Download Free Scientific Basis For Nuclear Waste Management 5 Proceedings Book in PDF and EPUB Free Download. You can read online Scientific Basis For Nuclear Waste Management 5 Proceedings and write the review.

Focused attention by world leaders is needed to address the substantial challenges posed by disposal of spent nuclear fuel from reactors and high-level radioactive waste from processing such fuel. The biggest challenges in achieving safe and secure storage and permanent waste disposal are societal, although technical challenges remain. Disposition of radioactive wastes in a deep geological repository is a sound approach as long as it progresses through a stepwise decision-making process that takes advantage of technical advances, public participation, and international cooperation. Written for concerned citizens as well as policymakers, this book was sponsored by the U.S. Department of Energy, U.S. Nuclear Regulatory Commission, and waste management organizations in eight other countries.
During late 1978, a symposium entitled "Science Underlying Radioactive Waste Management" was one component of the Annual Meet ing of the Materials Research Society held in Boston, Massachusetts. The purpose of this Symposium was to bring together for the first time the entire range of sciences that form the basis for the treatment, solidification and isolation of radioactive wastes. Some 79 papers were presented to an international audience of over 300. The Symposium was such an impressive success that another will be held at the 1979 Annual Meeting of the Materials Research Society. The proceedings of the forthcoming symposium will also be published and it is for this reason that the present volume has been desig nated Volume 1. The scope of the Symposium was defined by the following steer ing committee: Rustum Roy, The Pennsylvania State University (Chairman) Richard S. Claassen, Sandia Laboratories Don Ferguson, Oak Ridge National Laboratory Victor I. Spitsyn, U.S.S.R. Academy of Sciences, Moscow David B. Stewart, United States Geological Survey Torbjorn Westermark, Royal Institute of Technology, Stockholm. The program was organized by the following committee: Gregory J. McCarthy, The Pennsylvania State University (Cha- man) Harry C. Burkholder, Battelle Memorial Institute Arnold M. Friedman~ Argonne National Laboratory Werner Lutze, Hahn-Meitner Institut, Berlin John G. Moore, Oak Ridge National Laboratory Robert W. Potter, II, United States Geological Survey Richard L. Schwoebe1, Sandia Laboratories Roger W. Staehle, Ohio State University.
Over the past decade significant progress has been achieved in the development of waste characterization and control procedures and equipment as a direct response to ever-increasing requirements for quality and reliability of information on waste characteristics. Failure in control procedures at any step can have important, adverse consequences and may result in producing waste packages which are not compliant with the waste acceptance criteria for disposal, thereby adversely impacting the repository. The information and guidance included in this publication corresponds to recent achievements and reflects the optimum approaches, thereby reducing the potential for error and enhancing the quality of the end product. -- Publisher's description.
This new report from the National Research Council's Nuclear and Radiation Studies Board (NRSB) and the Transportation Research Board reviews the risks and technical and societal concerns for the transport of spent nuclear fuel and high-level radioactive waste in the United States. Shipments are expected to increase as the U.S. Department of Energy opens a repository for spent fuel and high-level waste at Yucca Mountain, and the commercial nuclear industry considers constructing a facility in Utah for temporary storage of spent fuel from some of its nuclear waste plants. The report concludes that there are no fundamental technical barriers to the safe transport of spent nuclear fuel and high-level radioactive and the radiological risks of transport are well understood and generally low. However, there are a number of challenges that must be addressed before large-quantity shipping programs can be implemented successfully. Among these are managing "social" risks. The report does not provide an examination of the security of shipments against malevolent acts but recommends that such an examination be carried out.
Drawing on the authors' extensive experience in the processing and disposal of waste, An Introduction to Nuclear Waste Immobilisation, Second Edition examines the gamut of nuclear waste issues from the natural level of radionuclides in the environment to geological disposal of waste-forms and their long-term behavior. It covers all-important aspects of processing and immobilization, including nuclear decay, regulations, new technologies and methods. Significant focus is given to the analysis of the various matrices used, especially cement and glass, with further discussion of other matrices such as bitumen. The final chapter concentrates on the performance assessment of immobilizing materials and safety of disposal, providing a full range of the resources needed to understand and correctly immobilize nuclear waste.
As oil reserves decline and the environment takes centre stage in public policy discussions, the merits and dangers of nuclear power and nuclear waste management are once again being debated. Nuclear Waste Management in Canada provides a critical counterpoint to the position of government and industry by examining not only the technical but also the social and ethical aspects of the issue. What do frequently used terms such as safety, risk, and acceptability really mean? And how and why did the public consultation process in Canada fail to address ethical and social issues? This timely collection defuses the uncertainty, ambiguity, and ignorance that surrounds discussions of nuclear energy.
The Department of Energy's Office of Environmental Management (DOE-EM) is responsible for cleaning up radioactive waste and environmental contamination resulting from five decades of nuclear weapons production and testing. A major focus of this program involves the retrieval, processing, and immobilization of waste into stable, solid waste forms for disposal. Waste Forms Technology and Performance, a report requested by DOE-EM, examines requirements for waste form technology and performance in the cleanup program. The report provides information to DOE-EM to support improvements in methods for processing waste and selecting and fabricating waste forms. Waste Forms Technology and Performance places particular emphasis on processing technologies for high-level radioactive waste, DOE's most expensive and arguably most difficult cleanup challenge. The report's key messages are presented in ten findings and one recommendation.
Safety and environmental impact is of uppermost concern when dealing with the movement and storage of nuclear waste. The 20 chapters in 'An Introduction to Nuclear Waste Immobilisation' cover all important aspects of immobilisation, from nuclear decay, to regulations, to new technologies and methods. Significant focus is given to the analysis of the various matrices used in transport: cement, bitumen and glass, with the greatest attention being given to glass. The last chapter concentrates on the performance assessment of each matrix, and on new developments of ceramics and glass composite materials, thermochemical methods and in-situ metal matrix immobilisation. The book thoroughly covers all issues surrounding nuclear waste: from where to locate nuclear waste in the environment, through nuclear waste generation and sources, treatment schemes and technologies, immobilisation technologies and waste forms, disposal and long term behaviour. Particular attention is paid to internationally approved and worldwide-applied approaches and technologies.* Each chapter focuses on a different matrix used in nuclear waste immobilisation: Cement, bitumen, glass and new materials.* Keeps the most important issues surrounding nuclear waste – such as treatment schemes and technologies, and disposal - at the forefront.
During the next several years, decisions are expected to be made in several countries on the further development and implementation of the geological disposition option. The Board on Radioactive Waste Management (BRWM) of the U.S. National Academies believes that informed and reasoned discussion of relevant scientific, engineering and social issues can-and should-play a constructive role in the decision process by providing information to decision makers on relevant technical and policy issues. A BRWM-initiated project including a workshop at Irvine, California on November 4-5, 1999, and subsequent National Academies' report to be published in spring, 2000, are intended to provide such information to national policy makers both in the U.S. and abroad. To inform national policies, it is essential that experts from the physical, geological, and engineering sciences, and experts from the policy and social science communities work together. Some national programs have involved social science and policy experts from the beginning, while other programs have only recently recognized the importance of this collaboration. An important goal of the November workshop is to facilitate dialogue between these communities, as well as to encourage the sharing of experiences from many national programs. The workshop steering committee has prepared this discussion for participants at the workshop. It should elicit critical comments and help identify topics requiring in-depth discussion at the workshop. It is not intended as a statement of findings, conclusions, or recommendations. It is rather intended as a vehicle for stimulating dialogue among the workshop participants. Out of that dialogue will emerge the findings, conclusions, and recommendations of the National Academies' report.