Download Free Operation And Diagnostics Of Machines And Production Systems Operational States Ii Book in PDF and EPUB Free Download. You can read online Operation And Diagnostics Of Machines And Production Systems Operational States Ii and write the review.

This book provides novel approach to the diagnosis of complex technical systems that are widely used in various kinds of transportation, energy, metallurgy, metalworking, fuels, mining, chemical, paper industries, etc. Effective diagnostic systems are necessary for the early detection of errors in mechatronic systems, for the organization of maintenance and for the assessment of the performed service quality. Unfortunately, the practical use of AI in the diagnosis of mechatronic systems is still quite limited and the inability to build effective mechatronic systems leads to significant economic losses and dangers. The main aim of this book is to contribute to knowledge within the topic of diagnostics of mechatronic systems by the analysis of the elements reliability characteristics, using methods, models and algorithms for diagnostics and by studying examples of model diagnostic systems using AI methods based on neural networks, fuzzy inference systems and genetic algorithms.
This book presents the current situation in measurement and analysis of vibrations in production systems with the usage of water jet technology, focusing on sieve analysis and its principle of functioning. The authors compare the sizes of vibration accelerations amplitude with and without the usage of a narrow grain fraction. The data collection and frequency spectrum analysis presented form the basis for further research in this area. It is designed for researchers, educated public, students and university teachers with a technical focus on monitoring and diagnostics of technical equipment.
This volume is part of collection of contributions devoted to analytical and experimental techniques of dynamical systems, presented at the 15th International Conference “Dynamical Systems: Theory and Applications”, held in Łódź, Poland on December 2-5, 2019. The wide selection of material has been divided into three volumes, each focusing on a different field of applications of dynamical systems. The broadly outlined focus of both the conference and these books includes bifurcations and chaos in dynamical systems, asymptotic methods in nonlinear dynamics, dynamics in life sciences and bioengineering, original numerical methods of vibration analysis, control in dynamical systems, optimization problems in applied sciences, stability of dynamical systems, experimental and industrial studies, vibrations of lumped and continuous systems, non-smooth systems, engineering systems and differential equations, mathematical approaches to dynamical systems, and mechatronics.
The book presents practical examples of troubleshooting tools applied in real technological processes. The content is useful for technicians, engineers, or maintenance professionals involved in setting up technical systems and reliable operation of rotary machines. The book presents various proactive maintenance methods, exploring how they can be applied to enhance the reliability and efficiency of technical systems. The importance of technical diagnostics is highlighted, offering valuable insights into the process of identifying and analyzing potential issues. The measurement and assessment of vibrations in technical systems are examined. Moreover, the book covers assessing the condition of systems through the study of friction, lubrication, and wear. The application of technical diagnostics tools in reductors' test operation is also detailed. In the concluding section, readers will find a thoughtful synthesis of the key concepts discussed throughout the book.
Special topic volume with invited peer reviewed papers only.
This book presents a study on the influence of selected technological parameters of die casting upon strength and use properties of Al-Si alloy casts produced in die casting. It contains a theoretical part describing the principles of casting technology, and its practical part revolves around the relationship between selected technological parameters of die casting in regard to strength and use properties represented by tensile strength and porosity of die casts.
This book covers a variety of topics in material, mechanical, and management engineering, especially in the area of machine design, product assembly, measurement systems, process planning and quality control. It describes cutting-edge methods and applications, together with exemplary case studies. The content is based on papers presented at the 5th International Scientific-Technical Conference (MANUFACTURING 2017) held in Poznan, Poland on 24-26 October 2017. The book brings together engineering and economic topics, is intended as an extensive, timely and practice-oriented reference guide for researchers and practitioners, and is expected to foster better communication and closer cooperation between universities and their business and industry partners.
This book presents a methodology for forecasting events and phenomena occurring in technology and natural environments. The methodology is based on forecasting the individual state of the control object, which is carried out based on the analysis of the trend behavior of the controlled parameter (symptom of the disease). The methodology helps determining the time of the onset of a destructive earthquake, its strength and the coordinates of the epicentre, predicting the time of the descent of glaciers and landslides long before the event. In medicine, the methodology predicts the severity of a disease and forecast of its aggravation.
"Developments in Computer-Integrated Manufacturing" arose from the joint work of members of the IFIP-Working Group 5.3 - Discrete Manufacturing, and other IFIP members. Within the Technical Committee 5 of the International Federation of Information Processing (lFIP) the aim of this Working Group is the advancement of computers and their application to the field of discrete part manufacturing. Capabilities will be expanded in the general areas of planning, selection, and con trol of manufacturing equipment and systems. Tools for problem solution include: mathematics, geometry, algorithms, computer techniques, and manufacturing technology. This technology will influence many industries - machine tool, auto mation, aircraft, appliance, and electronics, to name but a few. The Working Group undertook the following specific tasks: 1. To maintain liaison with other national and international organizations work ing in the same field, cooperating with them whenever desirable to further the common goal 2. To be responsible for the IFIP's work in organizing and presenting the PRO LAMA T Conferences 3. To conduct other working conferences and symposia as deemed appropriate in furthering its mission 4. To develop and sponsor research and industrial and social studies into the various aspects of its mission. The book can be regarded as an attempt to underline the main aspects of techno logy from the point of view of its software and hardware realization. Because of limitations in size and the availability of literature, the problems of robotics and quality control are not described in detail.
This book presents current developments in smart city research and application regarding the management of manufacturing systems, Industry 4.0, transportation, and business management. It suggests approaches to incorporating smart city innovations into manufacturing systems, with an eye towards competitiveness in a global environment. The same pro-innovative approach is then applied to business and cooperation management. The authors also present smart city transportation solutions including vehicle data processing/reporting system, mobile application for fleet managers, bus drivers, bus passengers and special applications for smart city buses like passenger counting system, IP cameras, GPS system etc. The goal of the book is to establish channels of communication and disseminate knowledge among researchers and professionals working on smart city research and application. Features contributions on a variety of topics related to smart cities from global researchers and professionals in a wide range of sectors; Presents topics relating to smart cities such as manufacturing, business, and transportation; Includes expanded selected papers from EAI International Conference on Management of Manufacturing Systems (MMS 2016), EAI Industry of Things and Future Technologies Conference – Mobility IoT 2016 and International Conference on Smart Electric Vehicles and Vehicular Ad-hoc NETworks (SEVNET).