Download Free Network Processor Design Book in PDF and EPUB Free Download. You can read online Network Processor Design and write the review.

The past few years have seen significant change in the landscape of high-end network processing. In response to the formidable challenges facing this emerging field, the editors of this series set out to survey the latest research and practices in the design, programming, and use of network processors. Through chapters on hardware, software, performance and modeling, Volume 3 illustrates the potential for new NP applications, helping to lay a theoretical foundation for the architecture, evaluation, and programming of networking processors. Like Volume 2 of the series, Volume 3 further shifts the focus from achieving higher levels of packet processing performance to addressing other critical factors such as ease of programming, application developments, power, and performance prediction. In addition, Volume 3 emphasizes forward-looking, leading-edge research in the areas of architecture, tools and techniques, and applications such as high-speed intrusion detection and prevention system design, and the implementation of new interconnect standards. *Investigates current applications of network processor technology at Intel; Infineon Technologies; and NetModule. Presents current research in network processor design in three distinct areas: *Architecture at Washington University, St. Louis; Oregon Health and Science University; University of Georgia; and North Carolina State University. *Tools and Techniques at University of Texas, Austin; Academy of Sciences, China; University of Paderborn, Germany; and University of Massachusetts, Amherst. *Applications at University of California, Berkeley; Universidad Complutense de Madrid, Spain; ETH Zurich, Switzerland; Georgia Institute of Technology; Vrije Universiteit, the Netherlands; and Universiteit Leiden, the Netherlands.
Network System Design Using Network Processorsis the right book at the right time. Networking expert Douglas Comer divides this book into four major sections: a quick review of basics and packet header formats; Traditional Protocol Processing Systems; Network Processors - an independent overview of the technology, including motivation, economics, inherent complexities, and various examples of commercial architectures; and Intel's network processor. Network processor complexity is boiled down and simplified by allowing readers to see example code for a commercial processor, detailed explanations on the motivation and economics behind the technology, and a glossary for quick reference. The book's scope includes the concepts, principles, and hardware and software architectures that are the underpinnings of the design and implementation of network systems including routers, bridges, switches, intrusion detection systems, and firewalls - all independent of vendor specifics. An excellent fusion of network processing design principles, current architectures, and architectural directions, it is sure to become the standard text for this field the minute it hits the shelves.
Network processors are the basic building blocks of today's high-speed, high-demand, quality-oriented communication networks. Designing and implementing network processors requires a new programming paradigm and an in-depth understanding of network processing requirements. This book leads the reader through the requirements and the underlying theory of networks, network processing, and network processors. It covers implementation of network processors and intergrates EZchip Microcode Development Environment so that you can gain hands-on experience in writing high-speed networking applications. By the end of the book, the reader will be able to write and test applications on a simulated network processor. - Comprehensive, theoretical, and pracitical coverage of networks and high-speed networking applications - Descirbes contemporary core, metro, and access networks and their processing algorithms - Covers network processor architectures and programming models, enabling readers to assess the optimal network processor typer and configuration for their application - Free download from http://www.cse.bgu.ac.il/npbook includes microcode development tools that provide hands-on experience with programming a network processor
[2]. The Cell Processor from Sony, Toshiba and IBM (STI) [3], and the Sun UltraSPARC T1 (formerly codenamed Niagara) [4] signal the growing popularity of such systems. Furthermore, Intel’s very recently announced 80-core TeraFLOP chip [5] exemplifies the irreversible march toward many-core systems with tens or even hundreds of processing elements. 1.2 The Dawn of the Communication-Centric Revolution The multi-core thrust has ushered the gradual displacement of the computati- centric design model by a more communication-centric approach [6]. The large, sophisticated monolithic modules are giving way to several smaller, simpler p- cessing elements working in tandem. This trend has led to a surge in the popularity of multi-core systems, which typically manifest themselves in two distinct incarnations: heterogeneous Multi-Processor Systems-on-Chip (MPSoC) and homogeneous Chip Multi-Processors (CMP). The SoC philosophy revolves around the technique of Platform-Based Design (PBD) [7], which advocates the reuse of Intellectual Property (IP) cores in flexible design templates that can be customized accordingly to satisfy the demands of particular implementations. The appeal of such a modular approach lies in the substantially reduced Time-To- Market (TTM) incubation period, which is a direct outcome of lower circuit complexity and reduced design effort. The whole system can now be viewed as a diverse collection of pre-existing IP components integrated on a single die.
