Download Free Planning Production And Preventive Maintenance In A Flexible Manufacturing System A Stochastic Control Approach Book in PDF and EPUB Free Download. You can read online Planning Production And Preventive Maintenance In A Flexible Manufacturing System A Stochastic Control Approach and write the review.

To be able to compete successfully both at national and international levels, production systems and equipment must perform at levels not even thinkable a decade ago. Requirements for increased product quality, reduced throughput time and enhanced operating effectiveness within a rapidly changing customer demand environment continue to demand a high maintenance performance. In some cases, maintenance is required to increase operational effectiveness and revenues and customer satisfaction while reducing capital, operating and support costs. This may be the largest challenge facing production enterprises these days. For this, maintenance strategy is required to be aligned with the production logistics and also to keep updated with the current best practices. Maintenance has become a multidisciplinary activity and one may come across situations in which maintenance is the responsibility of people whose training is not engineering. This handbook aims to assist at different levels of understanding whether the manager is an engineer, a production manager, an experienced maintenance practitioner or a beginner. Topics selected to be included in this handbook cover a wide range of issues in the area of maintenance management and engineering to cater for all those interested in maintenance whether practitioners or researchers. This handbook is divided into 6 parts and contains 26 chapters covering a wide range of topics related to maintenance management and engineering.
Decision & Control in Management Science analyzes emerging decision problems in the management and engineering sciences. It is divided into five parts. The first part explores methodological issues involved in the optimization of deterministic and stochastic dynamical systems. The second part describes approaches to the model energy and environmental systems and draws policy implications related to the mitigation of pollutants. The third part applies quantitative techniques to problems in finance and economics, such as hedging of options, inflation targeting, and equilibrium asset pricing. The fourth part considers a series of problems in production systems. Optimization methods are put forward to provide optimal policies in areas such as inventory management, transfer-line, flow-shop and other industrial problems. The last part covers game theory. Chapters range from theoretical issues to applications in politics and interactions in franchising systems. Decision & Control in Management Science is an excellent reference covering methodological issues and applications in operations research, optimal control, and dynamic games.
One of the most important methods in dealing with the optimization of large, complex systems is that of hierarchical decomposition. The idea is to reduce the overall complex problem into manageable approximate problems or subproblems, to solve these problems, and to construct a solution of the original problem from the solutions of these simpler prob lems. Development of such approaches for large complex systems has been identified as a particularly fruitful area by the Committee on the Next Decade in Operations Research (1988) [42] as well as by the Panel on Future Directions in Control Theory (1988) [65]. Most manufacturing firms are complex systems characterized by sev eral decision subsystems, such as finance, personnel, marketing, and op erations. They may have several plants and warehouses and a wide variety of machines and equipment devoted to producing a large number of different products. Moreover, they are subject to deterministic as well as stochastic discrete events, such as purchasing new equipment, hiring and layoff of personnel, and machine setups, failures, and repairs.
In this volume, leading experts in mathematical manufacturing research and related fields review and update recent advances of mathematics in stochastic manufacturing systems and attempt to bridge the gap between theory and applications. The topics covered include scheduling and production planning, modeling of manufacturing systems, hierarchical control for large and complex systems, Markov chains, queueing networks, numerical methods for system approximations, singular perturbed systems, risk-sensitive control, stochastic optimization methods, discrete event systems, and statistical quality control.
Production planning, inventory management, quality control, and maintenance policy are critical components of the manufacturing system. The effective integration of these four components gives a manufacturing operation the competitive edge in today's global market place. Integrated Models in Production Planning, Inventory, Quality, and Maintenance provides, in one volume, the latest developments in the integration of production, quality, and maintenance models. Prominent researchers, who are actively engaged in these areas, have contributed the topical chapters focused on the most recent issues in the area. In Part I, Ben-Daya and Rahim provide an overview of the literature dealing with integrated models for production, quality, and maintenance. Directions for future research are outlined. Part II contains six chapters (chapters 2 to 6) dealing with integrated models for production and maintenance. Part III deals with integrated production/inventory and quality models in chapters 7-11. Part IV focuses on quality and maintenance integrated models and contains two chapters. Part V deals with warranty, manufacturing, and quality and contains two chapters. Part VI addresses issues related to quality and contains three chapters (chapters 16-18).
