Download Free Localization And Posture Recognition Via Magneto Inductive And Relay Aided Sensor Networks Book in PDF and EPUB Free Download. You can read online Localization And Posture Recognition Via Magneto Inductive And Relay Aided Sensor Networks and write the review.

Body-centric wireless sensor networks are expected to enable future technologies such as medical in-body micro robots or unobtrusive smart textiles. These technologies may advance personalized healthcare as they allow for tasks such as minimally invasive surgery, in-body diagnosis, and continuous activity recognition. However, the localization of individual sensor nodes within such networks or the determination of the entire network topology still pose challenges that need to be solved. This work provides both theoretic and simulative insights to enable the required sub-millimeter localization accuracy of such sensors using magneto-inductive networks. It identifies inherent localization issues such as the asymmetry of the position estimation in magneto-inductive networks and outlines how such issues may be addressed by using passive relays or cooperation. It further proposes a novel approach to recognize the entire structure of a magneto-inductive network using simple impedance measurements and clusters of passive tags. This approach is evaluated extensively by simulation and experiment to demonstrate the feasibility of low-cost human body posture recognition.
In our increasingly interconnected world, personalized and technology-assisted healthcare has become a rising trend. In an ageing society, technology enables new ways to care for and assist the elderly. Falls pose a major risk and cause of injuries for senior citizens. Technology-backed fall prevention thus has the potential to avoid severe injuries and further loss of independence, but requires continuous monitoring of the body posture in order to identify imminent falls. This work presents a system concept for a wearable wireless body area network (WBAN) for posture monitoring. It shows the principal feasibility of posture recognition from ultra-wideband (UWB) signals based on a large and diverse set of measurements. For a promising classifier-feature-combination, this work demonstrates how reliable posture recognition can be achieved with a limited number of body-mounted nodes, and analyzes its robustness towards potential pitfalls. It concludes with a proposal for a system implementation, and outlines its integration with existing and future aspects of personalized healthcare.
The advances in low-power electronic devices integrated with wireless communication capabilities are one of recent areas of research in the field of Wireless Sensor Networks (WSNs). One of the major challenges in WSNs is uniform and least energy dissipation while increasing the lifetime of the network. This is the first book that introduces the energy efficient wireless sensor network techniques and protocols. The text covers the theoretical as well as the practical requirements to conduct and trigger new experiments and project ideas. The advanced techniques will help in industrial problem solving for energy-hungry wireless sensor network applications.
This is the first textbook on pattern recognition to present the Bayesian viewpoint. The book presents approximate inference algorithms that permit fast approximate answers in situations where exact answers are not feasible. It uses graphical models to describe probability distributions when no other books apply graphical models to machine learning. No previous knowledge of pattern recognition or machine learning concepts is assumed. Familiarity with multivariate calculus and basic linear algebra is required, and some experience in the use of probabilities would be helpful though not essential as the book includes a self-contained introduction to basic probability theory.
Seven years have passed since the publication of the previous edition of this book. During that time, sensor technologies have made a remarkable leap forward. The sensitivity of the sensors became higher, the dimensions became smaller, the sel- tivity became better, and the prices became lower. What have not changed are the fundamental principles of the sensor design. They are still governed by the laws of Nature. Arguably one of the greatest geniuses who ever lived, Leonardo Da Vinci, had his own peculiar way of praying. He was saying, “Oh Lord, thanks for Thou do not violate your own laws. ” It is comforting indeed that the laws of Nature do not change as time goes by; it is just our appreciation of them that is being re?ned. Thus, this new edition examines the same good old laws of Nature that are employed in the designs of various sensors. This has not changed much since the previous edition. Yet, the sections that describe the practical designs are revised substantially. Recent ideas and developments have been added, and less important and nonessential designs were dropped. Probably the most dramatic recent progress in the sensor technologies relates to wide use of MEMS and MEOMS (micro-electro-mechanical systems and micro-electro-opto-mechanical systems). These are examined in this new edition with greater detail. This book is about devices commonly called sensors. The invention of a - croprocessor has brought highly sophisticated instruments into our everyday lives.