The past few years have seen significant change in the landscape of high-end network processing. In response to the formidable challenges facing this emerging field, the editors of this series set out to survey the latest research and practices in the design, programming, and use of network processors. Through chapters on hardware, software, performance and modeling, Network Processor Design illustrates the potential for new NP applications, helping to lay a theoretical foundation for the architecture, evaluation, and programming of networking processors. Like Volume 2 of the series, Volume 3 further shifts the focus from achieving higher levels of packet processing performance to addressing other critical factors such as ease of programming, application developments, power, and performance prediction. In addition, Volume 3 emphasizes forward-looking, leading-edge research in the areas of architecture, tools and techniques, and applications such as high-speed intrusion detection and prevention system design, and the implementation of new interconnect standards. - Investigates current applications of network processor technology at Intel; Infineon Technologies; and NetModule - Presents current research in network processor design in three distinct areas: - Architecture at Washington University, St. Louis; Oregon Health and Science University; University of Georgia; and North Carolina State University. - Tools and Techniques at University of Texas, Austin; Academy of Sciences, China; University of Paderborn, Germany; and University of Massachusetts, Amherst. - Applications at University of California, Berkeley; Universidad Complutense de Madrid, Spain; ETH Zurich, Switzerland; Georgia Institute of Technology; Vrije Universiteit, the Netherlands; and Universiteit Leiden, the Netherlands.
Networks-on-Chip: From Implementations to Programming Paradigms provides a thorough and bottom-up exploration of the whole NoC design space in a coherent and uniform fashion, from low-level router, buffer and topology implementations, to routing and flow control schemes, to co-optimizations of NoC and high-level programming paradigms. This textbook is intended for an advanced course on computer architecture, suitable for graduate students or senior undergrads who want to specialize in the area of computer architecture and Networks-on-Chip. It is also intended for practitioners in the industry in the area of microprocessor design, especially the many-core processor design with a network-on-chip. Graduates can learn many practical and theoretical lessons from this course, and also can be motivated to delve further into the ideas and designs proposed in this book. Industrial engineers can refer to this book to make practical tradeoffs as well. Graduates and engineers who focus on off-chip network design can also refer to this book to achieve deadlock-free routing algorithm designs. Provides thorough and insightful exploration of NoC design space. Description from low-level logic implementations to co-optimizations of high-level program paradigms and NoCs. The coherent and uniform format offers readers a clear, quick and efficient exploration of NoC design space Covers many novel and exciting research ideas, which encourage researchers to further delve into these topics. Presents both engineering and theoretical contributions. The detailed description of the router, buffer and topology implementations, comparisons and analysis are of high engineering value.
Architecture of Network Systems explains the practice and methodologies that will allow you to solve a broad range of problems in system design, including problems related to security, quality of service, performance, manageability, and more. Leading researchers Dimitrios Serpanos and Tilman Wolf develop architectures for all network sub-systems, bridging the gap between operation and VLSI.This book provides comprehensive coverage of the technical aspects of network systems, including system-on-chip technologies, embedded protocol processing and high-performance, and low-power design. It develops a functional approach to network system architecture based on the OSI reference model, which is useful for practitioners at every level. It also covers both fundamentals and the latest developments in network systems architecture, including network-on-chip, network processors, algorithms for lookup and classification, and network systems for the next-generation Internet.The book is recommended for practicing engineers designing the architecture of network systems and graduate students in computer engineering and computer science studying network system design. - This is the first book to provide comprehensive coverage of the technical aspects of network systems, including processing systems, hardware technologies, memory managers, software routers, and more - Develops a systematic approach to network architectures, based on the OSI reference model, that is useful for practitioners at every level - Covers both the important basics and cutting-edge topics in network systems architecture, including Quality of Service and Security for mobile, real-time P2P services, Low-Power Requirements for Mobile Systems, and next generation Internet systems
Going beyond isolated research ideas and design experiences, Designing Network On-Chip Architectures in the Nanoscale Era covers the foundations and design methods of network on-chip (NoC) technology. The contributors draw on their own lessons learned to provide strong practical guidance on various design issues.Exploring the design process of the
Here is an extremely useful book that provides insight into a number of different flavors of processor architectures and their design, software tool generation, implementation, and verification. After a brief introduction to processor architectures and how processor designers have sometimes failed to deliver what was expected, the authors introduce a generic flow for embedded on-chip processor design and start to explore the vast design space of on-chip processing. The authors cover a number of different types of processor core.
The new RISC-V Edition of Computer Organization and Design features the RISC-V open source instruction set architecture, the first open source architecture designed to be used in modern computing environments such as cloud computing, mobile devices, and other embedded systems. With the post-PC era now upon us, Computer Organization and Design moves forward to explore this generational change with examples, exercises, and material highlighting the emergence of mobile computing and the Cloud. Updated content featuring tablet computers, Cloud infrastructure, and the x86 (cloud computing) and ARM (mobile computing devices) architectures is included. An online companion Web site provides advanced content for further study, appendices, glossary, references, and recommended reading. - Features RISC-V, the first such architecture designed to be used in modern computing environments, such as cloud computing, mobile devices, and other embedded systems - Includes relevant examples, exercises, and material highlighting the emergence of mobile computing and the cloud