Download Free Renewable Energy In District Heating And Cooling Book in PDF and EPUB Free Download. You can read online Renewable Energy In District Heating And Cooling and write the review.

This book evaluates the potential of the combined use of district heating networks and cogeneration in the European Union (EU). It also proposes measures to remove barriers hindering their widespread implementation, formulates policies for their implementation, and evaluates their economic, energy, and environmental consequences. The book presents a preliminary assessment of the likely cost and the impact of widespread adoption of district heating networks and cogeneration carried out in three cities that represent the variety of climatic conditions in the EU. Based on this assessment, it is estimated that by undertaking the maximum economically feasible implementation across the EU, fuel savings of €95M/year would be achieved, representing energy savings of 6,400 petajoules (PJ), which is around 15% of the total final energy consumption in the EU in 2013 (46,214.5 PJ). Using simple and quick calculations and not specific software, the method used allows the evaluation of the potential benefits of retrofitting existing power plants into cogeneration plants and connecting them to nearby heating networks. In light of increasing energy costs and environmental concerns, the book is of interest to heating engineers, city planners, and policy-makers around the globe.
Advances in Solar Heating and Cooling presents new information on the growing concerns about climate change, the security of energy supplies, and the ongoing interest in replacing fossil fuels with renewable energy sources. The amount of energy used for heating and cooling is very significant, estimated, for example, as half of final energy consumption in Europe. Solar thermal installations have the potential to meet a large proportion of the heating and cooling needs of both buildings and industry and the number of solar thermal installations is increasing rapidly. This book provides an authoritative review of the latest research in solar heating and cooling technologies and applications. - Provides researchers in academia and industry with an authoritative overview of heating and cooling for buildings and industry in one convenient volume - Part III, 'Solar cooling technologies' is contributed by authors from Shanghai Jiao Tong University, which is a world-leader in this area - Covers advanced applications from zero-energy buildings, through industrial process heat to district heating and cooling
This report identifies modern district energy as the most effective approach for many cities to transition to sustainable heating and cooling, by improving energy efficiency and enabling higher shares of renewables. This publication is one of the first reports to provide concrete policy, finance and technology best-practice recommendations on addressing the heating and cooling sectors in cities through energy efficiency improvements and the integration of renewables, both of which are central to the energy transition. These recommendations have been developed in collaboration with 45 champion cities, all of which use district energy, with 11 of them using it to achieve 100 per cent renewables or carbon-neutral targets.
Renewable Heating and Cooling: Technologies and Applications presents the latest information on the generation of heat for industry and domestic purposes, an area where a significant proportion of total energy is consumed. In Europe, this figure is estimated to be almost 50%, with the majority of heat generated by the consumption of fossil fuels. As there is a pressing need to increase the uptake of renewable heating and cooling (RHC) to reduce greenhouse gas emissions, this book provides a comprehensive and authoritative overview on the topic. Part One introduces key RHC technologies and discusses RHC in the context of global heating and cooling demand, featuring chapters on solar thermal process heat generation, deep geothermal energy, and solar cooling technologies. Part Two explores enabling technologies, special applications, and case studies with detailed coverage of thermal energy storage, hybrid systems, and renewable heating for RHC, along with case studies in China and Sweden. Users will find this book to be an essential resource for lead engineers and engineering consultants working on renewable heating and cooling in engineering companies, as well as academics and R&D professionals in private research institutes who have a particular interest in the subject matter. - Includes coverage on biomass, solar thermal, and geothermal renewable heating and cooling technologies - Features chapters on solar thermal process heat generation, deep geothermal energy, solar cooling technologies, and special applications - Presents case studies with detailed coverage of thermal energy storage, hybrid systems, and renewable heating for RHC - Explores enabling technologies and special applications
This book discusses heat transfer in underground energy systems. It covers a wide range of important and practical topics including the modeling and optimization of underground power cable systems, modeling of thermal energy storage systems utilizing waste heat from PV panels cooling. Modeling of PV pannels with cooling. While the performance of energy systems which utilize heat transfer in the ground is not yet fully understood, this book attempts to make sense of them. It provides mathematical modeling fundaments, as well as experimental investigation for underground energy systems. The book shows detailed examples, with solution procedures. The solutions are based on the Finite Element Method and the Finite Volume Method. The book allows the reader to perform a detailed design of various underground energy systems, as well as enables them to study the economic aspects and energy efficiency of underground energy systems. Therefore, this text is of interest to researchers, students, and lecturers alike.
