Download Free Optimum Book in PDF and EPUB Free Download. You can read online Optimum and write the review.

Optimization is a mathematical tool developed in the early 1960's used to find the most efficient and feasible solutions to an engineering problem. It can be used to find ideal shapes and physical configurations, ideal structural designs, maximum energy efficiency, and many other desired goals of engineering. This book is intended for use in a first course on engineering design and optimization. Material for the text has evolved over a period of several years and is based on classroom presentations for an undergraduate core course on the principles of design. Virtually any problem for which certain parameters need to be determined to satisfy constraints can be formulated as a design optimization problem. The concepts and methods described in the text are quite general and applicable to all such formulations. Inasmuch, the range of application of the optimum design methodology is almost limitless, constrained only by the imagination and ingenuity of the user. The book describes the basic concepts and techniques with only a few simple applications. Once they are clearly understood, they can be applied to many other advanced applications that are discussed in the text. Allows engineers involved in the design process to adapt optimum design concepts in their work using the material in the text Basic concepts of optimality conditions and numerical methods are described with simple examples, making the material high teachable and learnable Classroom-tested for many years to attain optimum pedagogical effectiveness
This book deals with a basic problem arising within the Bayesian approach 1 to scientific methodology, namely the choice of prior probabilities. The problem will be considered with special reference to some inference methods used within Bayesian statistics (BS) and the so-called theory of inductive 2 probabilities (T/P). In this study an important role will be played by the assumption - defended by Sir Karl Popper and the supporters of the current verisimilitude theory (VT) - that the cognitive goal of science is the achievement of a high degree of truthlikeness or verisimilitude. A more detailed outline of the issues and objectives of the book is given in Section 1. In Section 2 the historical background of the Bayesian approach and the verisimilitude theory is briefly illustrated. In Section 3, the methods used in TIP and BS for making multinomial inference~ are considered and some conceptual relationships between TIP and BS are pointed out. In Section 4 the main lines of a new approach to the problem of the choice of prior probabilities are illustrated. Lastly, in Section 5 >the structure of the book is described and a first explanation of some technical terms is provided.
The Optimum-Path Forest (OPF) classifier was first published in 2008 in its supervised and unsupervised versions with applications in medicine and image classification. Since then, it has expanded to a variety of other applications such as remote sensing, electrical and petroleum engineering, and biology. In recent years, multi-label and semi-supervised versions were also developed to handle video classification problems. The book presents the principles, algorithms and applications of Optimum-Path Forest, giving the theory and state-of-the-art as well as insights into future directions. - Presents the first book on Optimum-path Forest - Shows how it can be used with Deep Learning - Gives a wide range of applications - Includes the methods, underlying theory and applications of Optimum-Path Forest (OPF)
Well-known authority, Dr. Van Trees updates array signal processing for today's technology This is the most up-to-date and thorough treatment of the subject available Written in the same accessible style as Van Tree's earlier classics, this completely new work covers all modern applications of array signal processing, from biomedicine to wireless communications
In this book, we study theoretical and practical aspects of computing methods for mathematical modelling of nonlinear systems. A number of computing techniques are considered, such as methods of operator approximation with any given accuracy; operator interpolation techniques including a non-Lagrange interpolation; methods of system representation subject to constraints associated with concepts of causality, memory and stationarity; methods of system representation with an accuracy that is the best within a given class of models; methods of covariance matrix estimation;methods for low-rank matrix approximations; hybrid methods based on a combination of iterative procedures and best operator approximation; andmethods for information compression and filtering under condition that a filter model should satisfy restrictions associated with causality and different types of memory.As a result, the book represents a blend of new methods in general computational analysis,and specific, but also generic, techniques for study of systems theory ant its particularbranches, such as optimal filtering and information compression.- Best operator approximation,- Non-Lagrange interpolation,- Generic Karhunen-Loeve transform- Generalised low-rank matrix approximation- Optimal data compression- Optimal nonlinear filtering
The transmitter and receiver are jointly optimized with a minimum average-probability-of-error criterion. The transmitted waveforms are binary and the receiver is nonlinear with zero memory. Errors are due to additive, Gaussian noise, with independent samples, and adjacent symbol interference. The channel impulse response is assumed to be known and time-invariant. The optimum waveforms are given by the eigenfunction corresponding to the maximum eigenvalue of a symmetric integral operator. In addition, the optimum receiver is given for extensive inter-symbol interference, and its probability of error is formulated. The results are applied to data representing an experimental, bandpass, telephone channel with quadratic delay. This example shows approximately 5.5-dB performance improvement over a rectangularly pulsed carrier and standard correlation receiver. The system developed here tends to minimize the effect of inter-symbol interference while transferring maximum energy through the channel. This is contrasted with systems that eliminate the inter-symbol interference at the expense of a reduction in energy transferred.
A general method concerning optimum problems in nonstationary flight is developed and discussed.
Introduction to Optimum Design is the most widely used textbook in engineering optimization and optimum design courses. It is intended for use in a first course on engineering design and optimization at the undergraduate or graduate level within engineering departments of all disciplines, but primarily within mechanical, aerospace and civil engineering. The basic approach of the text is to describe an organized approach to engineering design optimization in a rigorous yet simplified manner, illustrate various concepts and procedures with simple examples, and demonstrate their applicability to engineering design problems. Formulation of a design problem as an optimization problem is emphasized and illustrated throughout the text. Excel and MATLAB are featured throughout as learning and teaching aids. The 3rd edition has been reorganized and enhanced with new material, making the book even more appealing to instructors regardless of the level they teach the course. Examples include moving the introductory chapter on Excel and MATLAB closer to the front of the book and adding an early chapter on practical design examples for the more introductory course, and including a final chapter on advanced topics for the purely graduate level course. Basic concepts of optimality conditions and numerical methods are described with simple and practical examples, making the material highly teachable and learnable. Applications of the methods for structural, mechanical, aerospace and industrial engineering problems. Introduction to MATLAB Optimization Toolbox. Optimum design with Excel Solver has been expanded into a full chapter. Practical design examples introduce students to usage of optimization methods early in the book. New material on several advanced optimum design topics serves the needs of instructors teaching more advanced courses.
This book contains the papers presented at the International Symposium, "The Optimum Shape: Automated Structural Design," held at the General Motors Research Laboratories on September 3D-October 1, 1985. This was the 30th symposium in a series which the Research Laboratories began sponsoring in 1957. Each symposium has focused on a topic that is both under active study at the Research Laboratories and is also of interest to the larger technical community. While attempts to produce a structure which performs a certain task with the minimum amount of resources probably predates recorded civilization, the idea of coupling formal optimization techniques with computer-based structural analysis techniques was first proposed in the early 1960s. Although it was recognized at this time that the most fundamental description of the problem would be in terms of the shape or contours of the structure, much of the early work described the problem in terms of structural sizing parameters instead of geometrical descriptions. Within the past few years, several research groups have started to explore this more fundamental area of shape design. Initial research has raised many new questions about appropriate selection of design variables, methods of calculating derivatives, and generation of the underlying analysis problem.