Download Free Ohio Route 50 Joint Sealant Experiment Book in PDF and EPUB Free Download. You can read online Ohio Route 50 Joint Sealant Experiment and write the review.

This is the third and Final Report for a research project that entailed the construction and evaluation to date of a stretch of a four-lane highway near Athens, Ohio. The main purpose of this project has been to evaluate concrete pavement performance in connection with various sealant types and joint configurations in the Wet-Freeze climatic zone. A detailed description of previous work conducted from Fall 1996 to March 2000 can be found in Hawkins (1999) and in Sander (2002).
In Phase I, the research team contacted each of 16 participating states to gather information about concrete and concrete material tests. A preliminary suite of tests to ensure long-term pavement performance was developed. The tests were selected to provide useful and easy-to-interpret results that can be performed reasonably and routinely in terms of time, expertise, training, and cost. The tests examine concrete pavement properties in five focal areas critical to the long life and durability of concrete pavements: (1) workability, (2) strength development, (3) air system, (4) permeability, and (5) shrinkage. The tests were relevant at three stages in the concrete paving process: mix design, preconstruction verification, and construction quality control. In Phase II, the research team conducted field testing in each participating state to evaluate the preliminary suite of tests and demonstrate the testing technologies and procedures using local materials.
Worldwide, integral type bridges are being used in greater numbersin lieu of jointed bridges because of their structural simplicity,first-cost economy, and outstanding durability. In the UK and theUS states of Tennessee and Missouri, for example, the constructionof most moderate length bridges is based on the integral bridgeconcept. The state of Washington uses semi-integral bridges almostexclusively, while, depending on subfoundation characteristics, thestate of Ohio and others use a mix of these two bridge types. Integral and Semi-Integral Bridges has been written by apracticing bridge design engineer who has spent his entire careerinvolved in the origination, evaluation and design of such bridgesin the USA, where they have been in use since the late1930’s. This work shows how the analytical complexity due tothe elimination of movable joints can be minimized to negligiblelevels so that most moderate length bridges can be easily andquickly modified or replaced with either integral or semi-integralbridges. Bridge design, construction, and maintenance engineers; bridgedesign administrators; graduate level engineering students andstructural research professionals will all find this bookexceptionally informative for a wide range of highway bridgeapplications.