Download Free Optimal Linear Controller Design For Periodic Inputs Book in PDF and EPUB Free Download. You can read online Optimal Linear Controller Design For Periodic Inputs and write the review.

Optimal Linear Controller Design for Periodic Inputs proposes a general design methodology for linear controllers facing periodic inputs which applies to all feedforward control, estimated disturbance feedback control, repetitive control and feedback control. The design methodology proposed is able to reproduce and outperform the major current design approaches, where this superior performance stems from the following properties: uncertainty on the input period is explicitly accounted for, periodic performance being traded-off against conflicting design objectives and controller design being translated into a convex optimization problem, guaranteeing the efficient computation of its global optimum. The potential of the design methodology is illustrated by both numerical and experimental results.
Saturation nonlinearities are ubiquitous in engineering systems: every physical actuator or sensor is subject to saturation owing to its maximum and minimum limits. Input saturation is an operating condition that is well known to the control community for its “side effects”, which cause conventional controllers to lose their closed-loop performance as well as control authority in stabilization. Therefore, the practical application of control theory cannot avoid taking into account saturation nonlinearities in actuators, explicitly dealing with constraints in control design.
This book summarizes the main achievements of the EC funded 6th Framework Program project COFCLUO – Clearance of Flight Control Laws Using Optimization. This project successfully contributed to the achievement of a top-level objective to meet society’s needs for a more efficient, safer and environmentally friendly air transport by providing new techniques and tools for the clearance of flight control laws. This is an important part of the certification and qualification process of an aircraft – a costly and time-consuming process for the aeronautical industry. The overall objective of the COFCLUO project was to develop and apply optimization techniques to the clearance of flight control laws in order to improve efficiency and reliability. In the book, the new techniques are explained and benchmarked against traditional techniques currently used by the industry. The new techniques build on mathematical criteria derived from the certification and qualification requirements together with suitable models of the aircraft. The development of these criteria and models are also presented in the book. Because of wider applicability, the optimization-based clearance of flight control laws will open up the possibility to design innovative aircraft that today are out of the scope using classical clearance tools. Optimization-based clearance will not only increase safety but it will also simplify the whole certification and qualification process, thus significantly reduce cost. The achieved speedup will also support rapid modeling and prototyping and reduce “time to market”.
Sensor networks have recently come into prominence because they hold the potential to revolutionize a wide spectrum of both civilian and military applications. An ingenious characteristic of sensor networks is the distributed nature of data acquisition. Therefore they seem to be ideally prepared for the task of monitoring processes with spatio-temporal dynamics which constitute one of most general and important classes of systems in modelling of the real-world phenomena. It is clear that careful deployment and activation of sensor nodes are critical for collecting the most valuable information from the observed environment. Optimal Sensor Network Scheduling in Identification of Distributed Parameter Systems discusses the characteristic features of the sensor scheduling problem, analyzes classical and recent approaches, and proposes a wide range of original solutions, especially dedicated for networks with mobile and scanning nodes. Both researchers and practitioners will find the case studies, the proposed algorithms, and the numerical examples to be invaluable.
Linear, Time-varying Approximations to Nonlinear Dynamical Systems introduces a new technique for analysing and controlling nonlinear systems. This method is general and requires only very mild conditions on the system nonlinearities, setting it apart from other techniques such as those – well-known – based on differential geometry. The authors cover many aspects of nonlinear systems including stability theory, control design and extensions to distributed parameter systems. Many of the classical and modern control design methods which can be applied to linear, time-varying systems can be extended to nonlinear systems by this technique. The implementation of the control is therefore simple and can be done with well-established classical methods. Many aspects of nonlinear systems, such as spectral theory which is important for the generalisation of frequency domain methods, can be approached by this method.
The aim of this book is to propose a new approach to analysis and control of linear time-varying systems. These systems are defined in an intrinsic way, i.e., not by a particular representation (e.g., a transfer matrix or a state-space form) but as they are actually. The system equations, derived, e.g., from the laws of physics, are gathered to form an intrinsic mathematical object, namely a finitely presented module over a ring of operators. This is strongly connected with the engineering point of view, according to which a system is not a specific set of equations but an object of the material world which can be described by equivalent sets of equations. This viewpoint makes it possible to formulate and solve efficiently several key problems of the theory of control in the case of linear time-varying systems. The solutions are based on algebraic analysis. This book, written for engineers, is also useful for mathematicians since it shows how algebraic analysis can be applied to solve engineering problems. Henri Bourlès is a Professor and holds the industrial automation chair at the Conservatoire national des arts et métiers in France. He has been teaching automation for over 20 years in engineering and graduate schools. Bogdan Marinescu is currently research engineer at the French Transmission System Operator (RTE) and Associate Professor at SATIE-Ecole Normale Supérieure de Cachan.
Complexity, Analysis and Control of Singular Biological Systems follows the control of real-world biological systems at both ecological and phyisological levels concentrating on the application of now-extensively-investigated singular system theory. Much effort has recently been dedicated to the modelling and analysis of developing bioeconomic systems and the text establishes singular examples of these, showing how proper control can help to maintain sustainable economic development of biological resources. The book begins from the essentials of singular systems theory and bifurcations before tackling the use of various forms of control in singular biological systems using examples including predator-prey relationships and viral vaccination and quarantine control. Researchers and graduate students studying the control of complex biological systems are shown how a variety of methods can be brought to bear and practitioners working with the economics of biological systems and their control will also find the monograph illuminating.
Written by leading experts in the field, this book provides the state-of-the-art in terms of fault tolerant control applicable to civil aircraft. The book consists of five parts and includes online material.
This book offers a comprehensive treatment of the theory of periodic systems, including the problems of filtering and control. It covers an array of topics, presenting an overview of the field and focusing on discrete-time signals and systems.