Download Free Municipal Solid Waste Landfill Technology In Japan Book in PDF and EPUB Free Download. You can read online Municipal Solid Waste Landfill Technology In Japan and write the review.

Japan was ahead of the rest of the world when it introduced intermediate processing of municipal waste by such means as incineration in the 1960s. Owing to the small land area of the country and the difficulty in securing landfill sites, the incineration ratio of municipal combustible waste had reached 100% by the 1990s. Along with the landfill of incineration residues, proprietary technologies such as high salt leachate treatment, desalination treatment, by-product recycling, a focus on the resource of incineration residues, sea surface landfill sites, and covered type landfill sites have spread and developed since then. This book describes the introduction of incineration facilities starting in the 1960s, landfill technology, and issues arising after 1990 following the introduction of the facilities. The necessity of a total system from incineration to landfill is explained as well. The volume is a valuable resource for countries that plan to introduce intermediate processing such as incineration and for countries that are developing a waste management policy.
Solid waste management issues, technologies and challenges are dynamic. More so, in developing and transitory nations in Asia. This book, written by Asian experts in solid waste management, explores the current situation in Asian countries including Pacific Islands. There are not many technical books of this kind, especially dedicated to this region of the world. The chapters form a comprehensive, coherent investigation in municipal solid waste (MSW) management, including, definitions used, generation, sustainable waste management system, legal framework and impacts on global warming. Several case studies from Asian nations are included to exemplify the real situation experienced. Discussions on MSW policy in these countries and their impacts on waste management and minimization (if any) are indeed an eye-opener. Undoubtedly, this book would be a pioneer in revealing the latest situation in the Asian region, which includes two of the world’s most dynamic nations in the economic growth. It is greatly envisaged to form an excellent source of reference in MSW management in Asia and Pacific Islands. This book will bridge the wide gap in available information between the developed and transitory/developing nations.
Industrial ecology (IE) is a rapidly growing scienti?c discipline that is concerned with the sustainability of industrial systems under explicit consideration of its int- dependence with natural systems. In recent years, there has been an ever-increasing awareness about the applicability of Input-Output Analysis (IOA) to IE, in particular to LCA (life cycle assessment) and MFA (material ?ow analysis). This is witnessed in the growing number of papers at ISIE (International Society for Industrial Ec- ogy) conferences, which use IOA, and also by the installment of subject editors on IOA in the International Journal of Life Cycle Assessment. It can be said that IE has become a major ?eld of application for IOA. The broadening of users of IOA from various backgrounds implies a need for a self-contained textbook on IOA that can meet the needs of students and practitioners without compromising on basic c- cepts and the latest developments. This book was written with the aim of ?lling this need, and is primarily addressed to students and practitioners of IE. As the title suggests, the core contents of the book have grown out of our research in IOA of waste management issues over the last decade. We have been fascinated by the versatile nature of IOA with regard to various technical issues of waste m- agement in particular, and to IE in general. For us (both economists by training), IOA has turned out to be extremely useful in establishing productive communi- tion with scientists and engineers interested in IE.
MUNICIPAL SOLID WASTE TO ENERGY CONVERSION PROCESSES A TECHNICAL AND ECONOMIC REVIEW OF EMERGING WASTE DISPOSAL TECHNOLOGIES Intended for a wide audience ranging from engineers and academics to decision-makers in both the public and private sectors, Municipal Solid Waste to Energy Conversion Processes: Economic, Technical, and Renewable Comparisons reviews the current state of the solid waste disposal industry. It details how the proven plasma gasification technology can be used to manage Municipal Solid Waste (MSW) and to generate energy and revenues for local communities in an environmentally safe manner with essentially no wastes. Beginning with an introduction to pyrolysis/gasification and combustion technologies, the book provides many case studies on various waste-to-energy (WTE) technologies and creates an economic and technical baseline from which all current and emerging WTE technologies could be compared and evaluated. Topics include: Pyrolysis/gasification technology, the most suitable and economically viable approach for the management of wastes Combustion technology Other renewable energy resources including wind and hydroelectric energy Plasma economics Cash flows as a revenue source for waste solids-to-energy management Plant operations, with an independent case study of Eco-Valley plant in Utashinai, Japan Extensive case studies of garbage to liquid fuels, wastes to electricity, and wastes to power ethanol plants illustrate how currently generated MSW and past wastes in landfills can be processed with proven plasma gasification technology to eliminate air and water pollution from landfills.
