Download Free Large Eddy Simulation Of Gas Turbine Combustors Using Flamelet Manifold Methods Book in PDF and EPUB Free Download. You can read online Large Eddy Simulation Of Gas Turbine Combustors Using Flamelet Manifold Methods and write the review.

The main objective of this work was to develop a large-eddy simulation (LES) based computational tool for application to both premixed and non- premixed combustion of low-Mach number flows in gas turbines. In the recent past, LES methodology has emerged as a viable tool for modeling turbulent combustion. LES is particularly well-suited for the compu- tation of large scale mixing, which provides a firm starting point for the small scale models which describe the reaction processes. Even models developed in the context of Reynolds averaged Navier-Stokes (RANS) exhibit superior results in the LES framework. Although LES is a widespread topic of research, in industrial applications it is often seen as a less attractive option than RANS, which is computationally inexpensive and often returns sufficiently accurate results. However, there are many commonly encountered problems for which RANS is unsuitable. This work is geared towards such instances, with a solver developed for use in unsteady reacting flows on unstructured grids. The work is divided into two sections. First, a robust CFD solver for a generalized incompressible, reacting flow configuration is developed. The computational algorithm, which com- bines elements of the low-Mach number approximation and pressure projection methods with other techniques, is described. Coupled to the flow solver is a combustion model based on the flamelet progress variable approach (FPVA), adapted to current applications. Modifications which promote stability and accuracy in the context of unstructured meshes are also implemented. Second, the LES methodology is used to study three specific problems. The first is a channel geometry with a lean premixed hydrogen mixture, in which the unsteady flashback phenomenon is induced. DNS run in tandem is used for establishing the validity of the LES. The second problem is a swirling gas turbine combustor, which extends the channel flashback study to a more practical application with stratified premixed methane and hydrogen/methane mixtures. Experimental results are used for comparison. Finally, the third problem tests the solver's abilities further, using a more complex fuel JP-8, Lagrangian fuel droplets, and a complicated geometry. In this last configu- ration, experimental results validate early simulations while later simulations examine the physics of reacting sprays under high centripetal loading.
The paper presents applications of the large eddy simulation (LES) methodology on the Sandia/Sydney turbulent bluf)body burner and gas turbine combustors. LES of the bluffbody flame is performed using the filtered density function (FDF) submodel and a comprehensive augmented chemical mechanism for the first time. The FDF submodel is a sophisticated turbulent-combustion submodel that directly computes the joint probability density function (PDF) of scalars and is therefore considered to be more accurate than conventional assumed-PDF type models. The chemical kinetics mechanism involves 19 species and 15 reaction-steps. The mechanism contains both C1 and C2 species and also involves NO formation steps. Owing to the complexity of the mechanism, numerical integration of the kinetics equations is peiformed using the in situ adaptive tabulation (ISAT) scheme. Mean velocity and species/temperature fields are presented and compared to experimental data. Results show that the computations are in good agreement with data. The paper also presents LES of a gas turbine combustor. LES is performed using an assumed FDF turbulent-combustion model in conjunction with the flamelet-generated manifold method. The advantage of this approach is that the chemical reaction is parameterized by only two variables, mixture fraction and progress variable. Thus calculations are signzficantlv faster than those with the transport FDF model. Circumftrentially averaged combustor exit fuel-air ratio profiles are compared to measurement data for two liner port patterns. It is shown that the LES calculations are in reasonable agreement with data and superior to Reynolds averaged Navier-Stokes calculations. These calculations indicate that LES of practical combustion systems are feasible economically and can be used for design analyses more routinely.
In spite of the increasing presence of renewable energy sources, fossil fuels will remain the primary supply of the world's energy needs for the upcoming future. Modern gas-turbine based systems represent one of the most efficient large-scale power generation technology currently available. Alongside this, gas-turbine power plants operate with very low emissions, have flexible operational characteristics and are able to utilize a broad range of fuels. It is expected that gas-turbine based plants will play an important role as an effective means of converting combustion energy in the future as well, because of the vast potential energy savings. The numerical approach to the design of complex systems such as gas-turbines has gained a continuous growth of interest in the last few decades. This because simulations are foreseen to provide a tremendous increase in the combustor efficiency, fuel-flexibility and quality over the next future. In this dissertation, an advanced turbulent combustion technique is implemented and progressively developed for the simulation of all the features that are typically observed in stationary gas-turbine combustion, including hydrogen as a fuel. The developed turbulent combustion model retains most of the accuracy of a detailed simulation while drastically reducing its computational time. As a result of this work, the advancement of power generation plants can be accelerated, paving the way for future developments of alternative fuel usage in a cleaner and more efficient combustion.
