Download Free Seismic Isolation For Earthquake Resistant Structures Book in PDF and EPUB Free Download. You can read online Seismic Isolation For Earthquake Resistant Structures and write the review.

Ground motion due to earthquake excitation often induces disastrous disturbances that severely damage structures and their contents. Conventional earthquake-resistant design focuses on the strengthening of structures to avoid collapse, while little attention is paid to the prevention of damage as it is almost impossible to construct completely earthquake proof structures at reasonable cost. This state-of-the-art volume explores seismic isolation as an alternative and performance-based design approach to minimise earthquake induced loads and resulting damage in low to medium-rise buildings. A discussion of the characteristics, advantages and limitations of seismic isolation is followed by a demonstration of its capability to decouple a structure from the damaging effects of ground acceleration. Describes currently used seismic isolation systems in detail. Evaluates the performance of seismically isolated structures and provides examples of their response under earthquake action. Proposes a preliminary design methodology for seismically isolated structures. Accessible to both students and practising structural engineers who need to familiarise themselves with this approach.
Complete, practical coverage of the evaluation, analysis, and design and code requirements of seismic isolation systems. Based on the concept of reducing seismic demand rather than increasing the earthquake resistance capacity of structures, seismic isolation is a surprisingly simple approach to earthquake protection. However, proper application of this technology within complex seismic design code requirements is both complicated and difficult. Design of Seismic Isolated Structures provides complete, up-to-date coverage of seismic isolation, complete with a systematic development of concepts in theory and practical application supplemented by numerical examples. This book helps design professionals navigate and understand the ideas and procedures involved in the analysis, design, and development of specifications for seismic isolated structures. It also provides a framework for satisfying code requirements while retaining the favorable cost-effective and damage control aspects of this new technology. An indispensable resource for practicing and aspiring engineers and architects, Design of Seismic Isolated Structures includes: * Isolation system components. * Complete coverage of code provisions for seismic isolation. * Mechanical characteristics and modeling of isolators. * Buckling and stability of elastomeric isolators. * Examples of seismic isolation designs. * Specifications for the design, manufacture, and testing of isolation devices.
This book explores the area of seismic isolation strategies for earthquake-resistant construction. It covers topics such as dampers for earthquake protection of existing buildings and for displacements restraints in seismically isolated buildings, innovative base isolation strategies for seismic retrofitting of existing frame and stone buildings, comparative analysis of innovative base isolation, and other topics
My involvement in the use of natural rubber as a method for the protec 1976. At that time, tion of buildings against earthquake attack began in I was working on the development of energy-dissipating devices for the same purpose and had developed and tested a device that was even tually used in a stepping-bridge structure, this being a form of partial isolation. It became clear to me that in order to use these energy devices for the earthquake protection of buildings, it would be best to combine them with an isolation system which would give them the large displace ments needed to develop sufficient hysteresis. At this appropriate point in time, I was approached by Dr. C. J. Derham, then of the Malaysian Rubber Producers' Research Association (MRPRA), who asked if I was interested in looking at the possibility of conducting shaking table tests at the Earthquake Simulator Laboratory to see to what extent natural rubber bearings could be used to protect buildings from earthquakes. Very soon after this meeting, we were able to do such a test using a 20-ton model and hand-made isolators. The eady tests were very promising. Accordingly, a further set of tests was done with a more realistic five storey model weighing 40 tons with bearings that were commercially made. In both of the test series, the isolators were used both alone and with a number of different types of energy-dissipating devices to en hance damping.
