Download Free Proceeding Of 5th International Conference On Advances In Manufacturing And Materials Engineering Book in PDF and EPUB Free Download. You can read online Proceeding Of 5th International Conference On Advances In Manufacturing And Materials Engineering and write the review.

This book presents the proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), August 9–10, Kuala Lumpur, Malaysia. It presents articles in topics that outline the state-of-the-art information in manufacturing and materials engineering for academia and industries. The topics represent the strong synergy between manufacturing, materials, design, and management supporting the transition from product service systems to life cycle engineering services as a contributor to high value manufacturing. The scope of this book also presents a set of new additive manufacturing, 3D printing, and advanced materials with new technology; green technology for United Nations SDGs; modeling & simulation of materials and manufacturing with some classical case examples. It caters to academics and industrial practitioners who have research interest in the latest advances in manufacturing and materials engineering.
This book reports on cutting-edge research and technologies in the field of advanced manufacturing and materials, with a special emphasis on unconventional machining process, rapid prototyping and biomaterials. It gathers contributions to the International Conference on Manufacturing Engineering and Materials (ICMEM 2020), which was originally planned in June 2020, but will actually take place in 2021, in Nový Smokovec, Slovakia, because of the Covid-19 pandemic. Despite the challenging times, submitted contributions were peer-reviewed, and upon a careful revision, included in this book, which covers advances that are expected to increase the industry’s competitiveness with regard to sustainable development and preservation of the environment and natural resources. Condition monitoring, industrial automation, and diverse fabrication processes such as welding, casting and molding, as well as tribology and bioengineering, are just a few of the topics discussed in the book’s wealth of authoritative contributions. A special emphasis is given to problems connected to climate change and solution manufacturer and engineers may adopt and develop to prevent and cope with them.
Smart manufacturing is a broad category of manufacturing that employs computer-integration, high levels of adaptability and rapid design changes, together with digital information technology and a technically-trained workforce. This book presents the proceedings of SMMP2022, the 2022 International Conference on Smart Manufacturing and Material Processing, held on 12 and 13 August 2022 as a virtual event due to continuing restrictions related to the COVID-19 pandemic, and hosted from Shanghai, China. The conference provides a platform for researchers and scientists from smart manufacturing and material sciences to come together with researchers from various other application areas to discuss problems and solutions, identify new issues, and shape future directions for research. The conference received 60 submissions. These were submitted to a rigorous peer review process by a committee of experts from various disciplines, after which, 23 were accepted for presentation at the conference and publication here. The topics covered include materials processing and product manufacture, sensors and smart material systems, functional materials, industrial automation and process control, and discussion of the state-of-the-art and future direction of smart manufacturing and material sciences. Providing an overview of current developments in smart manufacturing and material processing, the book will be of interest to all those working in the field.
This book contains chapters with the results of the research into the creep effect in different materials (ceramics, metallic materials, polymers, organic materials) and presents the method for using the assessment based on creep tests and numerical calculations to determine the actual lifetime. This subject has relevance as a significant development of new materials in which the creep effect is a decisive factor for their durability within the design service life have been observed in recent years. Therefore, there is a great demand for knowledge of the actual performance of materials during and beyond the design service life. The book aims to provide readers, including but not limited to MSc and PhD students as well as research personnel and engineers involved in operation of power equipment, with the comprehensive information on changes in the performance of creep-resistant materials during service.
This book comprises select papers from the 10th International Conference on Manufacturing Engineering and Processes 2021. The contents of this volume focus on recent technological advances in the field of manufacturing engineering and processes including computer-aided design and manufacturing, environmentally sustainable manufacturing processes, composite materials manufacturing, and nanomaterials and nanomanufacturing. The contents cover latest advances especially in 3D printing and additive manufacturing techniques and processes for sustainable materials including ceramic and polymer-matrix composite where there is paucity of good papers in the literature. This book proves a valuable resource for those in academia and industry.
Conference proceedings covering the latest technology developments for fossil fuel power plants, including nickel-based alloys for advanced ultrasupercritical power plants, materials for turbines, oxidation and corrosion, welding and weld performance, new alloys concepts, and creep and general topics.
This edited book contains extended research papers from AIMTDR 2014. This includes recent research work in the fields of friction stir welding, sheet forming, joining and forming, modeling and simulation, efficient prediction strategies, micro-manufacturing, sustainable and green manufacturing issues etc. This will prove useful to students, researchers and practitioners in the field of materials forming and manufacturing.
This book reports on cutting-edge findings concerning characterization of material behavior, material modeling and simulation, and applications in the field of manufacturing. Based on the second International Conference on Advanced Materials Mechanics & Manufacturing, A3M2018, organized by the Laboratory of Mechanics, Modeling and Manufacturing (LA2MP) of the National School of Engineers of Sfax, Tunisia, the book covers a variety of topics, such as experimental analysis of material plasticity and fatigue, numerical simulation of material behavior, and optimization of manufacturing processes, such as cutting and injection, among others. It offers a timely snapshot on current research and applications, offering a bridge to facilitate communication and collaboration between academic and industrial researchers.
This book reports on topics at the interface between manufacturing and materials engineering, with a special emphasis on smart and sustainable manufacturing. It describes innovative research in design engineering and manufacturing technology, covering the development and characterization of advanced materials alike. It also discusses key aspects related to ICT in engineering education. Based on the 5th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2022), held on June 7-10, 2022, in Poznan, Poland, this first volume of a 2-volume set provides academics and professionals with extensive information on trends and technologies, and challenges and practice-oriented experience in all the above-mentioned areas.
This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 5th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in March 2019. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.