Download Free Punching Shear Of Structural Concrete Slabs Book in PDF and EPUB Free Download. You can read online Punching Shear Of Structural Concrete Slabs and write the review.

fib Bulletin 81 reports the latest information available to researchers and practitioners on the analysis, design and experimental evidence of punching shear of structural concrete slabs. It follows previous efforts by the International Federation for Structural Concrete (fib) and its predecessor the Euro-International Committee for Concrete (CEB), through CEB Bulletin 168, Punching Shear in Reinforced Concrete (1985) and fibBulletin 12, Punching of structural concrete slabs (2001), and an international symposium sponsored by the punching shear subcommittee of ACI Committee 445 (Shear and Torsion) and held in Kansas City, Mo., USA, in 2005. This bulletin contains 18 papers that were presented in three sessions as part of an international symposium held in Philadelphia, Pa., USA, on October 25, 2016. The symposium was co-organized by the punching shear sub-committee of ACI 445 and by fib Working Party 2.2.3 (Punching and Shear in Slabs) with the objectives of not only disseminating information on this important design subject but also promoting harmonization among the various design theories and treatment of key aspects of punching shear design. The papers are organized in the same order they were presented in the symposium. The symposium honored Professor Emeritus Neil M. Hawkins (University of Illinois at Urbana-Champaign, USA), whose contributions through the years in the field of punching shear of structural concrete slabs have been paramount. The papers cover key aspects related to punching shear of structural concrete slabs under different loading conditions, the study of size effect on punching capacity of slabs, the effect of slab reinforcement ratio on the response and failure mode of slabs, without and with shear reinforcement, and its implications for the design and formulation in codes of practice, an examination of different analytical tools to predict the punching shear response of slabs, the study of the post-punching response of concrete slabs, the evaluation of design provisions in modern codes based on recent experimental evidence and new punching shear theories, and an overview of the combined efforts undertaken jointly by ACI 445 and fib WP 2.2.3 to generate test result databanks for the evaluation and calibration of punching shear design recommendations in North American and international codes of practice.
This volume highlights the latest advances, innovations, and applications in the field of fibre-reinforced concrete (FRC), as presented by scientists and engineers at the RILEM-fib X International Symposium on Fibre Reinforced Concrete (BEFIB), held in Valencia, Spain, on September 20-22, 2021. It discusses a diverse range of topics concerning FRC: technological aspects, nanotechnologies related with FRC, mechanical properties, long-term properties, analytical and numerical models, structural design, codes and standards, quality control, case studies, Textile-Reinforced Concrete, Geopolymers and UHPFRC. After the symposium postponement in 2020, this new volume concludes the publication of the research works and knowledge of FRC in the frame of BEFIB from 2020 to 2021 with the successful celebration of the hybrid symposium BEFIB 2021. The contributions present traditional and new ideas that will open novel research directions and foster multidisciplinary collaboration between different specialists.
Punching is considered to be one of the most difficult problems in structural concrete design and mechanical models or theoretical analyses were developed rather late in the history of concrete research attempts. This fib Bulletin reviews the development of design models and theoretical analyses since the CEB Bulletin 168 Punching Shear in Reinforced Concrete - State-of-the-Art Report published in 1985. The role of the concrete tensile strength was specially addressed. In this respect the present bulletin is also following-up the CEB Bulletin 237 Concrete Tension and Size Effects - Utilisation of concrete tension in structural concrete design and relevance of size effect - Contributions from CEB Task Group 2.7 published in 1997. Apart from new theoretical developments a comprehensive databank for comparisons with experimental evidence is included. About 400 punching tests were critically reviewed and evaluated in a consistent manner. This is thought to be the first step towards a generally agreed selection of reliable tests. The evident value of such a data bank is illustrated by comparisons carried out between the data and some of the analytical proposals as well as empirical code formulas. List of contents : (1) Introduction, (2) Code equations, (3) Mechanical models for punching, (4) New developments for mechanical models, (5) Numerical investigations, (7) Comparison of mechanical models and test results of slabs without shear reinforcement, (8) Comparison of code rules and tests of flat slabs without shear reinforcement, (9) Comparison of codes, models and tests of flat slabs with shear reinforcement, (10) Experimental investigations, (11) Summary and conclusions, References, Appendices : (I) Databank on slabs without shear reinforcement, (II) Databank on slabs with shear reinforcement, (III) Comparison of test data with code rules, (IV) Comparison of test data with selected models, (V) Notations.