For the 119 species of marine mammals, as well as for some other aquatic animals, sound is the primary means of learning about the environment and of communicating, navigating, and foraging. The possibility that human-generated noise could harm marine mammals or significantly interfere with their normal activities is an issue of increasing concern. Noise and its potential impacts have been regulated since the passage of the Marine Mammal Protection Act of 1972. Public awareness of the issue escalated in 1990s when researchers began using high-intensity sound to measure ocean climate changes. More recently, the stranding of beaked whales in proximity to Navy sonar use has again put the issue in the spotlight. Ocean Noise and Marine Mammals reviews sources of noise in the ocean environment, what is known of the responses of marine mammals to acoustic disturbance, and what models exist for describing ocean noise and marine mammal responses. Recommendations are made for future data gathering efforts, studies of marine mammal behavior and physiology, and modeling efforts necessary to determine what the long- and short-term impacts of ocean noise on marine mammals.
This book provides an in-depth coverage of the most recent developments in the field of wireless underground communications, from both theoretical and practical perspectives. The authors identify technical challenges and discuss recent results related to improvements in wireless underground communications and soil sensing in Internet of Underground Things (IOUT). The book covers both existing network technologies and those currently in development in three major areas of SitS: wireless underground communications, subsurface sensing, and antennas in the soil medium. The authors explore novel applications of Internet of Underground Things in digital agriculture and autonomous irrigation management domains. The book is relevant to wireless researchers, academics, students, and decision agriculture professionals. The contents of the book are arranged in a comprehensive and easily accessible format. Focuses on fundamental issues of wireless underground communication and subsurface sensing; Includes advanced treatment of IOUT custom applications of variable-rate technologies in the field of decision agriculture, and covers protocol design and wireless underground channel modeling; Provides a detailed set of path loss, antenna, and wireless underground channel measurements in various novel Signals in the Soil (SitS) testbed settings.
The book presents the recent advancements in the area of sensors and sensing technology, specifically in environmental monitoring, structural health monitoring, dielectric, magnetic, electrochemical, ultrasonic, microfluidic, flow, surface acoustic wave, gas, cloud computing and bio-medical. This book will be useful to a variety of readers, namely, Master and PhD degree students, researchers, practitioners, working on sensors and sensing technology. The book will provide an opportunity of a dedicated and a deep approach in order to improve their knowledge in this specific field.
Here is unique and comprehensive coverage of modern seismic instrumentation, based on the authors’ practical experience of a quarter-century in seismology and geophysics. Their goal is to provide not only detailed information on the basics of seismic instruments but also to survey equipment on the market, blending this with only the amount of theory needed to understand the basic principles. Seismologists and technicians working with seismological instruments will find here the answers to their practical problems. Instrumentation in Earthquake Seismology is written to be understandable to the broad range of professionals working with seismological instruments and seismic data, whether students, engineers or seismologists. Whether installing seismic stations, networks and arrays, working and calibrating stationary or portable instruments, dealing with response information, or teaching about seismic instruments, professionals and academics now have a practical and authoritative sourcebook. Includes: SEISAN and SEISLOG software systems that are available from http://extras.springer.com and http://www.geo.uib.no/seismo/software/software.html
Wireless communication has emerged as an independent discipline in the past decades. Everything from cellular voice telephony to wireless data transmission using wireless sensor networks has profoundly impacted the safety, production, and productivity of industries and our lifestyle as well. After a decade of exponential growth, the wireless industry is one of the largest industries in the world. Therefore, it would be an injustice if the wireless communication is not explored for mining industry. Underground mines, which are characterized by their tough working conditions and hazardous environments, require fool-proof mine-wide communication systems for smooth functioning of mine workings and ensuring better safety. Proper and re- able communication systems not only save the machine breakdown time but also help in immediate passing of messages from the vicinity of underground working area to the surface for day-to-day normal mining operations as well as for speedy rescue operations in case of disaster. Therefore, a reliable and effective commu- cation system is an essential requisite for safe working, and maintaining requisite production and productivity of underground mines. Most of the existing systems generally available in underground mines are based on line (wired) communication principle, hence these are unable to withstand in the disaster conditions and dif?cult to deploy in inaccessible places. Therefore, wireless communication is an indispe- able, reliable, and convenient system and essential in case of day-to-day normal duty or disaster situations.