Download Free Recommendations For The Design Of Flat Slabs In Post Tension Concrete Using Unbonded And Bonded Tendons Book in PDF and EPUB Free Download. You can read online Recommendations For The Design Of Flat Slabs In Post Tension Concrete Using Unbonded And Bonded Tendons and write the review.

These recommendations present a guide to the design of two-way spanning, post-tensioned concrete flat slabs using unbonded or bonded tendons. Recommendations purely related to the use of unbonded tendons are clearly marked. These recommendations are intended only for the design of post-tensioned flat slabs in buildings and do not include the use in bridges. Post-tensioned concrete construction can be defined as unbonded or bonded, depending on whether the tendon ducts are filled with a cement grout (in order to provide a bonded structure) or whether the tendons are suitably coated and wrapped or greased and plastic covered (unbonded). While in a number of countries, (e.g., United States and Canada) economic and construction considerations have resulted in the selection of unbonded tendons, in other countries the use of the traditional bonded tendons is favoured, (e.g., Australia). Some of the advantages claimed for the use of unbonded tendons can be summarized as follows: Extremely low friction values, tendons are fully protected against corrosion during construction, maximum possible tendon drape due to the small diameter of the tendon; this is of major importance in slender structures such as flat plates, simple and fast placement of the tendons, avoidance of grouting operations. When tendons are grouted after stressing the claimed advantages are particularly that the bond between the concrete structure and the tendons increases the ultimate strength and less reliance is placed on the long-term adequacy of the anchorage.
This manual contains updated information on the current practices in the use, design, and construction of post- tensioning. The 6th Edition has been extensively rewritten and expanded from the 5th Edition. The Manual contains 12 new chapters that give design guidance on modern applications of post-tensioning. All of the original chapters have been totally revised and modified to reflect the current industry practices. New topics include Seismic Design, Post-Tensioned Concrete Floors, Parking Structures, Slab-on-Ground, Bridges, Stay Cables, Storage Structures, Barrier Cables, Dynamic and Fatigue, Durability, Inspection and Maintenance, and Field and Plant Certification. The Manual provides the industry standard for design and construction of post-tensioned structures. This book is an invaluable resource for practicing engineers, architects, students, educators, contractors, inspectors, and building officials. The 6th Edition of the Post-Tensioning Manual provides basic information and the essential principles of post-tensioning.
The quality and testing of materials used in construction are covered by reference to the appropriate ASTM standard specifications. Welding of reinforcement is covered by reference to the appropriate AWS standard. Uses of the Code include adoption by reference in general building codes, and earlier editions have been widely used in this manner. The Code is written in a format that allows such reference without change to its language. Therefore, background details or suggestions for carrying out the requirements or intent of the Code portion cannot be included. The Commentary is provided for this purpose. Some of the considerations of the committee in developing the Code portion are discussed within the Commentary, with emphasis given to the explanation of new or revised provisions. Much of the research data referenced in preparing the Code is cited for the user desiring to study individual questions in greater detail. Other documents that provide suggestions for carrying out the requirements of the Code are also cited.
Unter "bewehrtem Beton" versteht man eine Kombination von Beton mit anderen, verstärkenden Materialien (meist Stahl). Aus Stahlbetonplatten werden nicht nur Häuser gebaut, sondern auch Straßen und Mauern. Bauingenieure müssen die Merkmale und Einsatzfelder dieser Werkstoffe kennen und Belastungsgrenzen abschätzen. Dieses Buch, das einzige seiner Art, dient Praktikern und Studenten der Bautechnik als kompetenter Begleiter. (01/00)