Download Free Pipefitting Level 1 Book in PDF and EPUB Free Download. You can read online Pipefitting Level 1 and write the review.

This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes: Orientation to the Trade, Pipefitting Hand Tools, Pipefitting Power Tools, Oxyfuel Cutting, Ladders and Scaffolds and Motorized Equipment. Instructor Supplements Downloadable instructor resources that include module tests, PowerPoints®, and performance profile sheets are available at www.nccer.org/irc.
This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes: Piping Systems, Drawings and Detail Sheets, Identifying and Installing Valves, Pipefitting Trade Math, Threaded Pipe Fabrication, Socket Weld Pipe Fabrication, Butt Weld Pipe Fabrication, Excavations and Underground Pipe Installation. Instructor Supplements Downloadable instructor resources that include module tests, PowerPoints®, and performance profi le sheets are available at www.nccer.org/irc.
This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes: Rigging Equipment, Rigging Practices, Standards and Specifications, Advanced Trade Math, Motorized Equipment Two, Introduction to Aboveground Pipe Installation, Field Routing and Vessel Trim, Pipe Hangers and Supports and Testing Piping Systems and Equipment. Instructor Supplements Downloadable instructor resources that include module tests, PowerPoints(R), and performance profi le sheets are available at www.nccer.org/irc.
This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes: Rigging Equipment, Rigging Practices, Standards and Specifications, Advanced Trade Math, Motorized Equipment II, Introduction to Aboveground Pipe Installation, Field Routing and Vessel Trim, Pipe Hangers and Supports, and Testing Piping Systems and Equipment. Instructor Supplements Instructors: Product supplements may be ordered directly through OASIS at http://oasis.pearson.com. For more information contact your Pearson NCCER/Contren Sales Specialist at http://nccer.pearsonconstructionbooks.com/store/sales.aspx. Annotated Instructor's Guide Paperback 0-13-227286-5 Computerized Testing Software 0-13-229132-0 Transparency Masters 0-13-229153-3 PowerPoint® Presentation Slides 0-13-608658-6
Piping and Pipeline Calculations Manual, Second Edition provides engineers and designers with a quick reference guide to calculations, codes, and standards applicable to piping systems. The book considers in one handy reference the multitude of pipes, flanges, supports, gaskets, bolts, valves, strainers, flexibles, and expansion joints that make up these often complex systems. It uses hundreds of calculations and examples based on the author's 40 years of experiences as both an engineer and instructor. Each example demonstrates how the code and standard has been correctly and incorrectly applied. Aside from advising on the intent of codes and standards, the book provides advice on compliance. Readers will come away with a clear understanding of how piping systems fail and what the code requires the designer, manufacturer, fabricator, supplier, erector, examiner, inspector, and owner to do to prevent such failures. The book enhances participants' understanding and application of the spirit of the code or standard and form a plan for compliance. The book covers American Water Works Association standards where they are applicable. - Updates to major codes and standards such as ASME B31.1 and B31.12 - New methods for calculating stress intensification factor (SIF) and seismic activities - Risk-based analysis based on API 579, and B31-G - Covers the Pipeline Safety Act and the creation of PhMSA
This book was created with over (10,000) formulas worked out to create over (1,600) pipe templates to simplify the everyday task of pipe layout and fabrication for pipefitters and welders. In this book you will find pipe templates for the following. Concentric LR 90 degree base ell supports for (1 1/2" pipe on 1 1/2" pipe) through (24" pipe on 48" pipe.) Dummy leg supports laying flat on 90 degree ells (1 1/2" pipe on 2" pipe) through (14" pipe on 48" pipe.) Eccentric LR 90 degree base ell supports (1 1/2" pipe on 2" pipe) through (24" pipe on 48" pipe.) Eccentric throat level LR 90 degree base ell support (1 1/2" pipe on 2" pipe) through (24" pipe on 48" pipe.) 22 1/2 degree lateral through 60 degree lateral (1 1/2" pipe on 1 1/2" pipe) through (24" pipe on 48" pipe.) 7 1/2 degree miters through 45 degree miters (1 1/2" pipe) through (48" pipe) Orange peel head (2" pipe) through (24" pipe) Concentric reducers (3" x 2") through (24" x 22") Eccentric reducers (3" x 2") through (24" x 22") 90 degree concentric saddle tee (1 1/2" pipe on 1 1/2" pipe) through (42" pipe on 48" pipe) 90 degree eccentric saddle tee (1 1/2" pipe on 2" pipe) through (42" pipe on 48" pipe) This book also includes pipe information on decimal equivalents charts, decimal of a foot chart, fitting to fitting make-up dimension chart, formula's for center line dimensions of trimmed elbows, chart for length and spacing dimensions for nozzles with and without reinforcing pads, multiplier constants, pipe circumference chart, pipe data charts by schedule and weights and wall thickness and weights, formula's for solving known and unknown angles, chart for dimensions of span distance for dummy legs, standard valve dimensions chart and trigonometric formula tables.
This is the eBook of the printed book and may not include any media, website access codes, or print supplements that may come packaged with the bound book. DESCRIPTION This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes Welding Safety, Oxyfuel Cutting, Plasma Arc Cutting, Air Carbon Arc Cutting and Gouging, Base Metal Preparation, Weld Quality, SMAW – Equipment and Safety, Shielded Metal Arc Electrodes, SMAW – Beads and Fillet Welds, Joint Fit-Up and Alignment, SMAW – Groove Welds and Backing, and SMAW – Open V-Groove Welds. Instructor Supplements Instructors: Product supplements may be ordered directly through OASIS at http://oasis.pearson.com. For more information contact your Pearson NCCER/Contren Sales Specialist at http://nccer.pearsonconstructionbooks.com/store/sales.aspx. Print Instructor’s Guide Package 978-013-428575-7 (Includes Lesson Plans and access to the online resources) NCCER CONNECT Trainee Guide Hardcover + Access Card Package: $92 978-0-13-287365-9 Trainee Guide Paperback + Access Card Package: $90 978-0-13-287364-2 IG Paperback + Access Card Package: $165 978-0-13-287366-6 Access Card ONLY for Trainee Guide: $67 (does not include print book) 978-0-13-285926-4 Access Card ONLY for IG: $100 (does not include print book) 978-0-13-286043-7 ELECTRONIC Access Code ONLY for Trainee Guide: $67 (must be ordered electronically via OASIS; does not include print book) 978-0-13-292123-7 ELECTRONIC Access Code ONLY for IG: $100 (must be ordered electronically via OASIS; does not include print book) 978-0-13-292124-4