Download Free Physicochemical Aspects Of Food Engineering And Processing Book in PDF and EPUB Free Download. You can read online Physicochemical Aspects Of Food Engineering And Processing and write the review.

Physical and chemical interactions between various constituents resulting from processing operations often lead to physical, sensory, and nutritional changes in foods. Combining important information on processing and food quality, Physicochemical Aspects of Food Engineering and Processing describes the effects of various processing technologies on
Food materials are processed prior to their consumption using different processing technologies that improve their shelf life and maintain their physicochemical, biological, and sensory qualities. Introduction to Advanced Food Process Engineering provides a general reference on various aspects of processing, packaging, storage, and quality control and assessment systems, describing the basic principles and major applications of emerging food processing technologies. The book is divided into three sections, systematically examining processes from different areas of food process engineering. Section I covers a wide range of advanced food processing technologies including osmo-concentration of fruits and vegetables, membrane technology, nonthermal processing, emerging drying technologies, CA and MA storage of fruits and vegetables, nanotechnology in food processing, and computational fluid dynamics modeling in food processing. Section II describes food safety and various non-destructive quality assessment systems using machine vision systems, vibrational spectroscopy, biosensors, and chemosensors. Section III explores waste management, by-product utilization, and energy conservation in food processing industry. With an emphasis on novel food processes, each chapter contains case studies and examples to illustrate state-of-the-art applications of the technologies discussed.
The processing of food generally implies the transformation of the perishable raw food to value-added products. It imparts benefits, such as the destruction of surface microflora, and inactivation of deleterious enzymes, such as peroxidase, leading to a greater shelf life of the food. It also enhances color and texture while maintaining quality of products and makes them edible. However, it also has an inevitable impact on nutritional quality attributes, such as increase or decrease in certain vitamins and bioactive metabolites among others. Food Processing Technologies: Impact on Product Attributes covers a range of food processing technologies and their effect on various food product attributes, such as bioactive compounds, safety, and sensory and nutritional aspects of the food upon processing. There are eight major parts in the book. Part I covers the conventional processing technologies. Parts II, III, IV, and V deal with various novel processing technologies, including impingement processing technologies, electro-magnetic processing technologies, physico-mechanical processing technologies, and electro-technologies. Part VI introduces chemical processing technologies. Part VII comprise irradiation processing technology, and the final part is focused on biological processing technology, detailing the application of enzymes in food processing. Numerous studies were carried out to find the impact of these processing technologies on various aspects of food and associated health promotion properties. Both positive and negative results were obtained based on nature of foods, processing type, and duration of processing, and this book covers these results in depth.
This useful reference is the first book to address key aspects of food powder technology. It assembles organized and updated information on the physical properties, production, and functionality of food powder, previously unavailable in book form.
Covers a Host of Groundbreaking TechniquesThermal processing is known to effectively control microbial populations in food, but the procedure also has a downsideit can break down the biochemical composition of foods, resulting in a marked loss of sensory and nutritional quality. Processing Effects on Safety and Quality of Foods delineates three dec
Due to their unique properties and ability to interact with other food components, biopolymers have traditionally played a major role in food processing. Biopolymer Engineering in Food Processing explores processing technology associated with biopolymer applications and discusses both operational and economic aspects. Following an overview of biopolymer applications and their functionality in different processes, the text examines: Production routes, availability, costs, and physicochemical properties of commercial biopolymers Rheology of biopolymer suspensions, how concentration and shear may affect their flow behavior, and their response to pressure losses and heat transfer during flow Effects of food processing and storage conditions on the viscoelastic and textural properties of food gels Mechanical and mass transfer properties of films and coating produced from biopolymers, composites, and nanocomposites The use of biopolymer coatings to reduce oil uptake during deep-fat frying of foods and in modified atmosphere storage of foods The book also explores the application of biopolymers in separation processes for recovery of biocompounds. It discusses biopolymer behavior during thermoplastic extrusion and the response of certain cereals and snacks to extrusion operating parameters. Finally, it reviews engineering aspects of biopolymers used as drying aids in spray-drying and freeze-drying of fruit juices and pulps and discusses biopolymers used as cryoprotectants in food freezing. A comprehensive source of scientific and technical information for those involved with process design and research and development, the book is also an ideal reference for academic researchers and undergraduate and postgraduate students.
Consumer expectations are systematically growing, with demands for foods with a number of attributes, which are sometimes difficult for manufacturers to meet. The engineering processes that are needed to obtain top-quality foods are a major challenge due to the diversity of raw materials, intermediates, and final products. As in any other enterprise, the food industry must optimize each of the steps in the production chain to attain the best possible results. There is no question that a very important aspect to take into consideration when developing a process, designing a food factory, or modifying existing facilities is the in-depth knowledge of the basic engineering aspects involved in a given project. Introduction to Food Process Engineering covers the fundamental principles necessary to study, understand, and analyze most unit operations in the food engineering domain. It was conceived with two clear objectives in mind: 1) to present all of the subjects in a systematic, coherent, and sequential fashion in order to provide an excellent knowledge base for a number of conventional and unconventional processes encountered in food industry processing lines, as well as novel processes at the research and development stages; 2) to be the best grounding possible for another CRC Press publication, Unit Operations in Food Engineering, Second Edition, by the same authors. These two books can be consulted independently, but at the same time, there is a significant and welcomed match between the two in terms of terminology, definitions, units, symbols, and nomenclature. Highlights of the book include: Dimensional analysis and similarities Physicochemistry of food systems Heat and mass transfer in food Food rheology Physical properties Water activity Thermal processing Chilling and freezing Evaporation Dehydration Extensive examples, problems, and solutions
This book provides a fundamental understanding of physical properties of foods. It is the first textbook in this area and combines engineering concepts and physical chemistry. Basic definitions and principles of physical properties are discussed as well as the importance of physical properties in the food industry and measurement methods. In addition, recent studies in physical properties are summarized. The material presented is helpful for students to understand the relationship between physical and functional properties of raw, semi-finished, and processed food in order to obtain products with desired shelf-life and quality.
Ten years have passed since this reference's last edition - making Engineering Properties of Foods, Third Edition the must-have resource for those interested in food properties and their variations. Defined are food properties and the necessary theoretical background for each. Also evaluated is the usefulness of each property i
The first guide to compile current research and frontline developments in the science of process intensification (PI), Re-Engineering the Chemical Processing Plant illustrates the design, integration, and application of PI principles and structures for the development and optimization of chemical and industrial plants. This volume updates professionals on emerging PI equipment and methodologies to promote technological advances and operational efficacy in chemical, biochemical, and engineering environments and presents clear examples illustrating the implementation and application of specific process-intensifying equipment and methods in various commercial arenas.