Download Free Rf Cmos Oscillators For Modern Wireless Applications Book in PDF and EPUB Free Download. You can read online Rf Cmos Oscillators For Modern Wireless Applications and write the review.

While mobile phones enjoy the largest production volume ever of any consumer electronics products, the demands they place on radio-frequency (RF) transceivers are particularly aggressive, especially on integration with digital processors, low area, low power consumption, while being robust against process-voltage-temperature variations. Since mobile terminals inherently operate on batteries, their power budget is severely constrained. To keep up with the ever increasing data-rate, an ever-decreasing power per bit is required to maintain the battery lifetime. The RF oscillator is the second most power-hungry block of a wireless radio (after power amplifiers). Consequently, any power reduction in an RF oscillator will greatly benefit the overall power efficiency of the cellular transceiver. Moreover, the RF oscillators' purity limits the transceiver performance. The oscillator's phase noise results in power leakage into adjacent channels in a transmit mode and reciprocal mixing in a receive mode. On the other hand, the multi-standard and multi-band transceivers that are now trending demand wide tuning range oscillators. However, broadening the oscillator’s tuning range is usually at the expense of die area (cost) or phase noise. The main goal of this book is to bring forth the exciting and innovative RF oscillator structures that demonstrate better phase noise performance, lower cost, and higher power efficiency than currently achievable. Technical topics discussed in RF CMOS Oscillators for Modern Wireless Applications include:  Design and analysis of low phase-noise class-F oscillators Analyze a technique to reduce 1/f noise up-conversion in the oscillators Design and analysis of low power/low voltage oscillators Wide tuning range oscillators Reliability study of RF oscillators in nanoscale CMOS
The main goal of this book is to bring forth the exciting and innovative RF oscillator structures that demonstrate better phase noise performance, lower cost, and higher power efficiency than currently achievable.
Delivering the best possible solution for phase noise and outputpower efficiency in oscillators This complete and thorough analysis of microwave oscillatorsinvestigates all aspects of design, with particular emphasis onoperating conditions, choice of resonators and transistors, phasenoise, and output power. It covers both bipolar transistors andFETs. Following the authors' guidance, readers learn how to designmicrowave oscillators and VCOs that can be tuned over a very widefrequency range, yet have good phase noise, are low cost, and aresmall in size. All the essential topics in oscillator design anddevelopment are covered, including: * Device and resonator technology * Study of noise sources * Analysis methods * Design, calculation, and optimization methodologies * Practical design of single and coupled oscillators While most of the current literature in the field concentrates onclassic design strategies based on measurements, simulation, andoptimization of output power and phase noise, this text offers aunique approach that focuses on the complete understanding of thedesign process. The material demonstrates important design rulesstarting with the selection of best oscillator topology, choice oftransistors, and complete phase noise analysis that leads tooptimum performance of all relevant oscillator features. Alsoincluded are CMOS oscillators, which recently have become importantin cellular applications. For readers interested in specializedapplications and topics, a full chapter provides all the necessaryreferences. The contents of the text fall into two major categories: * Chapters 1 through 9 deal with a very detailed and expandedsingle resonator oscillator, including a thorough treatment of bothnonlinear analysis and phase noise * Chapters 10 and 11 use the knowledge obtained and apply it tomultiple coupled oscillators (synchronized oscillators) This text is partially based on research sponsored by the DefenseAdvanced Research Projects Agency (DARPA) and the United StatesArmy and conducted by Synergy Microwave Corporation. With thewealth of information provided for the analysis and practicaldesign of single and synchronized low-noise microwave oscillators,it is recommended reading for all RF microwave engineers. Inaddition, the text's comprehensive, step-by-step approach makes itan excellent graduate-level textbook.
A practical approach to RF circuit design, this volume covers nonlinear circuits and modelling, RF transistor amplifiers, oscillators and mixers.
