Download Free Laser Transit Anemometer Measurements On A Slender Cone In The Langley Unitary Plan Wind Tunnel Book in PDF and EPUB Free Download. You can read online Laser Transit Anemometer Measurements On A Slender Cone In The Langley Unitary Plan Wind Tunnel and write the review.

A laser transit anemometer (LTA) system was used to probe the boundary layer on a slender (5 degree half angle) cone model in the Langley unitary plan wind tunnel. The anemometer system utilized a pair of laser beams with a diameter of 40 micrometers spaced 1230 micrometers apart to measure the transit times of ensembles of seeding particles using a cross-correlation technique. From these measurements, boundary layer profiles around the model were constructed and compared with CFD calculations. The measured boundary layer profiles representing the boundary layer velocity normalized to the edge velocity as a function of height above the model surface were collected with the model at zero angle of attack for four different flow conditions, and were collected in a vertical plane that bisected the model's longitudinal center line at a location 635 mm from the tip of the forebody cone. The results indicate an excellent ability of the LTA system to make velocity measurements deep into the boundary layer. However, because of disturbances in the flow field caused by onboard seeding, premature transition occurred implying that upstream seeding is mandatory if model flow field integrity is to be maintained. A description and results of the flow field surveys are presented. Humphreys, William M., Jr. and Hunter, William W., Jr. and Covell, Peter F. and Nichols, Cecil E., Jr. Langley Research Center RTOP 763-01-31-26
Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Because of the growing interest in hypersonic flows, the AGARD Fluid Dynamics Panel initiated a sub-working group on instrumentation for hypersonics in 1989. This sub-group, chaired by J. WENDT (VKI -Belgium), was composed of: A. BOUTIER (ONERA -France), K. BUTEFISCH (DLR -Germany), R. CATTOLICA (SANDIA Lab. -USA), V. CLINE (AEDC -USA), A. GIRARD (ONERA -France), R. McKENZIE (NASA Ames -USA), S. OCHELTREE (NASA Langley -USA) and G. SMEETS (ISL -Franco-German Inst.). As a result of several meetings, the idea came to organize this workshop, 27th April - 1st May 1992, on "New Trends in Instrumentation for Hypersonic Research", at Le Fauga-Mauzac ONERA center, in France, where the new hot-shot arc-heated facility F4, as well as a new conference building, were recently completed. This workshop has been organized in close connection with the AGARD FDP Symposium to be held in Torino 4 - 8 May 1992 on "Theoretical and Experimental Methods in Hypersonic Flows": the main conclusions and ideas expressed by the papers and during the discussions of this workshop are reported in session 7 and have been presented in Torino in a special Instrumentation session. As chairman of this workshop, I express many thanks to the Organizing Committee composed of Karl BUTEFISCH, Andre GIRARD, Stewart OCHELTREE and John WENDT for their very constructive help, leading to a meeting that was recognized to be very fruitful for all the participants.