Download Free Jb T 56078 1996 Translated English Of Chinese Standard Jbt 56078 1996 Jb T56078 1996 Jbt56078 1996 Book in PDF and EPUB Free Download. You can read online Jb T 56078 1996 Translated English Of Chinese Standard Jbt 56078 1996 Jb T56078 1996 Jbt56078 1996 and write the review.

This Standard is applicable to the mixed-flow hydraulic turbine, ramp-flow hydraulic turbine, axial-flow hydraulic turbine (tubular hydraulic turbine refers to axial-flow) and scoop hydraulic turbine of which the power exceeds 10 MW; the butterfly valve of which the nominal diameter is 1000~8000 mm; and the rotary valve of which the nominal diameter is 500~2400 mm.
This document provides the comprehensive list of Chinese Industry Standards - Category: JB; JB/T; JBT.
This Standard specifies the terms, marking, technical requirements, test methods, inspection rules, signs and packaging, transportation and storage of compression gas springs. This Standard is applicable to gas springs filled with nitrogen or inert gas as the working medium.
This Standard specifies the technical conditions of eight kinds of fuel oils used in different operating conditions and in different burners.
The value listed in this Standard are conceptually not allowed in the stamping tolerance. However, general stamping parts come with varying degrees of burrs. When the burr.
This standard specifies the marking content, marking pattern, marking method and size, paint color of valve of various general-purpose valves. This standard applies to all types of general-purpose valves.
This Standard applies to the manufacture and acceptance of 12-spline flange nut and 12 point flange nut (hereinafter referred to as bolt and nut respectively) that are used for gas turbine power plant.
This Part of the JB/T 5000 specifies the ultrasonic, magnetic-powder and penetration testing methods and quality grades of forged steel. This Part applies to non-destructive testing of forged steel for heavy machinery. Non-destructive testing methods as specified in this Part may involve hazardous materials, operations and equipment, so the non-destructive testing personnel shall comply with relevant safety and health regulations.
JB/T 5000 specifies the ultrasonic inspection, ray inspection, magnetic particle inspection and penetrate inspection with its relative quality grade.
This standard specifies the classification, naming, requirements, test methods, inspection rules, markings, packaging, transportation and storage of bi-metal collar for crawler construction machinery. This standard applies to the bi-metal collar (hereinafter referred to as collar) of the supporting wheels, guide wheels and other transmission parts of the walking mechanism of crawler construction machinery.