequential Bifurcation Trees To Chaos In Nonlinear Time Delay Systems Book in PDF and EPUB Free Download. You can read online Sequential Bifurcation Trees To Chaos In Nonlinear Time Delay Systems and write the review.

In this book, the global sequential scenario of bifurcation trees of periodic motions to chaos in nonlinear dynamical systems is presented for a better understanding of global behaviors and motion transitions for one periodic motion to another one. A 1-dimensional (1-D), time-delayed, nonlinear dynamical system is considered as an example to show how to determine the global sequential scenarios of the bifurcation trees of periodic motions to chaos. All stable and unstable periodic motions on the bifurcation trees can be determined. Especially, the unstable periodic motions on the bifurcation trees cannot be achieved from the traditional analytical methods, and such unstable periodic motions and chaos can be obtained through a specific control strategy. The sequential periodic motions in such a 1-D time-delayed system are achieved semi-analytically, and the corresponding stability and bifurcations are determined by eigenvalue analysis. Each bifurcation tree of a specific periodic motion to chaos are presented in detail. The bifurcation tree appearance and vanishing are determined by the saddle-node bifurcation, and the cascaded period-doubled periodic solutions are determined by the period-doubling bifurcation. From finite Fourier series, harmonic amplitude and harmonic phases for periodic motions on the global bifurcation tree are obtained for frequency analysis. Numerical illustrations of periodic motions are given for complex periodic motions in global bifurcation trees. The rich dynamics of the 1-D, delayed, nonlinear dynamical system is presented. Such global sequential periodic motions to chaos exist in nonlinear dynamical systems. The frequency-amplitude analysis can be used for re-construction of analytical expression of periodic motions, which can be used for motion control in dynamical systems.
The book is about the global stability and bifurcation of equilibriums in polynomial functional systems. Appearing and switching bifurcations of simple and higher-order equilibriums in the polynomial functional systems are discussed, and such bifurcations of equilibriums are not only for simple equilibriums but for higher-order equilibriums. The third-order sink and source bifurcations for simple equilibriums are presented in the polynomial functional systems. The third-order sink and source switching bifurcations for saddle and nodes are also presented, and the fourth-order upper-saddle and lower-saddle switching and appearing bifurcations are presented for two second-order upper-saddles and two second-order lower-saddles, respectively. In general, the (2 + 1)th-order sink and source switching bifurcations for (2)th-order saddles and (2 +1)-order nodes are also presented, and the (2)th-order upper-saddle and lower-saddle switching and appearing bifurcations are presented for (2)th-order upper-saddles and (2)th-order lower-saddles (, = 1,2,...). The vector fields in nonlinear dynamical systems are polynomial functional. Complex dynamical systems can be constructed with polynomial algebraic structures, and the corresponding singularity and motion complexity can be easily determined.
Cold atmospheric plasma (CAP) is a promising and rapidly emerging technology for a wide range of applications, from daily life to industry. CAP’s key advantage is its unique ability to effectively deliver reactive species to subjects including biological materials, liquid media, aerosols, and manufactured surfaces. This book assesses the state-of-art in CAP research and implementation for applications including agriculture, medicine, environment, materials, catalysis, and energy. The mechanisms of generation and transport of the key reactive species in the plasma are introduced and examined in the context of their applications. Opportunities and challenges for novel technologies, fresh ideas/concepts, expanded multidisciplinary study, and new applications are discussed. The authors’ vision for the converging trends across diverse disciplines is proposed to stimulate critical discussions, research directions, and collaborations.
The use of sensors and instrumentation for measuring and control is growing at a very rapid rate in all facets of life in today's world. This Part II of Instrumentation: Theory and Practice is designed to provide the reader with essential knowledge regarding a broad spectrum of sensors and transducers and their applications. This textbook is intended for use as an introductory one-semester course at the junior level of an undergraduate program. It is also very relevant for technicians, engineers, and researchers who had no formal training in instrumentation and wish to engage in experimental measurements. The prerequisites are: a basic knowledge of multivariable calculus, introductory physics, college algebra, and a familiarity with basic electrical circuits and components. This book emphasizes the use of simplified electrical circuits to convert the change in the measured physical variable into a voltage output signal. In each chapter, relevant sensors and their operation are presented and discussed at a fundamental level and are integrated with the essential mathematical theory in a simplified form. The book is richly illustrated with colored figures and images. End-of-chapter examples and problems complement the text in a simple and straight forward manner.
