Download Free Investigations Of Rubber Additives In Asphalt Paving Mixtures Book in PDF and EPUB Free Download. You can read online Investigations Of Rubber Additives In Asphalt Paving Mixtures and write the review.

Ground tire rubber is investigated as an additive in asphalt pavement construction. Volume I contains the technical portion of the report, suggested guide specifications, and design method. Volume II: Appendices contains the Project Identification, Distribution of Projects by Application Type, and Project Description.
This synthesis on the use of recycled rubber tires in highways will be of interest to administrators and policy-makers; pavement, materials, geotechnical, environmental, and traffic operations engineers; and research engineers involved with highway design and construction issues. Information is provided on the uses of rubber tires in asphalt paving materials as well as other uses, such as on fills and embankments, for erosion control and on railroad grade crossings. Specifically, information is included which identifies the agencies using or implementing applications for recycled rubber tires and defines the design parameters, technical and construction limitations, performance, costs, benefits, environmental limitations, specifications, and availability. This synthesis of information defines the use of recycled rubber tires in highways and is based on a review of nearly 500 references and on information recorded from state highway agency responses to a 1991 survey of practice. Updates are included for as much of the state practice information possible through 1993. The use of scrap tires for highway applications is dynamic with regard to policy and technical issues. Therefore, the reader should keep in mind that the information presented reflects the best available data at a particular time. The synthesis also identifies current research in the topic area, critical research needs, and legislative issues that affect application and use of recycled rubber tires.
The mixture design and performance characteristics of crumb rubber modified asphalt concretes were investigated in this research project to meet the requirements of the Intermodal Surface Transportation Efficiency Act (ISTEA) of 1991, which has required each State to incorporate scrap tire rubber into its asphalt paving materials. Specifically, the objectives of this research encompass the following: (i) investigation of the rheological properties of asphalt-rubber binder to determine optimum content of crumb rubber; (ii) development of optimum mix design for various applications, including both wet and dry mix processes; (iii) characterization of mechanical properties of recommended paving mixtures, including resilient modulus, fatigue cracking behavior, low-temperature thermal cracking resistance, water sensitivity test, incremental creep test and loaded wheel track test; and (iv) comparison of performance of selected paving mixes.
The fatigue life of an asphalt pavement is directly related to various factors of a typical warm mix asphalt (WMA) mixture. Improving the understanding of the fatigue behavior of the rubberized WMA mixtures is helpful in recycling the scrap tires and saving energy. This study explores the utilization of the conventional fatigue analysis approach in investigating the cumulative dissipated energy, stiffness, and fatigue life of rubberized asphalt concrete mixtures containing WMA additives. The fatigue beams were made with one rubber type (-40 mesh ambient crumb rubber), two aggregate sources, two WMA additives (Asphamin and Sasobit), and tested at 5°C. The test results indicated that the addition of crumb rubber and WMA additive not only reduced the mixing and compaction temperatures of rubberized asphalt mixtures offset by crumb rubber but also slightly extended the long-term performance of pavement when compared with conventional asphalt mixtures.