With regard to both the environmental sustainability and operating efficiency demands, modern combustion research has to face two main objectives, the optimization of combustion efficiency and the reduction of pollutants. This book reports on the combustion research activities carried out within the Collaborative Research Center (SFB) 568 “Flow and Combustion in Future Gas Turbine Combustion Chambers” funded by the German Research Foundation (DFG). This aimed at designing a completely integrated modeling and numerical simulation of the occurring very complex, coupled and interacting physico-chemical processes, such as turbulent heat and mass transport, single or multi-phase flows phenomena, chemical reactions/combustion and radiation, able to support the development of advanced gas turbine chamber concepts
This book presents a comprehensive review of state-of-the-art models for turbulent combustion, with special emphasis on the theory, development and applications of combustion models in practical combustion systems. It simplifies the complex multi-scale and nonlinear interaction between chemistry and turbulence to allow a broader audience to understand the modeling and numerical simulations of turbulent combustion, which remains at the forefront of research due to its industrial relevance. Further, the book provides a holistic view by covering a diverse range of basic and advanced topics—from the fundamentals of turbulence–chemistry interactions, role of high-performance computing in combustion simulations, and optimization and reduction techniques for chemical kinetics, to state-of-the-art modeling strategies for turbulent premixed and nonpremixed combustion and their applications in engineering contexts.
This volume continues previous DLES proceedings books, presenting modern developments in turbulent flow research. It is comprehensive in its coverage of numerical and modeling techniques for fluid mechanics. After Surrey in 1994, Grenoble in 1996, Cambridge in 1999, Enschede in 2001, Munich in 2003, Poitiers in 2005, and Trieste in 2009, the 8th workshop, DLES8, was held in Eindhoven, The Netherlands, again under the auspices of ERCOFTAC. Following the spirit of the series, the goal of this workshop is to establish a state-of-the-art of DNS and LES techniques for the computation and modeling of transitional/turbulent flows covering a broad scope of topics such as aerodynamics, acoustics, combustion, multiphase flows, environment, geophysics and bio-medical applications. This gathering of specialists in the field was a unique opportunity for discussions about the more recent advances in the prediction, understanding and control of turbulent flows in academic or industrial situations.
This volume reflects the state of the art of numerical simulation of transitional and turbulent flows and provides an active forum for discussion of recent developments in simulation techniques and understanding of flow physics. Following the tradition of earlier DLES workshops, these papers address numerous theoretical and physical aspects of transitional and turbulent flows. At an applied level it contributes to the solution of problems related to energy production, transportation, magneto-hydrodynamics and the environment. A special session is devoted to quality issues of LES. The ninth Workshop on 'Direct and Large-Eddy Simulation' (DLES-9) was held in Dresden, April 3-5, 2013, organized by the Institute of Fluid Mechanics at Technische Universität Dresden. This book is of interest to scientists and engineers, both at an early level in their career and at more senior levels.
Turbulent combustion sits at the interface of two important nonlinear, multiscale phenomena: chemistry and turbulence. Its study is extremely timely in view of the need to develop new combustion technologies in order to address challenges associated with climate change, energy source uncertainty, and air pollution. Despite the fact that modeling of turbulent combustion is a subject that has been researched for a number of years, its complexity implies that key issues are still eluding, and a theoretical description that is accurate enough to make turbulent combustion models rigorous and quantitative for industrial use is still lacking. In this book, prominent experts review most of the available approaches in modeling turbulent combustion, with particular focus on the exploding increase in computational resources that has allowed the simulation of increasingly detailed phenomena. The relevant algorithms are presented, the theoretical methods are explained, and various application examples are given. The book is intended for a relatively broad audience, including seasoned researchers and graduate students in engineering, applied mathematics and computational science, engine designers and computational fluid dynamics (CFD) practitioners, scientists at funding agencies, and anyone wishing to understand the state-of-the-art and the future directions of this scientifically challenging and practically important field.