This book features chapters based on selected presentations from the International Congress on Advanced Earthquake Resistance of Structures, AERS2016, held in Samsun, Turkey, from 24 to 28 October 2016. It covers the latest advances in three widely popular research areas in Earthquake Engineering: Performance-Based Seismic Design, Seismic Isolation Systems, and Structural Health Monitoring. The book shows the vulnerability of high-rise and seismically isolated buildings to long periods of strong ground motions, and proposes new passive and semi-active structural seismic isolation systems to protect against such effects. These systems are validated through real-time hybrid tests on shaking tables. Structural health monitoring systems provide rapid assessment of structural safety after an earthquake and allow preventive measures to be taken, such as shutting down the elevators and gas lines, before damage occurs. Using the vibration data from instrumented tall buildings, the book demonstrates that large, distant earthquakes and surface waves, which are not accounted for in most attenuation equations, can cause long-duration shaking and damage in tall buildings. The overview of the current performance-based design methodologies includes discussions on the design of tall buildings and the reasons common prescriptive code provisions are not sufficient to address the requirements of tall-building design. In addition, the book explains the modelling and acceptance criteria associated with various performance-based design guidelines, and discusses issues such as selection and scaling of ground motion records, soil-foundation-structure interaction, and seismic instrumentation and peer review needs. The book is of interest to a wide range of professionals in earthquake engineering, including designers, researchers, and graduate students.
This edition is based on the work of NCHRP project 20-7, task 262 and updates the 2nd (1999) edition -- P. ix.
This handbook contains up-to-date existing structures, computer applications, and infonnation on planning, analysis, and design seismic design of wood structures. A new and very useful feature of this edition of earthquake-resistant building structures. Its intention is to provide engineers, architects, is the inclusion of a companion CD-ROM disc developers, and students of structural containing the complete digital version of the handbook itself and the following very engineering and architecture with authoritative, yet practical, design infonnation. It represents important publications: an attempt to bridge the persisting gap between l. UBC-IBC (1997-2000) Structural advances in the theories and concepts of Comparisons and Cross References, ICBO, earthquake-resistant design and their 2000. implementation in seismic design practice. 2. NEHRP Guidelines for the Seismic The distinguished panel of contributors is Rehabilitation of Buildings, FEMA-273, Federal Emergency Management Agency, composed of 22 experts from industry and universities, recognized for their knowledge and 1997. extensive practical experience in their fields. 3. NEHRP Commentary on the Guidelinesfor They have aimed to present clearly and the Seismic Rehabilitation of Buildings, FEMA-274, Federal Emergency concisely the basic principles and procedures pertinent to each subject and to illustrate with Management Agency, 1997. practical examples the application of these 4. NEHRP Recommended Provisions for principles and procedures in seismic design Seismic Regulations for New Buildings and practice. Where applicable, the provisions of Older Structures, Part 1 - Provisions, various seismic design standards such as mc FEMA-302, Federal Emergency 2000, UBC-97, FEMA-273/274 and ATC-40 Management Agency, 1997.
Introducing important concepts in the study of earthquakes related to retrofitting of structures to be made earthquake resistant. The book investigates the pounding effects on base-isolated buildings, the soil-structure-interaction effects on adjacent buildings due to the impact, the seismic protection of adjacent buildings and the mitigation of earthquakeinduced vibrations of two adjacent structures. These concepts call for a new understanding of controlled systems with passive-active dampers and semi-active dampers. The passive control strategy of coupled buildings is investigated for seismic protection in comparison to active and semi-active control strategies.
Seismic isolation offers the highest degree of earthquake protection to buildings and their inhabitants. Modern applications of the technology are less than 50 years old and uptake in seismically active regions continues to soar. Seismic Isolation for Architects is a comprehensive introduction to the theory and practice in this field. Based on the latest research findings and the authors’ extensive experience, coverage includes the application, effectiveness, benefits, and limitations of seismic isolation, as well as the architectural form, design aspects, retrofitting, economics, construction, and maintenance related to this method. The book is written for an international audience: the authors review codes and practices from a number of countries and draw on examples from eleven territories including the US, Chile, Argentina, Italy, Japan, and New Zealand. Aimed at readers without prior knowledge of structural engineering, the book provides an accessible, non-technical approach without using equations or calculations, instead using over 200 drawings, diagrams and images to support the text. This book is key reading for students on architecture and civil engineering courses looking for a clear introduction to seismic-resistant design, as well as architects and engineers working in seismically active regions.