Download Free Physical Chemical Treatment Of Water And Wastewater Book in PDF and EPUB Free Download. You can read online Physical Chemical Treatment Of Water And Wastewater and write the review.

The books currently available on this subject contain some elements of physical-chemical treatment of water and wastewater but fall short of giving comprehensive and authoritative coverage. They contain some equations that are not substantiated, offering empirical data based on assumptions that are therefore difficult to comprehend. This text brings together the information previously scattered in several books and adds the knowledge from the author's lectures on wastewater engineering. Physical-Chemical Treatment of Water and Wastewater is not only descriptive but is also analytical in nature. The work covers the physical unit operations and unit processes utilized in the treatment of water and wastewater. Its organization is designed to match the major processes and its approach is mathematical. The authors stress the description and derivation of processes and process parameters in mathematical terms, which can then be generalized into diverse empirical situations. Each chapter includes design equations, definitions of symbols, a glossary of terms, and worked examples. One author is an environmental engineer and a professor for over 12 years and the other has been in the practice of environmental engineering for more than 20 years. They offer a sound analytical mathematical foundation and description of processes. Physical-Chemical Treatment of Water and Wastewater fills a niche as the only dedicated textbook in the area of physical and chemical methods, providing an analytical approach applicable to a range of empirical situations Contents Introduction Characteristics of Water and Wastewater Quantity of Water and Wastewater Constituents of Water and Wastewater Unit Operations of Water and Wastewater Treatment Flow Measurements and Flow and Quality Equalizations Pumping Screening, Settling, and Flotation Mixing and Flocculation Conventional Filtration Advanced Filtration and Carbon Adsorption Aeration, Absorption, and Stripping Unit Processes of Water and Wastewater Treatment Water Softening Water Stabilization Coagulation Removal of Iron and Manganese by Chemical Precipitation Removal of Phosphorus by Chemical Precipitation Removal of Nitrogen by Nitrification-Denitrification Ion Exchange Disinfection
Explains the fundamental theory and mathematics of water and wastewater treatment processes By carefully explaining both the underlying theory and the underlying mathematics, this text enables readers to fully grasp the fundamentals of physical and chemical treatment processes for water and wastewater. Throughout the book, the authors use detailed examples to illustrate real-world challenges and their solutions, including step-by-step mathematical calculations. Each chapter ends with a set of problems that enable readers to put their knowledge into practice by developing and analyzing complex processes for the removal of soluble and particulate materials in order to ensure the safety of our water supplies. Designed to give readers a deep understanding of how water treatment processes actually work, Water Quality Engineering explores: Application of mass balances in continuous flow systems, enabling readers to understand and predict changes in water quality Processes for removing soluble contaminants from water, including treatment of municipal and industrial wastes Processes for removing particulate materials from water Membrane processes to remove both soluble and particulate materials Following the discussion of mass balances in continuous flow systems in the first part of the book, the authors explain and analyze water treatment processes in subsequent chapters by setting forth the relevant mass balance for the process, reactor geometry, and flow pattern under consideration. With its many examples and problem sets, Water Quality Engineering is recommended as a textbook for graduate courses in physical and chemical treatment processes for water and wastewater. By drawing together the most recent research findings and industry practices, this text is also recommended for professional environmental engineers in search of a contemporary perspective on water and wastewater treatment processes.
Based upon half a century of research by the authors, Physical and Chemical Separation in Water and Wastewater Treatment addresses the whole water cycle spectrum, from global hydrological cycle, urban-regional metabolic cycle to individual living and production cycle, with respect to quality control technology based on fundamental science and theories. For every treatment process, basic scientific and environmental physical and chemical natures are explained with respect to those of water and its impurities. Health danger and risks for human beings are also covered. The authors define water qualities on a “Water Quality Matrix” composed of 35 elements. The vertical axis (row), has individual 7digit impurity size from 10-10m (water molecule 3?) to 10-3m (0.1mm sand grains) and in the horizontal axis(column) there are 5 categories of surrogate chemical and biochemical quality indices. The same 35 element matrix is used to correspond with several typical water quality treatments, unit-operation/unit-process, with a suitable characteristic grouping of the elements. The authors then present “the Water Quality Conversion Matrix” or “Water Quality Treatment Matrix”. With respect to typical treatment processes, the basic concept and scientific background are explained and the background of the technologies is clarified. Mechanisms of the process are explained and a kinetic process is formulated. The kinetics are experimentally verified quantitatively with important equilibrium and rate constants. Based on the authors’ research, various new treatment technologies are proposed with high efficiency, high capacity and less energy, and with steady operation ability. This comprehensive reference book is intended for undergraduate and graduate students, and also serves as a guide book for practical engineers and industry and university researchers.
Water pollution occurs when toxic pollutants of varying kinds (organic, inorganic, radioactive and so on) are directly or indirectly discharged into water bodies without adequate treatment to remove such potential pollutants. Today's sources of these potential pollutants, which cause high deterioration of freshwater quality, are city sewage and industrial waste discharge, human agricultural practices, industrial waste disposal practices, mining activities, civil and structural work activities and obviously natural contamination with climate change. When our water is polluted, it is not only devastating to the environment but also to human health. Therefore, development of water and wastewater treatment processes to alleviate water pollution has been a challenging and demanding task for engineers, scientists and researchers. Perhaps this is even more challenging for underdeveloped and developing countries, where water and wastewater treatment facilities, knowledge and infrastructure are limited. Water and wastewater treatment processes are broad and often multidisciplinary in nature, comprising a mixture of research areas including physical, chemical and biological methods to remove or transform various potential pollutants. This is in hopes to achieve acceptable water quality and satisfy governmental and environmental protection agencies' laws and regulations. With these objectives, this book has been written in order to provide various research results and compilation and up-to-date development on the current states of knowledge and techniques in the broad field of water and wastewater treatment processes. Basically, this book will give a comprehensive understanding and advancement and application of various physical, chemical and biological treatment methods in the reduction of potential pollutants (inorganics/organics) from water and wastewater. There are a total 18 book chapters contributed by large number of expert authors around the world, covering the following main research areas: Physical, chemical and biological water treatment processes such as adsorption, biosorption, coagulation/flocculation, electrocoagulation, denitration, membrane filtration/separation, photo-catalytic reduction, advanced oxidation, nutrients removal by struvite crystallisation and nanotechnology; Physical, chemical and biological methods for municipal wastewater and industrial wastewater treatment plants such as primary-secondary sludge treatments, anaerobic digestions, aerobic treatment, activated sludge processes, dewaterability by flocculants, pre-treatments of sludge and rheology of sludge in wastewater treatment; Various operational units/equipment and process control of wastewater treatment plant.
