Download Free Safety Analysis Of Enriched Uranium Processing Book in PDF and EPUB Free Download. You can read online Safety Analysis Of Enriched Uranium Processing and write the review.

Originally published in 1983, this book presents both the technical and political information necessary to evaluate the emerging threat to world security posed by recent advances in uranium enrichment technology. Uranium enrichment has played a relatively quiet but important role in the history of efforts by a number of nations to acquire nuclear weapons and by a number of others to prevent the proliferation of nuclear weapons. For many years the uranium enrichment industry was dominated by a single method, gaseous diffusion, which was technically complex, extremely capital-intensive, and highly inefficient in its use of energy. As long as this remained true, only the richest and most technically advanced nations could afford to pursue the enrichment route to weapon acquisition. But during the 1970s this situation changed dramatically. Several new and far more accessible enrichment techniques were developed, stimulated largely by the anticipation of a rapidly growing demand for enrichment services by the world-wide nuclear power industry. This proliferation of new techniques, coupled with the subsequent contraction of the commercial market for enriched uranium, has created a situation in which uranium enrichment technology might well become the most important contributor to further nuclear weapon proliferation. Some of the issues addressed in this book are: A technical analysis of the most important enrichment techniques in a form that is relevant to analysis of proliferation risks; A detailed projection of the world demand for uranium enrichment services; A summary and critique of present institutional non-proliferation arrangements in the world enrichment industry, and An identification of the states most likely to pursue the enrichment route to acquisition of nuclear weapons.
This book is the product of a congressionally mandated study to examine the feasibility of eliminating the use of highly enriched uranium (HEU2) in reactor fuel, reactor targets, and medical isotope production facilities. The book focuses primarily on the use of HEU for the production of the medical isotope molybdenum-99 (Mo-99), whose decay product, technetium-99m3 (Tc-99m), is used in the majority of medical diagnostic imaging procedures in the United States, and secondarily on the use of HEU for research and test reactor fuel. The supply of Mo-99 in the U.S. is likely to be unreliable until newer production sources come online. The reliability of the current supply system is an important medical isotope concern; this book concludes that achieving a cost difference of less than 10 percent in facilities that will need to convert from HEU- to LEU-based Mo-99 production is much less important than is reliability of supply.
The decay product of the medical isotope molybdenum-99 (Mo-99), technetium-99m (Tc-99m), and associated medical isotopes iodine-131 (I-131) and xenon-133 (Xe-133) are used worldwide for medical diagnostic imaging or therapy. The United States consumes about half of the world's supply of Mo-99, but there has been no domestic (i.e., U.S.-based) production of this isotope since the late 1980s. The United States imports Mo-99 for domestic use from Australia, Canada, Europe, and South Africa. Mo-99 and Tc-99m cannot be stockpiled for use because of their short half-lives. Consequently, they must be routinely produced and delivered to medical imaging centers. Almost all Mo-99 for medical use is produced by irradiating highly enriched uranium (HEU) targets in research reactors, several of which are over 50 years old and are approaching the end of their operating lives. Unanticipated and extended shutdowns of some of these old reactors have resulted in severe Mo-99 supply shortages in the United States and other countries. Some of these shortages have disrupted the delivery of medical care. Molybdenum-99 for Medical Imaging examines the production and utilization of Mo-99 and associated medical isotopes, and provides recommendations for medical use.
The production of nuclear materials for the national defense was an intense, nationwide effort that began with the Manhattan Project and continued throughout the Cold War. Now many of these product materials, by-products, and precursors, such as irradiated nuclear fuels and targets, have been declared as excess by the Department of Energy (DOE). Most of this excess inventory has been, or will be, turned over to DOE's Office of Environmental Management (EM), which is responsible for cleaning up the former production sites. Recognizing the scientific and technical challenges facing EM, Congress in 1995 established the EM Science Program (EMSP) to develop and fund directed, long-term research that could substantially enhance the knowledge base available for new cleanup technologies and decision making. The EMSP has previously asked the National Academies' National Research Council for advice for developing research agendas in subsurface contamination, facility deactivation and decommissioning, high-level waste, and mixed and transuranic waste. For this study the committee was tasked to provide recommendations for a research agenda to improve the scientific basis for DOE's management of its high-cost, high-volume, or high-risk excess nuclear materials and spent nuclear fuels. To address its task, the committee focused its attention on DOE's excess plutonium-239, spent nuclear fuels, cesium-137 and strontium-90 capsules, depleted uranium, and higher actinide isotopes.
Plutonium and highly enriched uranium (HEU) are the basic materials used in nuclear weapons. Plutonium also plays an important part in the generation of nuclear electricity. Knowing how much plutonium and HEU exists, where and in which form is vital for international security and nuclear commerce. This book is a thorough revision of the World Inventory of Plutonium and highly Enriched Uranium, 1992. It provides a rigorous and comprehensive assessment of the amounts of plutonium and HEU in military and civilian programmes, in nuclear and non-nuclear weapon states, and in countries seeking to acquire nuclear weapons. The capibilities that exist for producing these materials around the world are examined in depth, as are the policy issues raised by them. Containing much new information, this book is indispensable to all those concerned with the great contemporary issues in international nuclear relations: arms reductions in the nuclear weapon states, nuclear proliferation, nuclear smuggling, the roles of plutonium and enriched uranium in the nuclear fuel-cycle, and the disposition of surplus weapon material.
Global energy demands are driving a potential expansion in the use of nuclear energy worldwide. It is estimated that the global nuclear power capacity could double by 2030. This could result in dissemination of sensitive nuclear technologies that present obvious risks of proliferation. Certain international institutional mechanisms for controlling access to sensitive materials, facilities and technologies are needed for dealing with this problem. Over the past few years, 12 proposals have been put forward by states, nuclear industry and international organizations, aimed at checking the spread of uranium enrichment and spent fuel reprocessing technologies. This book presents an overview and analysis of these proposals, including an evaluation of the projected international mechanisms.
This report contains the first International Atomic Energy Agency projection of uranium supply and demand to 2050 and provides an understanding of how some alternative uranium supply scenarios could evolve over the period. The analysis is based on the current knowledge of uranium resources and production facilities, and takes into account the premise that they can operate with minimal environmental impact and employ the best practices in planning, operations, decommissioning and closure.
This Safety Report has been developed as part of the IAEA programme on occupational radiation protection to provide for the application of its safety standards in implementing a graded approach to the protection of workers against exposures associated with uranium mining and processing. The publication describes the methods of production associated with the uranium industry and provides practical information on the radiological risks to workers in the exploration, mining and processing of uranium. It is a compilation of detailed information on uranium mining and processing stages and techniques, general radiation protection considerations in the relevant industry, general methodology applicable for control, monitoring and dose assessment, exposure pathways, and radiation protection programs for the range of commonly used mining and processing techniques.