Download Free Scrape Off Layer Flows Magnetic Topology And Influence On The L H Threshold In A Tokamak Book in PDF and EPUB Free Download. You can read online Scrape Off Layer Flows Magnetic Topology And Influence On The L H Threshold In A Tokamak and write the review.

The dependence of L-H power threshold on magnetic topology (upper-, lower-null) in a tokamak is linked to near-sonic plasma flows in the high-field side scrape-off layer. Scrape-off layer flow momentum, coupling across the separatrix, imparts a topology-dependent increment to edge and core toroidal rotation (counter-, co-current). In all topologies, rotation increases in the co-current direction with input power: the L-H transition is seen when co-rotation achieves a characteristic level. Correspondingly, higher power is required to attain H-modes in upper- versus lower-null (with BxGradB down).
(Cont.) Experiments suggest that topology-dependent flow boundary conditions may also play a role in the sensitivity of L-H power threshold to x-point location: in a set of otherwise similar discharges, the L-H transition is seen to be coincident with central rotation achieving roughly the same value, independent of magnetic topology. For discharges with BxGradB pointing away from the x-point (i.e., with the SOL flow boundary condition impeding co-current rotation), the same characteristic rotation can only be achieved with higher input power.
Recent interest in the experimental study of tokamak plasma flow for different magnetic field geometries calls for theoretical understanding of the effects of tokamak magnetic topology changes on the flow. The consequences of total magnetic field reversal and/or X-point reversal on divergence-free plasma flow within magnetic flux surfaces are considered and the results are applied to interpret recent Alcator C-Mod scrape-off layer flow measurements. In his comment to that work, Aydemir asserted that poloidal plasma flow reversal is not a valid response to toroidal magnetic field reversal in an up-down symmetric tokamak, and that the toroidal plasma flow must reverse instead. We show that this assertion is wrong due to his misunderstanding of the corresponding symmetry transformation.
Applying resonant magnetic perturbations (RMPs) to control edge localized modes in tokamak plasmas raises the L-H transition power threshold, potentially inhibiting H-mode access in next-step, reactor-scale tokamaks. Detailed 2D turbulence measurements on the DIII-D tokamak show how RMPs alter the turbulence-flow dynamics that are thought to trigger the L-H transition, thereby raising the power threshold. Long-wavelength density fluctuations are measured using the beam emission spectroscopy (BES) diagnostic. Velocimetry analysis is applied to images of these density fluctuations to infer the 2D turbulent flow field. Detailed tests of velocimetry analysis are performed using synthetic turbulence images and nonlinear gyrokinetic simulations to validate the technique and optimize it for DIII-D experimental parameters. The turbulence-flow measurements show that RMPs simultaneously raise the turbulence decorrelation rate and reduce the flow shear rate in the stationary L-mode state preceding the L-H transition, thereby disrupting the turbulence shear suppression mechanism. This implies significantly more transient turbulence suppression is needed to trigger the L-H transition, which requires more heating power. RMPs also reduce the Reynolds stress drive for poloidal flow, contributing to the reduction of the flow shear rate. On the fast, ~100 [mu]s timescale of the L-H transition, RMPs reduce Reynolds-stress-driven energy transfer from turbulence to flows by an order of magnitude, challenging the energy depletion theory for the L-H trigger mechanism. In contrast, non-resonant magnetic perturbations, which do not significantly affect the power threshold, do not affect the turbulence decorrelation rate and only slightly reduce the flow shear rate and Reynolds-stress-driven energy transfer.
The promise of a vast and clean source of thermal power drove physics research for over fifty years and has finally come to collimation with the international consortium led by the European Union and Japan, with an agreement from seven countries to build a definitive test of fusion power in ITER. It happened because scientists since the Manhattan project have envisioned controlled nuclear fusion in obtaining energy with no carbon dioxide emissions and no toxic nuclear waste products.This large toroidal magnetic confinement ITER machine is described from confinement process to advanced physics of plasma-wall interactions, where pulses erupt from core plasma blistering the machine walls. Emissions from the walls reduce the core temperature which must remain ten times hotter than the 15 million degree core solar temperature to maintain ITER fusion power. The huge temperature gradient from core to wall that drives intense plasma turbulence is described in detail.Also explained are the methods designed to limit the growth of small magnetic islands, the growth of edge localized plasma plumes and the solid state physics limits of the stainless steel walls of the confinement vessel from the burning plasma. Designs of the wall coatings and the special 'exhaust pipe' for spent hot plasma are provided in two chapters. And the issues associated with high-energy neutrons — about 10 times higher than in fission reactions — and how they are managed in ITER, are detailed.
Magnetic Fusion Technology describes the technologies that are required for successful development of nuclear fusion power plants using strong magnetic fields. These technologies include: • magnet systems, • plasma heating systems, • control systems, • energy conversion systems, • advanced materials development, • vacuum systems, • cryogenic systems, • plasma diagnostics, • safety systems, and • power plant design studies. Magnetic Fusion Technology will be useful to students and to specialists working in energy research.
Introduction to Plasma Physics is the standard text for an introductory lecture course on plasma physics. The text’s six sections lead readers systematically and comprehensively through the fundamentals of modern plasma physics. Sections on single-particle motion, plasmas as fluids, and collisional processes in plasmas lay the groundwork for a thorough understanding of the subject. The authors take care to place the material in its historical context for a rich understanding of the ideas presented. They also emphasize the importance of medical imaging in radiotherapy, providing a logical link to more advanced works in the area. The text includes problems, tables, and illustrations as well as a thorough index and a complete list of references.
Resulting from ongoing, international research into fusion processes, the International Tokamak Experimental Reactor (ITER) is a major step in the quest for a new energy source.The first graduate-level text to cover the details of ITER, Controlled Fusion and Plasma Physics introduces various aspects and issues of recent fusion research activ
The Joint Varenna-Lausanne International Workshop on Theory of Fusion Plasmas takes place every other year in a place particularly favorable for informal and in depth discussions. Invited and contributed papers present state-of-the art researches in theoretical plasma physics, covering all domains relevant to fusion plasmas. This workshop always allows a fruitful mix of experienced researchers and students, to allow for a better understanding of the key theoretical physics models and applications, such as: Theoretical issues related to burning plasmas; Anomalous Transport (Turbulence, Coherent Structures, Microinstabilities) RF Heating and Current Drive; Macroinstabilities; Plasma-Edge Physics and Divertors; Fast particles instabilities.