Download Free Routingflow And Capacity Design In Communication And Computer Networks Book in PDF and EPUB Free Download. You can read online Routingflow And Capacity Design In Communication And Computer Networks and write the review.

In network design, the gap between theory and practice is woefully broad. This book narrows it, comprehensively and critically examining current network design models and methods. You will learn where mathematical modeling and algorithmic optimization have been under-utilized. At the opposite extreme, you will learn where they tend to fail to contribute to the twin goals of network efficiency and cost-savings. Most of all, you will learn precisely how to tailor theoretical models to make them as useful as possible in practice.Throughout, the authors focus on the traffic demands encountered in the real world of network design. Their generic approach, however, allows problem formulations and solutions to be applied across the board to virtually any type of backbone communication or computer network. For beginners, this book is an excellent introduction. For seasoned professionals, it provides immediate solutions and a strong foundation for further advances in the use of mathematical modeling for network design. - Written by leading researchers with a combined 40 years of industrial and academic network design experience. - Considers the development of design models for different technologies, including TCP/IP, IDN, MPLS, ATM, SONET/SDH, and WDM. - Discusses recent topics such as shortest path routing and fair bandwidth assignment in IP/MPLS networks. - Addresses proper multi-layer modeling across network layers using different technologies—for example, IP over ATM over SONET, IP over WDM, and IDN over SONET. - Covers restoration-oriented design methods that allow recovery from failures of large-capacity transport links and transit nodes. - Presents, at the end of each chapter, exercises useful to both students and practitioners.
Traditionally, networking has had little or no basis in analysis or architectural development, with designers relying on technologies they are most familiar with or being influenced by vendors or consultants. However, the landscape of networking has changed so that network services have now become one of the most important factors to the success of many third generation networks. It has become an important feature of the designer's job to define the problems that exist in his network, choose and analyze several optimization parameters during the analysis process, and then prioritize and evaluate these parameters in the architecture and design of the system. Network Analysis, Architecture, and Design, Third Edition, uses a systems methodology approach to teaching these concepts, which views the network (and the environment it impacts) as part of the larger system, looking at interactions and dependencies between the network and its users, applications, and devices. This approach matches the new business climate where customers drive the development of new services and the book discusses how networks can be architected and designed to provide many different types of services to customers. With a number of examples, analogies, instructor tips, and exercises, this book works through the processes of analysis, architecture, and design step by step, giving designers a solid resource for making good design decisions. With examples, guidelines, and general principles McCabe illuminates how a network begins as a concept, is built with addressing protocol, routing, and management, and harmonizes with the interconnected technology around it. Other topics covered in the book are learning to recognize problems in initial design, analyzing optimization parameters, and then prioritizing these parameters and incorporating them into the architecture and design of the system. This is an essential book for any professional that will be designing or working with a network on a routine basis. - Substantially updated design content includes ad hoc networks, GMPLS, IPv6, and mobile networking - Written by an expert in the field that has designed several large-scale networks for government agencies, universities, and corporations - Incorporates real-life ideas and experiences of many expert designers along with case studies and end-of-chapter exercises
This important text addresses the latest issues in end-to-end resilient routing in communication networks. The work highlights the main causes of failures of network nodes and links, and presents an overview of resilient routing mechanisms, covering issues related to the Future Internet (FI), wireless mesh networks (WMNs), and vehicular ad-hoc networks (VANETs). Features: discusses FI architecture for network virtualization; introduces proposals for dedicated and shared protection in random failure scenarios and against malicious activities; describes measures for WMN survivability that allow for evaluation of performance under multiple failures; proposes a new scheme to enable proactive updates of WMN antenna alignment; includes a detailed analysis of the differentiated reliability requirements for VANET applications, with a focus on issues of multi‐hop data delivery; reviews techniques for improving the stability of end-to-end VANET communication paths based on multipath routing and anycast forwarding.
DepCoS – RELCOMEX is an annual series of conferences organized by Wrocław University of Technology to promote a comprehensive approach to evaluation of system performability which is now commonly called dependability. In contrast to classic analyses which were concentrated on reliability of technical resources and structures built from them, dependability is based on multi-disciplinary approach to theory, technology and maintenance of a system considered to be a multifaceted amalgamation of technical, information, organization, software and human (users, administrators, supervisors, etc.) resources. Diversity of processes being realized (data processing, system management, system monitoring, etc.), their concurrency and their reliance on in-system intelligence often severely impedes construction of strict mathematical models and calls for application of intelligent and soft computing methods. This book presents the proceedings of the Ninth International Conference on Dependability and Complex Systems DepCoS-RELCOMEX, which took place in Brunów Palace, Poland, from 30th June to 4th July, 2014. The articles selected for this volume illustrate the variety of topics that must be included in system dependability analysis: tools, methodologies and standards for modelling, design and simulation of the systems, security and confidentiality in information processing, specific issues of heterogeneous, today often wireless, computer networks or management of transportation networks.
