Download Free Modeling Of Hot Mix Asphalt Compaction Book in PDF and EPUB Free Download. You can read online Modeling Of Hot Mix Asphalt Compaction and write the review.

Compaction is the process of reducing the volume of hot-mix asphalt (HMA) by the application of external forces. As a result of compaction, the volume of air voids decreases, aggregate interlock increases, and interparticle friction increases. The quality of field compaction of HMA is one of the most important elements influencing asphalt pavement performance. Poor compaction has been associated with asphalt bleeding in hot weather, moisture damage, excessive aging and associated cracking, and premature permanent deformation. This study was conducted to develop a model within the context of a thermomechanical framework for the compaction of asphalt mixtures. The asphalt mixture was modeled as a nonlinear compressible material exhibiting time-dependent properties. A numerical scheme based on finite elements was employed to solve the equations governing compaction mechanisms. The material model was implemented in the Computer Aided Pavement Analysis (CAPA-3D) finite-element (FE) package. Due to the difficulty of conducting tests on the mixture at the compaction temperature, a procedure was developed to determine the model's parameters from the analysis of the Superpave® gyratory compaction curves. A number of mixtures were compacted in the Superpave® gyratory compactor using an angle of 1.25 degrees in order to determine the model's parameters. Consequently, the model was used to predict the compaction curves of mixtures compacted using a 2-degree angle of gyration. The model compared reasonably well with the compaction curves. FE simulations of the compaction of several pavement sections were conducted in this study. The results demonstrated the potential of the material model to represent asphalt mixture field compaction. The developed model is a useful tool for simulating the compaction of asphalt mixtures under laboratory and field conditions. In addition, it can be used to determine the influence of various material properties and mixture designs on the model's parameters and mixture compactability.
Modeling of hot-mix asphalt compaction : a thermodynamics-based compressible viscoelastic model /
Hot mix asphalt (HMA) is a composite material that exhibits a nonlinear response that is dependent on temperature, type of loading and strain level. The properties of HMA are highly influenced by the type and amount of the constituents used and also depend on its internal structure. In such a material the variable effects of the compaction process assume a central importance in determining material performance. It is generally accepted that the theoretical knowledge about material behavior during compaction is limited and it is therefore hard to predict and manage (the effect of) a compaction process. This work makes an attempt to address such a specific need by developing a continuum model that can be adapted for simulating the compaction of hot mix asphalt (HMA) using the notion of multiple natural configurations. A thermodynamic framework is employed to study the non-linear dissipative response associated with HMA by specifying the forms for the stored energy and the rate of dissipation function for the material; a viscoelastic compressible fluid model is developed using this framework to model the compaction of hot mix asphalt. It is further anticipated that the present work will aid in the development of better constitutive models capable of capturing the mechanics of processes like compaction both in the laboratory and in the field. The continuum model developed was implemented in the finite element method, which was employed to setup a simulation environment for hot mix asphalt compaction. The finite element method was used for simulating compaction in the laboratory and in various field compaction projects.
Asphalt mixture compaction is an important procedure of asphalt mixture construction and can significantly affect the performance of asphalt pavement. Many laboratory compaction methods (or devices), have been developed to study the asphalt mixture compaction. Nevertheless, the whole process from the selection of aggregate to laboratory compaction is still time-consuming and requires significant human and material resources. In order to better understand asphalt mixture compaction, some researchers began to use finite element method (FEM) to study and analyze mixture compaction. However, FEM is a continuum approach and lacks the ability to take into account the slippage and interlocking of aggregates during compaction. Discrete Element Method (DEM) is a discontinuum analysis method, which can simulate the deformation process of joint systems or discrete particle assembly under quasi-static and dynamic condition. Therefore, it can overcome the shortcomings of FEM and is a more effective tool than FEM to simulate asphalt mixture compaction. In this study, an open source 3D DEM code implemented with the C++ programming language was modified and applied to simulate the compaction of hot-mix asphalt (HMA). A viscoelastic contact model was developed in the DEM code and was verified through comparison with well established analytical solutions. The input parameters of the newly developed contact model were obtained through nonlinear regression analysis of dynamic modulus test results. Two commonly used compaction methods (Superpave gyratory compaction and asphalt vibratory compaction) and one linear kneading compaction based on APA machine were simulated using the DEM code, and the DEM compaction models were verified through the comparison between the DEM predicted results and the laboratory measured test results. The air voids distribution within the asphalt specimens was also analyzed by post processing virtual DEM compaction digital specimens and the level of heterogeneity of the air void distribution within the specimens in the vertical and lateral directions was studied. The DEM simulation results in this study were in a relatively good agreement with the experimental data and previous research results, which demonstrates that the DEM is a feasible method to simulate asphalt mixture compaction under different loading conditions and, with further research, it could be a potentially helpful tool for asphalt mix design by reducing the number of physical compactions in the laboratory.