The International Federation for Structural Concrete (fib) is a pre-normative organization. 'Pre-normative' implies pioneering work in codification. This work has now been realized with the fib Model Code 2010. The objectives of the fib Model Code 2010 are to serve as a basis for future codes for concrete structures, and present new developments with regard to concrete structures, structural materials and new ideas in order to achieve optimum behaviour. The fib Model Code 2010 is now the most comprehensive code on concrete structures, including their complete life cycle: conceptual design, dimensioning, construction, conservation and dismantlement. It is expected to become an important document for both national and international code committees, practitioners and researchers. The fib Model Code 2010 was produced during the last ten years through an exceptional effort by Joost Walraven (Convener; Delft University of Technology, The Netherlands), Agnieszka Bigaj-van Vliet (Technical Secretary; TNO Built Environment and Geosciences, The Netherlands) as well as experts out of 44 countries from five continents.
Reflects developments in the field of blast engineering since the early 1990s. Combining coverage of the design standards, codes and materials with an appreciation of the needs and demands of the designer, this book provides the engineer with a comprehensive source of reference for the main elements of blast engineering design in modern practice.
This book gathers the proceedings of the International Conference on Advanced Technologies for Humanity (ICATH’2021), held on November 26-27, 2021, in INSEA, Rabat, Morocco. ICATH’2021 was jointly co-organized by the National Institute of Statistics and Applied Economics (INSEA) in collaboration with the Moroccan School of Engineering Sciences (EMSI), the Hassan II Institute of Agronomy and Veterinary Medicine (IAV-Hassan II), the National Institute of Posts and Telecommunications (INPT), the National School of Mineral Industry (ENSMR), the Faculty of Sciences of Rabat (UM5-FSR), the National School of Applied Sciences of Kenitra (ENSAK) and the Future University in Egypt (FUE). ICATH’2021 was devoted to practical models and industrial applications related to advanced technologies for Humanity. It was considered as a meeting point for researchers and practitioners to enable the implementation of advanced information technologies into various industries. This book is helpful for PhD students as well as researchers. The 48 full papers were carefully reviewed and selected from 105 submissions. The papers presented in the volume are organized in topical sections on synergies between (i) smart and sustainable cities, (ii) communication systems, signal and image processing for humanity, (iii) cybersecurity, database and language processing for human applications, (iV) renewable and sustainable energies, (V) civil engineering and structures for sustainable constructions, (Vi) materials and smart buildings and (Vii) Industry 4.0 for smart factories. All contributions were subject to a double-blind review. The review process was highly competitive. We had to review 105 submissions from 12 countries. A team of over 100 program committee members and reviewers did this terrific job. Our special thanks go to all of them.
Dealing with a wide range of non-metallic materials, this book opens up possibilities of lighter, more durable structures. With contributions from leading international researchers and design engineers, it provides a complete overview of current knowledge on the subject.
Unter "bewehrtem Beton" versteht man eine Kombination von Beton mit anderen, verstärkenden Materialien (meist Stahl). Aus Stahlbetonplatten werden nicht nur Häuser gebaut, sondern auch Straßen und Mauern. Bauingenieure müssen die Merkmale und Einsatzfelder dieser Werkstoffe kennen und Belastungsgrenzen abschätzen. Dieses Buch, das einzige seiner Art, dient Praktikern und Studenten der Bautechnik als kompetenter Begleiter. (01/00)