Eyren Ricardo Ponce Espejo
Published: 2012
Total Pages:
Get eBook
[CASTELLÀ] Teniendo en cuenta la importancia que posee la obtención de hidrógeno a partir de recursos ambientalmente sostenibles y especialmente renovables, la experimentación con diferentes catalizadores para el reformado por vapor de los principales componentes que conforman el bio-combustible procedente de la pirólisis rápida de biomasa se hace preponderante. En el presente estudio se determinó la eficacia de un catalizador de Cobalto como material activo a diferentes porcentajes (2%, 5% y 10%), sobre un soporte de CeO2, utilizando el método de precipitación por urea, para el reformado con vapor de acetona. Durante el proceso se realizaron reacciones a diferentes temperaturas en un rango comprendido entre 300 y 500oC, pruebas de carga incrementando los caudales de entrada desde 0,025 ml.min-1 hasta 0,2 ml.min-1, así como la variación de S/C (relación entre agua y acetona) de 1,66 a 7, con la finalidad de determinar el monolito catalítico idóneo, en el que se produce una mayor producción de hidrógeno y de forma estable. Finalmente se determinó la estabilidad del catalizador mediante una reacción continua en un periodo de tiempo de 28 horas. Los resultados obtenidos muestran que el catalizador con un porcentaje de peso de 10% de Co, mostró una mayor selectividad a hidrógeno que fluctuó entre 67-78%, un rendimiento de 97,6% y una producción de hidrógeno de 19,30 ml.min-1 dentro de los primeros 40 minutos de experimentación. Tanto la producción y el rendimiento de hidrógeno decrecieron hasta ubicarse por encima del 54% al finalizar la prueba de estabilidad pasado el periodo de 28 horas.