Download Free Performance Of Back Primed And Factory Finished Hardboard Lap Siding In Southern Florida Book in PDF and EPUB Free Download. You can read online Performance Of Back Primed And Factory Finished Hardboard Lap Siding In Southern Florida and write the review.

Because of performance problems with hardboard siding in southern Florida, the U.S. Department of Housing and Urban Development (HUD) proposed a local standard requiring prefinishing of siding and priming of all siding surfaces, including the back. However, the effectiveness of these practices was questioned. To determine if back-priming or factory finishing improves durability and performance of hardboard siding, we installed factory-finished and factory-primed siding on two buildings in southern Florida. The buildings were identical except that one had gutters and no overhangs and the other had overhangs and no gutters. Half the siding was back-primed and half was not. Moisture content, temperature, and air pressure difference across the siding were continuously monitored for 2 years. Condition and thickness of siding boards were recorded every 3 months. After removal from the buildings, siding was inspected and final moisture contents were determined. The siding was in excellent condition after about 2Â years of outside exposure. There was no evidence that back-priming the siding reduced its in-service moisture content. Whether the siding was from the overhang building or the guttered building did not seem to make a difference, but inspection of the windows and final moisture contents of the trim strongly suggested that overhangs provided additional protection on the gable ends (gutters were only present on the sidewalls).
Over the concluding decades of the twentieth century, the historic preservation community increasingly turned its attention to modern buildings, including bungalows from the 1930s, gas stations and diners from the 1940s, and office buildings and architectural homes from the 1950s. Conservation efforts, however, were often hampered by a lack of technical information about the products used in these structures, and to fill this gap Twentieth-Century Building Materials was developed by the U.S. Department of the Interior’s National Park Service and first published in 1995. Now, this invaluable guide is being reissued—with a new preface by the book’s original editor. With more than 250 illustrations, including a full-color photographic essay, the volume remains an indispensable reference on the history and conservation of modern building materials. Thirty-seven essays written by leading experts offer insights into the history, manufacturing processes, and uses of a wide range of materials, including glass block, aluminum, plywood, linoleum, and gypsum board. Readers will also learn about how these materials perform over time and discover valuable conservation and repair techniques. Bibliographies and sources for further research complete the volume. The book is intended for a wide range of conservation professionals including architects, engineers, conservators, and material scientists engaged in the conservation of modern buildings, as well as scholars in related disciplines.
Published by the Architecural Woodwork Institue, the Woodwork Institute and the Architectural Woodwork Manufacturers Association of Canada, The Architectural Woodwork Standards is the architectural woodwork industry's comprehensive standard for quality, construction methods, finishing and installation of fine architectural woodwork. On October 1, 2009, the new AWS book replaces the AWI-AWMAC Quality Standards Illustrated and the WI Manual of Millwork as the industry standards.
A joint publication of the Architectural Woodwork Institute (AWI), the Architectural woodwork Manufacturers Association of Canada (AWMAC), and the Woodwork Institute (WI).
As existing buildings age, nearly half of all construction activity in Britain is related to maintenance, refurbishment and conversions. Building adaptation is an activity that continues to make a significant contribution to the workload of the construction industry. Given its importance to sustainable construction, the proportion of adaptation works in relation to new build is likely to remain substantial for the foreseeable future, especially in the developed parts of the world. Building Adaptation, Second Edition is intended as a primer on the physical changes that can affect older properties. It demonstrates the general principles, techniques, and processes needed when existing buildings must undergo alteration, conversion, extension, improvement, or refurbishment. The publication of the first edition of Building Adaptation reflected the upsurge in refurbishment work. The book quickly established itself as one of the core texts for building surveying students and others on undergraduate and postgraduate built environment courses. This new edition continues to provide a comprehensive introduction to all the key issues relating to the adaptation of buildings. It deals with any work to a building over and above maintenance to change its capacity, function or performance.