Information Control Problems in Manufacturing 2006 contains the Proceedings of the 12th IFAC Symposium on Information Control Problems in Manufacturing (INCOM'2006). This symposium took place in Saint Etienne, France, on May 17-19 2006. INCOM is a tri-annual event of symposia series organized by IFAC and it is promoted by the IFAC Technical Committee on Manufacturing Plant Control. The purpose of the symposium INCOM'2006 was to offer a forum to present the state-of-the-art in international research and development work, with special emphasis on the applications of optimisation methods, automation and IT technologies in the control of manufacturing plants and the entire supply chain within the enterprise. The symposium stressed the scientific challenges and issues, covering the whole product and processes life cycle, from the design through the manufacturing and maintenance, to the distribution and service. INCOM'2006 Technical Program also included a special event on Innovative Engineering Techniques in Healthcare Delivery. The application of engineering and IT methods in medicine is a rapidly growing field with many opportunities for innovation. The Proceedings are composed of 3 volumes: Volume 1 - Information Systems, Control & Interoperability Volume 2 - Industrial Engineering Volume 3 - Operational Research * 3-volume set, containing 362 carefully reviewed and selected papers * presenting the state-of-the-art in international research and development in Information Control problems in Manufacturing
The subject for this book is my life work on the enterprise modeling and integration by a stochastic/queuing form, and the book plan was conceived before my stay in the USA in 1996–97 as a visiting scholar. The rst title was “Stochastic Management and Design of Manufacturing Systems.” The rst version was attempted in 2001; however, this version was inappropriate and was not revised till now. It is 40 years since I attempted a stochastic approach to manufacturing and management due to the limitations of statistical approaches. The century in which industrial engineering and management rose to the forefront was one in which a static/statistical approach was applied to the development of classical models and general/average theory. This book presents a stochastic management approach to the manufacturing and service enterprise with risks by a game/strategic view, and is based on many papers in production/queueing studies that have appeared in famous journals. The book’s objective is to discuss and show the goals and constraints on manufacturing and service enterprises, and to provide a strategic/collaborative solution for management with risks in heterogeneity. This book mainly focuses on the three manufacturing classes: continuous, poi- wise, and exible stream types under risks. These manufacturing streams are rst studied using the respective stochastic processes, and are characterized and dev- oped as a queueing/strategic control problem of look-ahead/buffer, selection/swit- over, and arrangement/routings. Moreover, the behaviors of some design/control variables are shown and useful theories for design are established.
"This book presents relevant theoretical frameworks and most recent research findings in this area, providing significant theories for research students and scholars to carry out their continuous research as well as practitioners who aim to improve upon their understanding of distributed production planning"--
In the last decade, the production of mechanical components to be assembled in final products produced in high volumes (e.g. cars, mopeds, industrial vehicles, etc.) has undergone deep changes due to the overall modifications in the way companies compete. Companies must consider competitive factors such as short lead times, tight product tolerances, frequent market changes and cost reduction. Anyway, companies often have to define production objectives as trade-offs among these critical factors since it can be difficult to improve all of them. Even if system flexibility is often considered a fundamental requirement for firms, it is not always a desirable characteristic of a system because it requires relevant investment cost which can jeopardize the profitability of the firm. Dedicated systems are not able to adapt to changes of the product characteristics while flexible systems offer more flexibility than what is needed, thus increasing investment and operative costs. Production contexts characterized by mid to high demand volume of well identified families of products in continuous evolution do not require the highest level of flexibility; therefore, manufacturing system flexibility must be rationalized and it is necessary to find out the best trade-off between productivity and flexibility by designing manufacturing systems endowed with the right level of flexibility required by the production problem. This new class of production systems can be named Focused Flexibility Manufacturing Systems-FFMSs. The flexibility degree in FFMSs is related to their ability to cope with volume, mix and technological changes, and it must take into account both present and future changes. The required level of system flexibility impacts on the architecture of the system and the explicit design of flexibility often leads to hybrid systems, i.e. automated integrated systems in which parts can be processed by both general purpose and dedicated machines. This is a key issue of FFMSs and results from the matching of flexibility and productivity that respectively characterize FMSs and Dedicated Manufacturing Systems (DMSs). The market share of the EU in the machine tool sector is 44%; the introduction of focused flexibility would be particularly important for machine tool builders whose competitive advantage is based on the ability of customizing their systems on the basis of needs of their customers. In fact, even if current production contexts frequently present situations which would fit well with the FFMS approach, tradition and know-how of machine tool builders play a crucial role. Firms often agree with the focused flexibility vision, nevertheless they decide not to pay the risk and efforts related to the design of this new system architecture. This is due also to the lack of well-structured design approaches which can help machine tool builders to configure innovative systems. Therefore, the FFMS topic is studied through the book chapters following a shared mission: "To define methodologies and tools to design production systems with a minimum level of flexibility needed to face, during their lifecycle, the product and process evolution both in the technological and demand aspects. The goal is to find out the optimal trade-off between flexibility and productivity". The book framework follows the architecture which has been developed to address the FFMS Design problem. This architecture is both broad and detailed, since it pays attention to all the relevant levels in a firm hierarchy which are involved in the system design. Moreover, the architecture is innovative because it models both the point of view of the machine tool builder and the point of view of the system user. The architecture starts analyzing Manufacturing Strategy issues and generating the possible demand scenario to be faced. Technological aspects play a key role while solving process plan problems for the products in the part family. Strategic and technological data becomes input when a machine tool builder performs system configuration. The resulting system configurations are possible solutions that a system user considers when planning its system capacity. All the steps of the architecture are deeply studied, developing methods and tools to address each subproblem. Particular attention is paid to the methodologies adopted to face the different subproblems: mathematical programming, stochastic programming, simulation techniques and inverse kinematics have been used. The whole architecture provides a general approach to implement the right degree of flexibility and it allows to study how different aspects and decisions taken in a firm impact on each other. The work presented in the book is innovative because it gives links among different research fields, such as Manufacturing Strategy, Process Plan, System Design, Capacity Planning and Performance Evaluation; moreover, it helps to formalize and rationalize a critical area such as manufacturing system flexibility. The addressed problem is relevant at an academic level but, also, at an industrial level. A great deal of industrial sectors need to address the problem of designing systems with the right degree of flexibility; for instance, automotive, white goods, electrical and electronic goods industries, etc. Attention to industrial issues is confirmed by empirical studies and real case analyses which are presented within the book chapters.