Download Free Qc T 80 2022 Translated English Of Chinese Standard Qc T 80 2022 Qct80 2022 Book in PDF and EPUB Free Download. You can read online Qc T 80 2022 Translated English Of Chinese Standard Qc T 80 2022 Qct80 2022 and write the review.

This document specifies the terms and definitions, materials and structures, technical requirements, test methods, inspection rules, marks, packaging, transportation and storage requirements for polyamide tubing and tubing assemblies used for air braking systems. This document is applicable to the air braking pipeline system, of which the maximum working pressure is 1.25MPa and below, and the working temperature is -40¡ãC~100¡ãC. This document does not apply to the polyamide spiral tube assembly for the air braking system between the tractor and the trailer.
This standard specifies the dimensional specification, performance requirements, test methods, inspection rules, packaging, marking, transportation, storage and etc. of Polyamide (PA) tubing and tube assemblies for air braking systems.
This document specifies the type, size, technical conditions of B-type clips for automobiles. This document is applicable to B-type clips, which have a diameter of 6 mm in the mounting hole of the body sheet, AND a connection thickness b = 2 mm ~ 10 mm.
This document specifies the type, size, technical conditions of double end studs bm = 2d. This document is applicable to double end studs for automobiles, whose thread at the screw-in base end is transition fit thread AND the thread at the screw-in nut end is ordinary fine thread.
This document specifies the type, size, technical conditions of double end studs bm = 1.25d. This document is applicable to double end studs for automobiles, whose thread at the screw-in base end is ordinary coarse thread, transition fit thread, ordinary fine thread (thread specification is greater than M16), AND the thread at the screw-in nut end is ordinary coarse thread and ordinary fine thread.
This document specifies the terms and definitions, performance requirements, bench test methods of electric air compressors for automobiles. This document is applicable to electric air compressors, which are used in commercial vehicle pneumatic brake systems. Other electric air compressors for vehicles may make reference to this standard.
This document specifies the installation dimensions of the interface -- between the front end of the transmission assembly and the engine or drive motor, AND the interface -- between the rear end and the transmission components. This document applies to automotive mechanical transmission assemblies.
This document specifies the main types and dimensions for tapped and male fitting in the matrix of pneumatic braking system of motor vehicle and towed vehicle. This document applies to the pneumatic braking system of motor vehicles and towed vehicles with air pressure below 2 MPa.
This document specifies the type, size, and technical conditions of C-type clips for automobiles. This document is applicable to C-type clips, which have a diameter of D = 6 mm, D = 9 mm, D1 = ¦µ10 in the mounting hole of the body sheet or base hole of D1 = M10, D1 = 7/16'', AND a connection thickness S = 5.5 mm ~ 35.0 mm or S1 = 5.5 mm ~ 32.0 mm.
This document stipulates the classification, basic configuration, general requirements, test methods, inspection rules and marking, packaging, transportation, storage of coach toilets. This document applies to toilets used on coaches.