Network routing can be broadly categorized into Internet routing, PSTN routing, and telecommunication transport network routing. This book systematically considers these routing paradigms, as well as their interoperability. The authors discuss how algorithms, protocols, analysis, and operational deployment impact these approaches. A unique feature of the book is consideration of both macro-state and micro-state in routing; that is, how routing is accomplished at the level of networks and how routers or switches are designed to enable efficient routing. In reading this book, one will learn about 1) the evolution of network routing, 2) the role of IP and E.164 addressing in routing, 3) the impact on router and switching architectures and their design, 4) deployment of network routing protocols, 5) the role of traffic engineering in routing, and 6) lessons learned from implementation and operational experience. This book explores the strengths and weaknesses that should be considered during deployment of future routing schemes as well as actual implementation of these schemes. It allows the reader to understand how different routing strategies work and are employed and the connection between them. This is accomplished in part by the authors' use of numerous real-world examples to bring the material alive. Bridges the gap between theory and practice in network routing, including the fine points of implementation and operational experience Routing in a multitude of technologies discussed in practical detail, including, IP/MPLS, PSTN, and optical networking Routing protocols such as OSPF, IS-IS, BGP presented in detail A detailed coverage of various router and switch architectures A comprehensive discussion about algorithms on IP-lookup and packet classification Accessible to a wide audience due to its vendor-neutral approach
Network Routing: Algorithms, Protocols, and Architectures, Second Edition, explores network routing and how it can be broadly categorized into Internet routing, circuit-switched routing, and telecommunication transport network routing. The book systematically considers these routing paradigms, as well as their interoperability, discussing how algorithms, protocols, analysis, and operational deployment impact these approaches and addressing both macro-state and micro-state in routing. Readers will learn about the evolution of network routing, the role of IP and E.164 addressing and traffic engineering in routing, the impact on router and switching architectures and their design, deployment of network routing protocols, and lessons learned from implementation and operational experience. Numerous real-world examples bring the material alive. - Extensive coverage of routing in the Internet, from protocols (such as OSPF, BGP), to traffic engineering, to security issues - A detailed coverage of various router and switch architectures, IP lookup and packet classification methods - A comprehensive treatment of circuit-switched routing and optical network routing - New topics such as software-defined networks, data center networks, multicast routing - Bridges the gap between theory and practice in routing, including the fine points of implementation and operational experience - Accessible to a wide audience due to its vendor-neutral approach
This book covers the issues of monitoring, failure localization, and restoration in the Internet optical backbone, and focuses on the progress of state-of-the-art in both industry standard and academic research. The authors summarize, categorize, and analyze the developed technology in the context of Internet fault management and failure recovery under the Generalized Multi-Protocol Label Switching (GMPLS), via both aspects of network operations and theories.
MODELING and OPTIMIZATION of OPTICAL COMMUNICATION NETWORKS Optical networks are an integral part of many of the technologies that we use every day. It is a constantly changing and evolving area, with new materials, processes, and applications coming online almost daily. This book provides a basis for discussing open principles, methods and research problems in the modeling of optical communication networks. It also provides a systematic overview of the state-of-the-art research efforts and potential research directions dealing with optical communication metworks. It also simultaneously focuses on extending the limits of currently used systems encompassing optical and wireless domains and explores novel research on wireless and optical techniques and systems, describing practical implementation activities, results and issues. A handbook on applications for both academia and industry, this exciting new volume includes detailed discussions on real-world case studies on trends and emerging technologies associated with modeling of optical communication networks. This book also describes several numerical models and algorithms for simulation and optimization of optical communication networks. Modeling and optimization presents several opportunities for automating operations and introducing intelligent decision making in network planning and in dynamic control and management of network resources, including issues like connection establishment, self-configuration, and self-optimization, through prediction and estimation by utilizing present network state and historical data. It focuses on extending the limits of currently used systems encompassing optical and wireless domains, and explores the latest developments in applications like photonics, high speed communication systems and networks, visible light communication, nano-photonics, wireless, and MIMO systems.
This book covers the design and optimization of computer networks applying a rigorous optimization methodology, applicable to any network technology. It is organized into two parts. In Part 1 the reader will learn how to model network problems appearing in computer networks as optimization programs, and use optimization theory to give insights on them. Four problem types are addressed systematically – traffic routing, capacity dimensioning, congestion control and topology design. Part 2 targets the design of algorithms that solve network problems like the ones modeled in Part 1. Two main approaches are addressed – gradient-like algorithms inspiring distributed network protocols that dynamically adapt to the network, or cross-layer schemes that coordinate the cooperation among protocols; and those focusing on the design of heuristic algorithms for long term static network design and planning problems. Following a hands-on approach, the reader will have access to a large set of examples in real-life technologies like IP, wireless and optical networks. Implementations of models and algorithms will be available in the open-source Net2Plan tool from which the user will be able to see how the lessons learned take real form in algorithms, and reuse or execute them to obtain numerical solutions. An accompanying link to the author’s own Net2plan software enables readers to produce numerical solutions to a multitude of real-life problems in computer networks (www.net2plan.com).