Download Free Optimization Based Methods For Nonlinear And Hybrid Systems Verification Book in PDF and EPUB Free Download. You can read online Optimization Based Methods For Nonlinear And Hybrid Systems Verification and write the review.

This book summarizes the main achievements of the EC funded 6th Framework Program project COFCLUO – Clearance of Flight Control Laws Using Optimization. This project successfully contributed to the achievement of a top-level objective to meet society’s needs for a more efficient, safer and environmentally friendly air transport by providing new techniques and tools for the clearance of flight control laws. This is an important part of the certification and qualification process of an aircraft – a costly and time-consuming process for the aeronautical industry. The overall objective of the COFCLUO project was to develop and apply optimization techniques to the clearance of flight control laws in order to improve efficiency and reliability. In the book, the new techniques are explained and benchmarked against traditional techniques currently used by the industry. The new techniques build on mathematical criteria derived from the certification and qualification requirements together with suitable models of the aircraft. The development of these criteria and models are also presented in the book. Because of wider applicability, the optimization-based clearance of flight control laws will open up the possibility to design innovative aircraft that today are out of the scope using classical clearance tools. Optimization-based clearance will not only increase safety but it will also simplify the whole certification and qualification process, thus significantly reduce cost. The achieved speedup will also support rapid modeling and prototyping and reduce “time to market”.
The open access two-volume set LNCS 11561 and 11562 constitutes the refereed proceedings of the 31st International Conference on Computer Aided Verification, CAV 2019, held in New York City, USA, in July 2019. The 52 full papers presented together with 13 tool papers and 2 case studies, were carefully reviewed and selected from 258 submissions. The papers were organized in the following topical sections: Part I: automata and timed systems; security and hyperproperties; synthesis; model checking; cyber-physical systems and machine learning; probabilistic systems, runtime techniques; dynamical, hybrid, and reactive systems; Part II: logics, decision procedures; and solvers; numerical programs; verification; distributed systems and networks; verification and invariants; and concurrency.
This book presents the state-of-the-art and breakthrough innovations in design automation for cyber-physical systems.The authors discuss various aspects of cyber-physical systems design, including modeling, co-design, optimization, tools, formal methods, validation, verification, and case studies. Coverage includes a survey of the various existing cyber-physical systems functional design methodologies and related tools will provide the reader unique insights into the conceptual design of cyber-physical systems.
This book presents 5 tutorial lectures by leading researchers given at the ICTAC 2013 Software Engineering School on Unifying Theories of Programming and Formal Engineering Methods, held in Shanghai, China in August 2013.The lectures are aimed at postgraduate students, researchers, academics, and industrial engineers. They cover topics such as component-based and service-oriented systems, real-time systems, hybrid systems, cyber physical systems, and present techniques such as inductive theorem proving, model checking, correction by construction through refinement and model transformations, synthesis, and computer algebra. Two of the courses are explicitly related to Hoare and He's Unifying Theories of Programming.
This book constitutes the refereed proceedings of the 22nd International Symposium on Formal Methods, FM 2018, held in Oxford, UK, in July 2018. The 44 full papers presented together with 2 invited papers were carefully reviewed and selected from 110 submissions. They present formal methods for developing and evaluating systems. Examples include autonomous systems, robots, and cyber-physical systems in general. The papers cover a broad range of topics in the following areas: interdisciplinary formal methods; formal methods in practice; tools for formal methods; role of formal methods in software systems engineering; and theoretical foundations.
This book consists of lecture notes of a summer school named after the late Jacques Louis Lions. The summer school was designed to alert both Academia and Industry to the increasing role of multidisciplinary methods and tools for the design of complex products in various areas of socio-economic interest. This volume offers the reader a rare opportunity of being exposed to the presentation of real industrial and societal problems together with the relevant innovative methods used.
This book constitutes the strictly refereed post-proceedings of the 5th International Hybrid Systems Workshop held in Notre Dame, Indiana, USA in September 1998. The 23 revised full papers presented in the book have gone through two rounds of thorough reviewing and revision. The volume presents state-of-the-art research results and particularly addresses such areas as program verification, concurrent and distributed processes, logic programming, logics of programs, discrete event simulation, calculus of variations, optimization, differential geometry, Lie algebras, automata theory, dynamical systems, etc.
The present book includes extended and revised versions of a set of selected papers from the 1st International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2011) which was sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC) and held in Noordwijkerhout, The Netherlands. SIMULTECH 2011 was technically co-sponsored by the Society for Modeling & Simulation International (SCS), GDR I3, Lionphant Simulation and Simulation Team and held in cooperation with ACM Special Interest Group on Simulation and Modeling (ACM SIGSIM) and the AIS Special Interest Group of Modeling and Simulation (AIS SIGMAS).
This unique text blends together state estimation and chemometrics for the application of advanced data-processing techniques. State Estimation in Chemometrics, second edition describes the basic methods for chemical analysis—the multicomponent, calibration and titration systems—from a new perspective. It succinctly reviews the history of state estimation and chemometrics and provides examples of its many applications, including classical estimation, state estimation, nonlinear estimation, the multicomponent, calibration and titration systems and the Kalman filter. The concepts are introduced in a logical way and built up systematically to appeal to specialist post-graduates working in this area as well as professionals in other areas of chemistry and engineering. This new edition covers the latest research in chemometrics, appealing to readers in bio-engineering, food science, pharmacy, and the life sciences fostering cross-disciplinary research. - Features a new chapter surveying the most up-to-date scientific literature on chemometrics, highlighting developments that have occurred since the first edition published - Includes a new chapter devoted to new applications for state estimation in chemometrics - Covers a new chapter entirely devoted to subspace identification methods - Provides several new real-life examples of methods such as multiple modeling, principal component analysis, iterative target transformation factor analysis, and the generalized standard addition method
This open access two-volume set LNCS 13371 and 13372 constitutes the refereed proceedings of the 34rd International Conference on Computer Aided Verification, CAV 2022, which was held in Haifa, Israel, in August 2022. The 40 full papers presented together with 9 tool papers and 2 case studies were carefully reviewed and selected from 209 submissions. The papers were organized in the following topical sections: Part I: Invited papers; formal methods for probabilistic programs; formal methods for neural networks; software Verification and model checking; hyperproperties and security; formal methods for hardware, cyber-physical, and hybrid systems. Part II: Probabilistic techniques; automata and logic; deductive verification and decision procedures; machine learning; synthesis and concurrency. This is an open access book.