Download Free On Monitoring And Diagnosing Classes Of Discrete Event Systems Book in PDF and EPUB Free Download. You can read online On Monitoring And Diagnosing Classes Of Discrete Event Systems and write the review.

Discrete Event Systems: Diagnosis and Diagnosability addresses the problem of fault diagnosis of Discrete Event Systems (DESs). This book provides the basic techniques and approaches necessary for the design of an efficient fault diagnosis system for a wide range of modern engineering applications. This book classifies the different techniques and approaches according to several criteria such as: modeling tools (Automata, Petri nets, Templates) that is used to construct the model; the information (qualitative based on events occurrences and/or states outputs, quantitative based on signal processing, data analysis) that is needed to analyze and achieve the diagnosis; the decision structure (centralized, decentralized) that is required to achieve the diagnosis; as well as the complexity (polynomial, exponential) of the algorithm that is used to determine the set of faults that the proposed approach is able to diagnose as well as the delay time required for this diagnosis. The goal of this classification is to select the efficient method to achieve the fault diagnosis according to the application constraints. This book will include illustrated examples of the presented methods and techniques as well as a discussion on the application of these methods on several real-world problems.
This book is about model-based diagnosis of a class of discrete-event systems called active systems. Roughly, model-based diagnosis is the task of finding out the faulty components of a physical system based on the observed behavior and the system model. An active system is the abstraction of a physical artefact that is modeled as a network of com municating automata. For example, the protection apparatus of a power transmission network can be conveniently modeled as an active system, where breakers, protection devices, and lines are naturally described by finite state machines. The asynchronous occurrence of a short circuit on a line or a bus-bar causes the reaction of the protection devices, which aims to isolate the shorted line. This reaction can be faulty and several lines might be eventually isolated, rather than the shorted line only. The diagnostic problem to be solved is uncovering the faulty devices based the visible part of the reaction. Once the diagnosis task has been on accomplished, the produced results are exploited to fix the apparatus (and also to localize the short circuit, in this sample case). Interestingly, the research presented in this book was triggered a decade ago by a project 011 short circuit localization, conducted by ENEL, the Italian electricity board, along with other industrial and academic European partners.
Includes subconference "Prestigious Applications of Intelligent Systems (PAIS 2008)."
The book presents a collection of peer-reviewed articles from the 11th KES International Conference on Intelligent Decision Technologies (KES-IDT-19), held Malta on 17–19 June 2019. The conference provided opportunities for the presentation of new research results and discussion about them. It was also an opportunity to generation of new ideas in the field of intelligent decision making. The range of topics explored is wide, and covers methods of classification, prediction, data analysis, decision support, modelling and many more in such areas as finance, cybersecurity, economy, health, management and transportation. The topics cover also problems of data science, signal processing and knowledge engineering.
This Proceedings contains the papers presented at the 14th International Conference on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2001), held in Manchester, UK, on 4-6 September 2001. COMADEM 2001 builds on the excellent reputation of previous conferences in this series, and is essential for anyone working in the field of condition monitoring and maintenance management.The scope of the conference is truly interdisciplinary. The Proceedings contains papers from six continents, written by experts in industry and academia the world over, bringing together the latest thoughts on topics including: Condition-based maintenance Reliability centred maintenance Asset management Industrial case studies Fault detection and diagnosis Prognostics Non-destructive evaluation Integrated diagnostics Vibration Oil and debris analysis Tribology Thermal techniques Risk assessment Structural health monitoring Sensor technology Advanced signal processing Neural networks Multivariate statistics Data compression and fusion This Proceedings also contains a wealth of industrial case studies, and the latest developments in education, training and certification. For more information on COMADEM's aims and scope, please visit http://www.comadem.com
Process Plant Operating Procedures presents an introduction to the theory and applications of procedure synthesis that is primarily concerned with the task of conjecturing the sequence of controller (or operator) actions needed to achieve designated operational goals in a given system. In order to facilitate practical implementation, the formal problem statement, two alternative approaches, their validation methods and a series of realistic examples are provided. The authors explore Petri nets and automata to identify the best paths leading to the specified goal of operation. The model-building methods for characterising all components in the given system, as well as the required control specifications, are explained with simple examples. The sequential control actions and the corresponding time schedule can then be identified accordingly. This book exposes practitioners to an important area of plant operations, teaching them effective approaches for procedure synthesis, enabling them to construct and solve scheduling models, and providing them with tools for simulation and validation of procedures and schedules. It is written for readers with a basic understanding of process design and control activities, and it will appeal to engineers in diverse fields with an interest in synthesizing operating procedures in process plants. Advances in Industrial Control reports and encourages the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.
In recent years, there has been growing interest in industrial systems, especially in robotic manipulators and mobile robot systems. As the cost of robots goes down and become more compact, the number of industrial applications of robotic systems increases. Moreover, there is need to design industrial systems with intelligence, autonomous decision making capabilities, and self-diagnosing properties. Intelligent Industrial Systems: Modeling, Automation and Adaptive Behavior analyzes current trends in industrial systems design, such as intelligent, industrial, and mobile robotics, complex electromechanical systems, fault diagnosis and avoidance of critical conditions, optimization, and adaptive behavior. This book discusses examples from major areas of research for engineers and researchers, providing an extensive background on robotics and industrial systems with intelligence, autonomy, and adaptive behavior giving emphasis to industrial systems design.
Approx. 484 pages
The productive operation of machines and facilities is of great economic importance for industrial companies. In order to achieve high productivity, unscheduled production downtimes induced by faults need to be minimized. In this work, an approach for modelbased fault diagnosis of timed concurrent Discrete Event Systems is proposed that can contribute to this aim. The models are automatically determined by timed identification and partitioning. These approaches allow for efficient modeling of large and complex industrial systems with concurrent behavior requiring only little system knowledge. The work explains the theoretical and practical aspects of the presented approaches and gives a detailed evaluation based on a laboratory manufacturing system.