This textbook lays out the state of the art for modeling of asphalt concrete as the major structural component of flexible pavements. The text adopts a pedagogy in which a scientific approach, based on materials science and continuum mechanics, predicts the performance of any configuration of flexible roadways subjected to cyclic loadings. The authors incorporate state-of the-art computational mechanics to predict the evolution of material properties, stresses and strains, and roadway deterioration. Designed specifically for both students and practitioners, the book presents fundamentally complex concepts in a clear and concise way that aids the roadway design community to assimilate the tools for designing sustainable roadways using both traditional and innovative technologies.
Hot mix asphalt (HMA) is a granular composite material stabilized by the presence of asphalt binder. The behavior of HMA is highly influenced by the microstructure distribution in terms of the different particle sizes present in the mix, the directional distribution of particles, the distribution of voids, and the nucleation and propagation of cracks. Conventional continuum modeling of HMA lacks the ability to explicitly account for the effect of microstructure distribution features. This study presents the development of elastic and visco-plastic models that account for important aspects of the microstructure distribution in modeling the macroscopic behavior of HMA. In the first part of this study, an approach is developed to introduce a length scale to the elasticity constitutive relationship in order to capture the influence of particle sizes on HMA response. The model is implemented in finite element (FE) analysis and used to analyze the microstructure response and predict the macroscopic properties of HMA. Each point in the microstructure is assigned effective local properties which are calculated using an analytical micromechanical model that captures the influence of percent of particles on the microscopic response of HMA. The moving window technique and autocorrelation function are used to determine the microstructure characteristic length scales that are used in strain gradient elasticity. A number of asphalt mixes with different aggregate types and size distributions are analyzed in this paper. In the second part of this study, an elasto-visco-plastic continuum model is developed to predict HMA response and performance. The model incorporates a Drucker-Prager yield surface that is modified to capture the influence of stress path direction on the material response. Parameters that reflect the directional distribution of aggregates and damage density in the microstructure are included in the model. The elasto-visco-plastic model is converted into a numerical formulation and is implemented in FE analysis using a user-defined material subroutine (UMAT). A fully implicit algorithm in time-step control is used to enhance the efficiency of the FE analysis. The FE model used in this study simulates experimental data and pavement section.
This book summarizes research being pursued within the Research Unit FOR 2089, funded by the German Research Foundation (DFG), the goal of which is to develop the scientific base for a paradigm shift towards dimensioning, structural realization and maintenance of pavements, and prepare road infrastructure for future requirements. It provides a coupled thermo-mechanical model for a holistic physical analysis of the pavement-tire-vehicle system: based on this model, pavement structures and materials can be optimized so that new demands become compatible with the main goal – durability of the structures and the materials. The development of these new and qualitatively improved modelling approaches requires a holistic procedure through the coupling of theoretical numerical and experimental approaches as well as an interdisciplinary and closely linked handling of the coupled pavement-tire-vehicle system. This interdisciplinary research provides a deeper understanding of the physics of the full system through complex, coupled simulation approaches and progress in terms of improved and, therefore, more durable and sustainable structures.