Download Free Qc T 603 2022 Translated English Of Chinese Standard Qc T 603 2022 Qct603 2022 Book in PDF and EPUB Free Download. You can read online Qc T 603 2022 Translated English Of Chinese Standard Qc T 603 2022 Qct603 2022 and write the review.

This document specifies the type, size, and technical conditions of A-type clips for automobiles. This document is applicable to A-type clips, which have a diameter of D0 = 5 mm and D0 = 6 mm in the mounting hole of the body sheet, AND a maximum connection thickness S of 5 mm.
This document specifies the type, size, technical conditions of B-type clips for automobiles. This document is applicable to B-type clips, which have a diameter of 6 mm in the mounting hole of the body sheet, AND a connection thickness b = 2 mm ~ 10 mm.
This document specifies the type, size, and technical conditions of C-type clips for automobiles. This document is applicable to C-type clips, which have a diameter of D = 6 mm, D = 9 mm, D1 = ¦µ10 in the mounting hole of the body sheet or base hole of D1 = M10, D1 = 7/16'', AND a connection thickness S = 5.5 mm ~ 35.0 mm or S1 = 5.5 mm ~ 32.0 mm.
This document specifies the main types and dimensions for tapped and male fitting in the matrix of pneumatic braking system of motor vehicle and towed vehicle. This document applies to the pneumatic braking system of motor vehicles and towed vehicles with air pressure below 2 MPa.
This document specifies the requirements, test methods, inspection rules and signs, packaging, transportation, storage of the seats of passenger vehicles. This document is applicable to passenger seats of categories M2 and M3 passenger vehicles. This document does not apply to the plastic seats, which are used in Class A and Class I passenger vehicles of category M2 and M3, as well as student seats of special school buses.
This document specifies the type, size, technical conditions of double end studs bm = 1.25d. This document is applicable to double end studs for automobiles, whose thread at the screw-in base end is ordinary coarse thread, transition fit thread, ordinary fine thread (thread specification is greater than M16), AND the thread at the screw-in nut end is ordinary coarse thread and ordinary fine thread.
This document specifies the terms and definitions, classification and marking, requirements, test methods, inspection rules, packaging, marking, transportation, storage, etc. of performance films for automotive glass. This document is applicable to the performance film, which is mounted on the inner surface of the motor vehicle window glass and the surface of the interior partition glass. The performance film mounted on the glass surface of other vehicles can use this standard as a reference.
This document specifies the terms and definitions, performance requirements, bench test methods of electric air compressors for automobiles. This document is applicable to electric air compressors, which are used in commercial vehicle pneumatic brake systems. Other electric air compressors for vehicles may make reference to this standard.
This document stipulates the classification, basic configuration, general requirements, test methods, inspection rules and marking, packaging, transportation, storage of coach toilets. This document applies to toilets used on coaches.
This document specifies the type, size, technical conditions of double end studs bm = 2d. This document is applicable to double end studs for automobiles, whose thread at the screw-in base end is transition fit thread AND the thread at the screw-in nut end is ordinary fine thread.