Download Free Mujumdars Practical Guide To Industrial Drying Book in PDF and EPUB Free Download. You can read online Mujumdars Practical Guide To Industrial Drying and write the review.

By far the most commonly encountered and energy-intensive unit operation in almost all industrial sectors, industrial drying continues to attract the interest of scientists, researchers, and engineers. The Handbook of Industrial Drying, Fourth Edition not only delivers a comprehensive treatment of the current state of the art, but also serves as a consultative reference for streamlining industrial drying operations. New to the Fourth Edition: Computational fluid dynamic simulation Solar, impingement, and pulse combustion drying Drying of fruits, vegetables, sugar, biomass, and coal Physicochemical aspects of sludge drying Life-cycle assessment of drying systems Covering commonly encountered dryers as well as innovative dryers with future potential, the Handbook of Industrial Drying, Fourth Edition not only details the latest developments in the field, but also explains how improvements in dryer design and operation can increase energy efficiency and cost-effectiveness.
Still the Most Complete, Up-To-Date, and Reliable Reference in the FieldDrying is a highly energy-intensive operation and is encountered in nearly all industrial sectors. With rising energy costs and consumer demands for higher quality dried products, it is increasingly important to be aware of the latest developments in industrial drying technolog
This book discusses conventional as well as unconventional wood drying technologies. It covers fundamental thermophysical and energetic aspects and integrates two complex thermodynamic systems, conventional kilns and heat pumps, aimed at improving the energy performance of dryers and the final quality of dried lumber. It discusses advanced components, kiln energy requirements, modeling, and software and emphasizes dryer/heat pump optimum coupling, control, and energy efficiency. Problems are included in most chapters as practical, numerical examples for process and system/components calculation and design. The book presents promising advancements and R&D challenges and future requirements.
A Real- Time Approach to Process Control provides the reader with both a theoretical and practical introduction to this increasingly important approach. Assuming no prior knowledge of the subject, this text introduces all of the applied fundamentals of process control from instrumentation to process dynamics, PID loops and tuning, to distillation, multi-loop and plant-wide control. In addition, readers come away with a working knowledge of the three most popular dynamic simulation packages. The text carefully balances theory and practice by offering readings and lecture materials along with hands-on workshops that provide a 'virtual' process on which to experiment and from which to learn modern, real time control strategy development. As well as a general updating of the book specific changes include: A new section on boiler control in the chapter on common control loops A major rewrite of the chapters on distillation column control and multiple single-loop control schemes The addition of new figures throughout the text Workshop instructions will be altered to suit the latest versions of HYSYS, ASPEN and DYNSIM simulation software A new solutions manual for the workshop problems
This book discusses chemical engineering and processing, presenting selected contributions from PAIC 2019. It covers interdisciplinary technologies and sciences, like drug-delivery systems, nanoscale technology, environmental control, modelling and computational methods. The book also explores interdisciplinary aspects of chemical and biochemical engineering interconnected with process system engineering, process safety and computer science.
Food materials are processed prior to their consumption using different processing technologies that improve their shelf life and maintain their physicochemical, biological, and sensory qualities. Introduction to Advanced Food Process Engineering provides a general reference on various aspects of processing, packaging, storage, and quality control and assessment systems, describing the basic principles and major applications of emerging food processing technologies. The book is divided into three sections, systematically examining processes from different areas of food process engineering. Section I covers a wide range of advanced food processing technologies including osmo-concentration of fruits and vegetables, membrane technology, nonthermal processing, emerging drying technologies, CA and MA storage of fruits and vegetables, nanotechnology in food processing, and computational fluid dynamics modeling in food processing. Section II describes food safety and various non-destructive quality assessment systems using machine vision systems, vibrational spectroscopy, biosensors, and chemosensors. Section III explores waste management, by-product utilization, and energy conservation in food processing industry. With an emphasis on novel food processes, each chapter contains case studies and examples to illustrate state-of-the-art applications of the technologies discussed.
Presents Drying Breakthroughs for an Array of MaterialsDespite being one of the oldest, most energy-intensive unit operations, industrial drying is perhaps the least scrutinized technique at the microscopic level. Yet in the wake of today's global energy crisis, drying research and development is on the rise. Following in the footsteps of the widel
Drying is by far the most useful large scale operation method of keeping solid foods safe for long periods of time, and is of fundamental importance in most sectors of food processing. Drying operations need to be precisely controlled and optimized in order to produce a good quality product that has the highest level of nutrient retention and flavor whilst maintaining microbial safety. This volume provides an up to date account of all the major drying technologies employed in the food industry and their underlying scientific principles and effects. Various equipment designs are classified and described. The impact of drying on food properties is covered, and the micro-structural changes caused by the process are examined, highlighting their usefulness in process analysis and food design. Key methods for assessing food properties of dried products are described, and pre-concentration and drying control strategies are reviewed. Thermal hazards and fire/explosion detection and prevention for dryers are discussed in a dedicated chapter. Where appropriate, sample calculations are included for engineers and technologists to follow. The book is directed at food scientists and technologists in industry and research, food engineers and drying equipment manufacturers.
The incorporation of functional ingredients in a given food system and the processing and handling of such foods are associated with nutritional challenges for their healthy delivery. The extreme sensitivity of some components cause significant loss of product quality, stability, nutritional value and bioavailability, and the overall acceptability of the food product. Consequently, encapsulation has been successfully used to improve stability and bioavailability of functional ingredients. Encapsulation is one example of technology that has the potential to meet the challenge of successfully incorporating and delivering functional ingredients into a range of food types. The book will cover topics about 1) Characterization of novel polymers and their use in encapsulation processes. 2) Stability of nutraceutical compounds encapsulated with novel polymers. 3) Application of encapsulated compounds with novel polymers in functional food systems. This book provides a detailed overview of technologies for preparing and characterisation of encapsulates for food active ingredients using modified polymers. The use of modified polymers as coating materials it is a field that still needs study. The book is aimed to inform students and researchers in the areas of food science and food technology, and professionals in the food industry.