Download Free Investigation Of The Properties Of Tungsten And Its Alloys Book in PDF and EPUB Free Download. You can read online Investigation Of The Properties Of Tungsten And Its Alloys and write the review.

Why does someone write a book about Tungsten? There are several reasons and precedents for this, the most important of which is that the last book on tungsten was written more than 20 years ago, in 1977, by St. W H. Yih and Ch T. Wang. During the intervening period there have been many new scientific and technological developments and innova tions, so it was not only our opinion but the view of many other members of the "tungsten family" that it was time to start writing a new book about tungsten. Preparations of the new book began in 1994. further impetus to the project was provided by the realization that in spite of this new knowledge having been presented at seminars or published in the technical press, a general acknowledgement of it by the majority of technicians and scientists is still far from being realized. It is our hope that this book will significantly contribute to a broader acceptance of recent scientific and technological innovations. An important prerequisite for such a project is the availability of a recently retired, experienced person willing to devote his time and talents to the tedious part of the exercise.
Government-sponsored tungsten research and development efforts encompass a broad rage of technological activities. Typifying the extreme limits of efforts since January, 1960, studies have ranged from preparation of unalloyed metal to development of high-integrity fabricated shapes of tungsten-base materials. Nine major areas outline the broad over-all effort, and each is summarized within this report by brief technical discussions of 104 separate studies on 79 research programs. Included are preparation of metal, consolidation, primary and secondary working, joining, fabrication and performance of rocket nozzles, oxidation and other high-temperature reactions, protective coatings, properties, and physical metallurgy.
Sintering is a method for manufacturing components from ceramic or metal powders by heating the powder until the particles adhere to form the component required. The resulting products are characterised by an enhanced density and strength, and are used in a wide range of industries. Sintering of advanced materials: fundamentals and processes reviews important developments in this technology and its applicationsPart one discusses the fundamentals of sintering with chapters on topics such as the thermodynamics of sintering, kinetics and mechanisms of densification, the kinetics of microstructural change and liquid phase sintering. Part two reviews advanced sintering processes including atmospheric sintering, vacuum sintering, microwave sintering, field/current assisted sintering and photonic sintering. Finally, Part three covers sintering of aluminium, titanium and their alloys, refractory metals, ultrahard materials, thin films, ultrafine and nanosized particles for advanced materials.With its distinguished editor and international team of contributors, Sintering of advanced materials: fundamentals and processes reviews the latest advances in sintering and is a standard reference for researchers and engineers involved in the processing of ceramics, powder metallurgy, net-shape manufacturing and those using advanced materials in such sectors as electronics, automotive and aerospace engineering. - Explores the thermodynamics of sintering including sinter bonding and densification - Chapters review a variety of sintering methods including atmosphere, vacuum, liquid phase and microwave sintering - Discusses sintering of a variety of materials featuring refractory metals, super hard materials and functionally graded materials
The results of a state-of-the-art survey covering tungsten and ten of its alloys are presented. All data are given in tabular and graphical form covering some of the more important physical, mechanical, and metallurgical properties for each material. References are given at the conclusion of each material section.
Electrodeposition of Alloys: Principles and Practice, Volume I covers the general and theoretical aspects of the electrodeposition of alloy containing silver and/or copper. This book is organized into three parts encompassing 21 chapters. The first part considers first the history of electrodeposition, the applications of electrodeposited alloys, and the practical considerations involved in electrodeposition. This part also deals with the effect of operating variables on composition of electrodeposited alloys, and the physico-chemical properties of the alloy. The second part focuses on the theoretical aspects of alloy electrodeposition. This part includes discussions on the role of cathode diffusion layer, the effects of complexing agents, and the concept of alloy plating. The third part discusses the practical aspects of the electrodeposition of alloys, focusing primarily on the electrodeposition of alloys from aqueous solutions. This part examines first brass and bronze plating, followed by the electrodeposition of copper-tin, silver, and iron containing alloys. This book is directed toward electrochemists and researchers.
This book embraces the entire range of problems associated with phase equilibria in “tungsten – carbon” binary system and related ternary systems, nonstoichiometry, disorder and order in different tungsten carbides, electronic and crystal structure of these carbides. The main application of tungsten carbides is constituent in hardmetals for cutting tools. In the last 20 years, the most active efforts were made in synthesis and application of nanocrystalline tungsten carbide for the production of nanostructured hardmetals. The present book describes in detail different methods for production of nanocrystalline tungsten carbide. The peculiarities of sintering of Co hardmetals from nanocrystalline powders having different particle sizes are discussed. Materials scientists using tungsten carbide to create novel superhard and tough materials will find this book particularly useful.
Sintering is the process of forming materials and components from a powder under the action of thermal energy. It is a key materials science subject: most ceramic materials and many specialist metal powder products for use in key industries such as electronics, automotive and aerospace are formed this way. Written by one of the leading experts in the field, this book offers an unrivalled introduction to sintering and sintering processes for students of materials science and engineering, and practicing engineers in industry. The book is unique in providing a complete grounding in the principles of sintering and equal coverage of the three key sintering processes: densification, grain growth and microstructure. Students and professional engineers alike will be attracted by the emphasis on developing a detailed understanding of the theory and practical processes of sintering, the balanced coverage of ceramic and metal sintering, and the accompanying examination questions with selected solutions. - Delivering unrivalled depth of coverage on the basis of sintering, science, including thermodynamics and polycrystalline microstructure. - Unique in its balanced coverage of the three key sintering elements - densification, grain growth and microstructure. - A key reference for students and engineers in materials science and engineering, accompanied by examination questions and selected solutions.
Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.