Advanced District Heating and Cooling (DHC) Systems presents the latest information on the topic, providing valuable information on the distribution of centrally generated heat or cold energy to buildings, usually in the form of space heating, cooling, and hot water. As DHC systems are more efficient and less polluting than individual domestic or commercial heating and cooling systems, the book provides an introduction to DHC, including its potential contribution to reducing carbon dioxide emissions, then reviews thermal energy generation for DHC, including fossil fuel-based technologies, those based on renewables, and surplus heat valorization. Final sections address methods to improve the efficiency of DHC. - Gives a comprehensive overview of DHC systems and the technologies and energy resources utilized within these systems - Analyzes the various methods used for harnessing energy to apply to DHC systems - Ideal resource for those interested in district cooling, teleheating, heat networks, distributed heating, thermal energy, cogeneration, combined heat and power, and CHP - Reviews the application of DHC systems in the field, including both the business model side and the planning needed to implement these systems
Thermal energy storage (TES) technologies store thermal energy (both heat and cold) for later use as required, rather than at the time of production. They are therefore important counterparts to various intermittent renewable energy generation methods and also provide a way of valorising waste process heat and reducing the energy demand of buildings. This book provides an authoritative overview of this key area. Part one reviews sensible heat storage technologies. Part two covers latent and thermochemical heat storage respectively. The final section addresses applications in heating and energy systems. - Reviews sensible heat storage technologies, including the use of water, molten salts, concrete and boreholes - Describes latent heat storage systems and thermochemical heat storage - Includes information on the monitoring and control of thermal energy storage systems, and considers their applications in residential buildings, power plants and industry
Textbook on the science and methods behind a global transition to 100% clean, renewable energy for science, engineering, and social science students.
This book focuses on spatial planning – an important determinant of energy saving and renewable energy supply. Revealing the key driving forces for spatial development supporting the shift towards energy efficiency and renewable energy supplies, it shows the importance of integrated spatial and energy planning approaches for a timely and sustainable change of energy systems, thus supporting policies of climate protection. As operating within the context of renewable energy sources is becoming a major policy issue at the international, European and national level, spatial dimensions of renewable energy systems as well as challenges, barriers and opportunities in different spatial contexts become more important. This book analyses not only the fundamental system interrelations between resources, technologies and consumption patterns with respect to energy, but also the links to the spatial context, and provides guidelines for researchers as well as practitioners in this new, emerging field. It presents innovative analytical tools to solve real-world problems and discusses the most important fields of action in integrated spatial and energy planning including planning contents, planning visions and principles as well as planning process design and planning methodology.
Winner of Choice Magazine - Outstanding Academic Titles for 2007 Buildings account for over one third of global energy use and associated greenhouse gas emissions worldwide. Reducing energy use by buildings is therefore an essential part of any strategy to reduce greenhouse gas emissions, and thereby lessen the likelihood of potentially catastrophic climate change. Bringing together a wealth of hard-to-obtain information on energy use and energy efficiency in buildings at a level which can be easily digested and applied, Danny Harvey offers a comprehensive, objective and critical sourcebook on low-energy buildings. Topics covered include: thermal envelopes, heating, cooling, heat pumps, HVAC systems, hot water, lighting, solar energy, appliances and office equipment, embodied energy, buildings as systems and community-integrated energy systems (cogeneration, district heating, and district cooling). The book includes exemplary buildings and techniques from North America, Europe and Asia, and combines a broad, holistic perspective with technical detail in an accessible and insightful manner.