This is a rigorous tutorial on radio frequency and microwave power amplifier design, teaching the circuit design techniques that form the microelectronic backbones of modern wireless communications systems. Suitable for self-study, corporate training, or Senior/Graduate classroom use, the book combines analytical calculations and computer-aided design techniques to arm electronic engineers with every possible method to improve their designs and shorten their design time cycles.
"This book provides perspectives on radio-frequency circuit and systems design, covering recent topics and developments in the RF area, exploring topics such as LNA linearization, behavioral modeling and co-simulation of analog and mixed-signal complex blocks for RF applications, integrated passive devices for RF-ICs and baseband design techniques and wireless standards"--
Advanced concepts for wireless technologies present a vision of technology that is embedded in our surroundings and practically invisible. From established radio techniques like GSM, 802.11 or Bluetooth to more emerging technologies, such as Ultra Wide Band and smart dust motes, a common denominator for future progress is the underlying integrated circuit technology. Wireless Technologies responds to the explosive growth of standard cellular radios and radically different wireless applications by presenting new architectural and circuit solutions engineers can use to solve modern design problems. This reference addresses state-of-the art CMOS design in the context of emerging wireless applications, including 3G/4G cellular telephony, wireless sensor networks, and wireless medical application. Written by top international experts specializing in both the IC industry and academia, this carefully edited work uncovers new design opportunities in body area networks, medical implants, satellite communications, automobile radar detection, and wearable electronics. The book is divided into three sections: wireless system perspectives, chip architecture and implementation issues, and devices and technologies used to fabricate wireless integrated circuits. Contributors address key issues in the development of future silicon-based systems, such as scale of integration, ultra-low power dissipation, and the integration of heterogeneous circuit design style and processes onto one substrate. Wireless sensor network systems are now being applied in critical applications in commerce, healthcare, and security. This reference, which contains 25 practical and scientifically rigorous articles, provides the knowledge communications engineers need to design innovative methodologies at the circuit and system level.
By 1990 the wireless revolution had begun. In late 2000, Mike Golio gave the world a significant tool to use in this revolution: The RF and Microwave Handbook. Since then, wireless technology spread across the globe with unprecedented speed, fueled by 3G and 4G mobile technology and the proliferation of wireless LANs. Updated to reflect this tremendous growth, the second edition of this widely embraced, bestselling handbook divides its coverage conveniently into a set of three books, each focused on a particular aspect of the technology. Six new chapters cover WiMAX, broadband cable, bit error ratio (BER) testing, high-power PAs (power amplifiers), heterojunction bipolar transistors (HBTs), as well as an overview of microwave engineering. Over 100 contributors, with diverse backgrounds in academic, industrial, government, manufacturing, design, and research reflect the breadth and depth of the field. This eclectic mix of contributors ensures that the coverage balances fundamental technical issues with the important business and marketing constraints that define commercial RF and microwave engineering. Focused chapters filled with formulas, charts, graphs, diagrams, and tables make the information easy to locate and apply to practical cases. The new format, three tightly focused volumes, provides not only increased information but also ease of use. You can find the information you need quickly, without wading through material you don’t immediately need, giving you access to the caliber of data you have come to expect in a much more user-friendly format.
This modern, pedagogic textbook from leading author Behzad Razavi provides a comprehensive and rigorous introduction to CMOS PLL design, featuring intuitive presentation of theoretical concepts, extensive circuit simulations, over 200 worked examples, and 250 end-of-chapter problems. The perfect text for senior undergraduate and graduate students.
This book demonstrates how to design a wideband receiver operating in current mode, in which the noise and non-linearity are reduced, implemented in a low cost single chip, using standard CMOS technology. The authors present a solution to remove the transimpedance amplifier (TIA) block and connect directly the mixer’s output to a passive second-order continuous-time Σ∆ analog to digital converter (ADC), which operates in current-mode. These techniques enable the reduction of area, power consumption, and cost in modern CMOS receivers.