This book describes the Asymptotic Modal Analysis (AMA) method to predict the high-frequency vibroacoustic response of structural and acoustical systems. The AMA method is based on taking the asymptotic limit of Classical Modal Analysis (CMA) as the number of modes in the structural system or acoustical system becomes large in a certain frequency bandwidth. While CMA requires both the computation of individual modes and a modal summation, AMA evaluates the averaged modal response only at a center frequency of the bandwidth and does not sum the individual contributions from each mode to obtain a final result. It is similar to Statistical Energy Analysis (SEA) in this respect. However, while SEA is limited to obtaining spatial averages or mean values (as it is a statistical method), AMA is derived systematically from CMA and can provide spatial information as well as estimates of the accuracy of the solution for a particular number of modes. A principal goal is to present the state-of-the-art of AMA and suggest where further developments may be possible. A short review of the CMA method as applied to structural and acoustical systems subjected to random excitation is first presented. Then the development of AMA is presented for an individual structural system and an individual acoustic cavity system, as well as a combined structural-acoustic system. The extension of AMA for treating coupled or multi-component systems is then described, followed by its application to nonlinear systems. Finally, the AMA method is summarized and potential further developments are discussed.
The vapor compression cycle (VCC) underpins the vast majority of refrigeration systems throughout the world. Most undergraduate thermodynamics courses cover the VCC, albeit in a cursory fashion. This book is designed to offer an in-depth look at the analysis, design and operation of large-scale industrial ammonia-based refrigeration systems. An important feature of this work is a treatment of computer-aided analysis using CoolProp, an open source resource for evaluating thermodynamic properties. CoolProp can be incorporated into a large number of common computational platforms including Microsfot Excel, Python, and Matlab, all of which are covered in this book.
The vapor compression cycle (VCC) underpins the vast majority of refrigeration systems throughout the world. Most undergraduate thermodynamics courses cover the VCC, albeit in a cursory fashion. This book is designed to offer an in-depth look at the analysis, design and operation of large-scale industrial ammonia-based refrigeration systems. An important feature of this work is a treatment of computer-aided analysis using CoolProp, an open source resource for evaluating thermodynamic properties. CoolProp can be incorporated into a large number of common computational platforms including Microsfot Excel, Python, and Matlab, all of which are covered in this book.
This book is intended for students taking a Machine Design course leading to a Mechanical Engineering Technology degree. It can be adapted to a Machine Design course for Mechanical Engineering students or used as a reference for adopting systems engineering into a design course. The book introduces the fundamentals of systems engineering, the concept of synthesis, and the basics of trade-off studies. It covers the use of a functional flow block diagram to transform design requirements into the design space to identify all success modes. The book discusses fundamental stress analysis for structures under axial, torsional, or bending loads. In addition, the book discusses the development of analyzing shafts under combined loads by using Mohr’s circle and failure mode criterion. Chapter 3 provides an overview of fatigue and the process to develop the shaft-sizing equations under dynamic loading conditions. Chapter 4 discusses power equations and the nomenclature and stress analysis for spur and straight bevel gears and equations for analyzing gear trains. Other machine component topics include derivation of the disc clutch and its relationship to compression springs, derivation of the flat belt equations, roller and ball bearing life equations, roller chains, and keyways. Chapter 5 introduces the area of computational machine design and provides codes for developing simple and powerful computational methods to solve: cross product required to calculate the torques and bending moments on shafts, 1D stress analysis, reaction loads on support bearings, Mohr’s circle, shaft sizing under dynamic loading, and cone clutch. The final chapter shows how to integrate Systems Engineering into machine design for a capstone project as a project-based collaborative design methodology. The chapter shows how each design requirement is transformed through the design space to identify the proper engineering equations.
Capstone Design: Project Process and Reviews (Student Engineering Design Workbook) provides a brief overview of the design process as well as templates, tools, and student design notes. The goal of this workbook is to provide students in multiple disciplines with a systematic iterative process to follow in their Capstone Design projects and get feedback through design reviews. Students should treat this workbook as a working document and document individual/team decisions, make sketches of their concepts, and add additional design documentation. This workbook also assists in documenting student responsibility and accountability for individual contributions to the project. Freshman- and sophomore-level students may also find this workbook helpful for design projects. Finally, this workbook will also serve as an evaluation and assessment tool for the faculty mentor/advisor.
Fluid Mechanics is the study of liquid or gas behavior in motion or at rest. It is one of the fundamental branches of Engineering Mechanics, which is important to educate professional engineers of any major. Many of the engineering disciplines apply Fluid Mechanics principles and concepts. In order to absorb the materials of Fluid Mechanics, it is not enough just to consume theoretical laws and theorems. A student also must develop an ability to solve practical problems. Therefore, it is necessary to solve many problems independently. This book is a supplement to the Fluid Mechanics course in learning and applying the principles required to solve practical engineering problems in the following branches of Fluid Mechanics: Hydrostatics, Fluid Kinematics, Fluid Dynamics, Turbulent Flow and Gas Dynamics (Compressible Fluid Flow). This book contains practical problems in Fluid Mechanics, which are a complement to Fluid Mechanics textbooks. The book is the product of material covered in many classes over a period of four decades at several universities. It consists of 18 sets of problems where students are introduced to various topics of the Fluid Mechanics. Each set involves 30 problems, which can be assigned as individual homework as well as test/exam problems. The solution of a similar problem for each set is provided. The sequence of the topics and some of the problems were adopted from Fluid Mechanics by R. C. Hibbeler, 2nd edition, 2018, Pearson.