Carefully designed to balance coverage of theoretical and practical principles, Fundamentals of Water Treatment Unit Processes delineates the principles that support practice, using the unit processes approach as the organizing concept. The author covers principles common to any kind of water treatment, for example, drinking water, municipal wastew
Provides an excellent balance between theory and applications in the ever-evolving field of water and wastewater treatment Completely updated and expanded, this is the most current and comprehensive textbook available for the areas of water and wastewater treatment, covering the broad spectrum of technologies used in practice today—ranging from commonly used standards to the latest state of the art innovations. The book begins with the fundamentals—applied water chemistry and applied microbiology—and then goes on to cover physical, chemical, and biological unit processes. Both theory and design concepts are developed systematically, combined in a unified way, and are fully supported by comprehensive, illustrative examples. Theory and Practice of Water and Wastewater Treatment, 2nd Edition: Addresses physical/chemical treatment, as well as biological treatment, of water and wastewater Includes a discussion of new technologies, such as membrane processes for water and wastewater treatment, fixed-film biotreatment, and advanced oxidation Provides detailed coverage of the fundamentals: basic applied water chemistry and applied microbiology Fully updates chapters on analysis and constituents in water; microbiology; and disinfection Develops theory and design concepts methodically and combines them in a cohesive manner Includes a new chapter on life cycle analysis (LCA) Theory and Practice of Water and Wastewater Treatment, 2nd Edition is an important text for undergraduate and graduate level courses in water and/or wastewater treatment in Civil, Environmental, and Chemical Engineering.
An Overview of Water and Wastewater; What Filtration Is All About; Chemical Additives that Enhance Filtration; Selecting the Right Filter Media; What Pressure- and Cake-Filtration Are All; Cartridge and Other Filters Worth Mentioning; What Sand Filtration is All About; Sedimentation, Clarification, Flotation, and Membrane Separation Technologies; Ion Exchange and Carbon Adsorption; Water Sterilization Technologies; Treating the Sludge; Glossary; Index.
Recently, research efforts aiming to improve energy efficiency of wastewater treatment processes for large centralized wastewater treatment plants (WWTPs) have been increasing. Global warming impacts, energy sustainability, and biosolids generation are among several key drivers towards the establishment of energy-efficient WWTPs. WWTPs have been recognized as major contributors of greenhouse gas emissions as these are significant energy consumers in the industrialized world. The quantity of biosolids or excess waste activated sludge produced by WWTP will increase in the future due to population growth and this pose environmental concerns and solid waste disposal issues. Due to limited capacity of landfill sites, more stringent environmental legislation, and air pollution from incineration sites, there is a need to rethink the conventional way of dealing with wastewater and the sludge production that comes with it. This book provides an overview of advanced biological, physical and chemical treatment with the aim of reducing the volume of sewage sludge. Provides a comprehensive list of processes aiming at reducing the volume of sewage sludge and increasing biogas production from waste activated sludge. Includes clear process flowsheet showing how the process is modified compared to the conventional waste activated sludge process. Provides current technologies applied on full scale plant as well as methods still under investigation at laboratory scale. Offers data from pilot scale experience of these processes
This second edition demonstrates how chemistry influences the design of water treatment plants and how it should influence the design. Historically, water treatment plants have been designed from hydraulic considerations with little regard to chemical aspects. The many chemical reactions used for removal of pollutants from water simply cannot be forced to occur within current designs. This book re-examines this traditional approach in light of today's water quality and treatment. Will current water treatment processes be sufficient to meet future demands or will new processes have to be devised? Chemistry of Water Treatment assesses the chemical and physical efficacies of current processes to meet the demands of the Safe Drinking water Act, providing expert information to persons responsible for the production of potable water into the next century.
The books currently available on this subject contain some elements of physical-chemical treatment of water and wastewater but fall short of giving comprehensive and authoritative coverage. They contain some equations that are not substantiated, offering empirical data based on assumptions that are therefore difficult to comprehend. This text brings together the information previously scattered in several books and adds the knowledge from the author's lectures on wastewater engineering. Physical-Chemical Treatment of Water and Wastewater is not only descriptive but is also analytical in nature. The work covers the physical unit operations and unit processes utilized in the treatment of water and wastewater. Its organization is designed to match the major processes and its approach is mathematical. The authors stress the description and derivation of processes and process parameters in mathematical terms, which can then be generalized into diverse empirical situations. Each chapter includes design equations, definitions of symbols, a glossary of terms, and worked examples. One author is an environmental engineer and a professor for over 12 years and the other has been in the practice of environmental engineering for more than 20 years. They offer a sound analytical mathematical foundation and description of processes. Physical-Chemical Treatment of Water and Wastewater fills a niche as the only dedicated textbook in the area of physical and chemical methods, providing an analytical approach applicable to a range of empirical situations