Solid waste management affects every person in the world. By 2050, the world is expected to increase waste generation by 70 percent, from 2.01 billion tonnes of waste in 2016 to 3.40 billion tonnes of waste annually. Individuals and governments make decisions about consumption and waste management that affect the daily health, productivity, and cleanliness of communities. Poorly managed waste is contaminating the world’s oceans, clogging drains and causing flooding, transmitting diseases, increasing respiratory problems, harming animals that consume waste unknowingly, and affecting economic development. Unmanaged and improperly managed waste from decades of economic growth requires urgent action at all levels of society. What a Waste 2.0: A Global Snapshot of Solid Waste Management to 2050 aggregates extensive solid aste data at the national and urban levels. It estimates and projects waste generation to 2030 and 2050. Beyond the core data metrics from waste generation to disposal, the report provides information on waste management costs, revenues, and tariffs; special wastes; regulations; public communication; administrative and operational models; and the informal sector. Solid waste management accounts for approximately 20 percent of municipal budgets in low-income countries and 10 percent of municipal budgets in middle-income countries, on average. Waste management is often under the jurisdiction of local authorities facing competing priorities and limited resources and capacities in planning, contract management, and operational monitoring. These factors make sustainable waste management a complicated proposition; most low- and middle-income countries, and their respective cities, are struggling to address these challenges. Waste management data are critical to creating policy and planning for local contexts. Understanding how much waste is generated—especially with rapid urbanization and population growth—as well as the types of waste generated helps local governments to select appropriate management methods and plan for future demand. It allows governments to design a system with a suitable number of vehicles, establish efficient routes, set targets for diversion of waste, track progress, and adapt as consumption patterns change. With accurate data, governments can realistically allocate resources, assess relevant technologies, and consider strategic partners for service provision, such as the private sector or nongovernmental organizations. What a Waste 2.0: A Global Snapshot of Solid Waste Management to 2050 provides the most up-to-date information available to empower citizens and governments around the world to effectively address the pressing global crisis of waste. Additional information is available at http://www.worldbank.org/what-a-waste.
Landfill Technology covers the selection, design, operation, and final reinstatement of landfill sites. This book is composed of seven chapters that also discuss the theory and practice of landfill technology. After briefly dealing with the composition of municipal and industrial wastes, this book goes on examining the hydrological aspect and site selection planning of a landfill site, including the economic and environmental impact assessments. These topics are followed by a chapter focusing on the several components of site preparation works, such as plant and machinery, methods of landfill operation, and waste disposal. Another chapter describes the involved microbiological processes, biodegradation, gas migration, and leachate production in landfill. Other chapters are devoted to the control and treatment of leachate pollution. These treatment options include aerobic and anaerobic, biological nitrification, ammonia desorption, and leachate recycling. The concluding chapter considers a wide range of afteruse and engineering problems occurring in landfill rehabilitation.
This book is for practising professionals and academics working in urban planning and international development: international project staff, trainers, urban development researchers and teaching staff in universities and polytechnics. Solid Waste Management and Recycling is unique in that it: -utilizes an 'integrated solid waste management perspective' in its analysis; -provides embedded case study data; -deals with both formal and informal actors and institutional arrangements in solid waste management and recycling; -has chapters written by experts from the countries concerned (Kenya and India); -can be used in graduate-level courses in urban development, urban management and planning, and technical engineering courses for students, project staff, and technical students.
This volume provides a perspective on how different countries cope with the municipal solid waste problem politically, administratively, and technically--with a particular focus on sanitary landfilling. Fifteen countries report on the quantities of such waste generated, its composition, and on various management methods used. In addition they report on sanitary landfilling, the impacts of past practices, current practices for leachate control, and landfill gas management. Finally, the role of government, new handling strategies, and likely future directions in waste management are discussed.
The issue of overflowing landfills and environmental degradation caused by municipal solid waste is becoming increasingly pressing. Despite the importance of recycling, challenges such as contamination and the need for market demand for recycled materials persist. Addressing these challenges requires a comprehensive understanding of waste composition, innovative technologies, and effective policies. Municipal Solid Waste Management and Recycling Technologies serves as a solution, offering a deep dive into the complexities of municipal solid waste recycling and providing insights that can drive sustainable waste management practices. By delving into topics such as the role of education and awareness campaigns, technological advancements in waste sorting, and the economic aspects of recycling, this book equips readers with the knowledge needed to make a meaningful impact. It explores innovative recycling technologies, social and environmental implications, successful case studies, and strategies for reducing contamination in recycling processes. The book also highlights the importance of collaboration among researchers, policymakers, and stakeholders to implement effective waste management systems.
The collection, transportation and subsequent processing of waste materials is a vast field of study which incorporates technical, social, legal, economic, environmental and regulatory issues. Common waste management practices include landfilling, biological treatment, incineration, and recycling – all boasting advantages and disadvantages. Waste management has changed significantly over the past ten years, with an increased focus on integrated waste management and life-cycle assessment (LCA), with the aim of reducing the reliance on landfill with its obvious environmental concerns in favour of greener solutions. With contributions from more than seventy internationally known experts presented in two volumes and backed by the International Waste Working Group and the International Solid Waste Association, detailed chapters cover: Waste Generation and Characterization Life Cycle Assessment of Waste Management Systems Waste Minimization Material Recycling Waste Collection Mechanical Treatment and Separation Thermal Treatment Biological Treatment Landfilling Special and Hazardous Waste Solid Waste Technology & Management is a balanced and detailed account of all aspects of municipal solid waste management, treatment and disposal, covering both engineering and management aspects with an overarching emphasis on the life-cycle approach.