Download Free Mechanical Properties And Recrystallization Behavior Of Electron Beam Melted Tungsten Compared With Arc Melted Tungsten Book in PDF and EPUB Free Download. You can read online Mechanical Properties And Recrystallization Behavior Of Electron Beam Melted Tungsten Compared With Arc Melted Tungsten and write the review.

A study has been conducted of the properties of tungsten fabricated from three ingots consolidated by electron-beam melting. The study included purity as a function of number of melts, recrystallization a d grain growth behavior, low-temperature ductility, and high-temperature tensile and creep strength. The level of most metallic impurities in tungsten decreased with increasing number of electron-beam melts, the reduction being greatest for aluminum, iron, nickel, and silicon. The levels of interstitial impurities generally were not affected by remelting. Resistivity ratios for single crystals machined from ingot slices tended to increase on remelting. The recrystallization rates for worked, electron-beam- melted (EB-melted) tungsten were significantly higher than those observed earlier for arc-melted tungsten. The grain growth rates of EB-melted tungsten were higher than those reported previously for arc-melted tungsten, further reflecting the higher purity of the EB-melted materials. The activation energies for both recrystallization and grain growth in EB-melted tungsten were consistent with expected values assuming grain boundary self-diffusion to be the rate-controlling reaction. The ductile-brittle bend transition temperature for EB-melted tungsten is slightly higher in the worked condition than that reported for arc-melted tungsten. In the recrystallized conditions, the transition temperatures for EB- and arc-melted tungsten are similar. The tensile strength of EB-melted tungsten at 2500 to 4000 F is less than that of arc-melted tungsten. This is partly associated with the large grain size of EB-melted tungsten. However, when compared at the same grain size,
This exhaustive work in three volumes with featuring cross-reference system provides a thorough overview of ultra-high temperature materials – from elements and chemical compounds to alloys and composites. Topics included are physical (crystallographic, thermodynamic, thermo-physical, electrical, optical, physico-mechanical, nuclear) and chemical (solid-state diffusion, interaction with chemical elements and compounds, interaction with gases, vapours and aqueous solutions) properties of the individual physico-chemical phases and multi-phase materials with melting (or sublimation) points over or about 2500 °C. The first volume focuses on carbon (graphite/graphene) and refractory metals (W, Re, Os, Ta, Mo, Nb, Ir). The second and third volumes are dedicated solely to refractory (ceramic) compounds (oxides, nitrides, carbides, borides, silicides) and to the complex materials – refractory alloys, carbon and ceramic composites, respectively. It will be of interest to researchers, engineers, postgraduate, graduate and undergraduate students in various disciplines alike. The reader is provided with the full qualitative and quantitative assessment for the materials, which could be applied in various engineering devices and environmental conditions at ultra-high temperatures, on the basis of the latest updates in the field of physics, chemistry, materials science, nanotechnology and engineering.