Download Free Introduction To Contamination Control And Cleanroom Technology Book in PDF and EPUB Free Download. You can read online Introduction To Contamination Control And Cleanroom Technology and write the review.

Contamination control is being used by more and more industries where the highest level of cleanliness and hygiene is of vital importance. This book covers the basic principles of contamination control and cleanroom technology from a holistic point of view. It deals with cleanliness and hygiene and their effects on the outcome of a process, reflecting the latest results from both scientific and practical points of view. The following topics are covered: contaminants and how they are measured cleanrooms and clean zones cleaning and decontamination cleanroom clothing the impact of people on cleanliness. Intended as an introduction to the area of contamination control, the text is also an excellent source of knowledge for people with both theoretical and practical experience. The Swedish version has been used for a long time within the Nordic countries as a basic training textbook within the pharmaceutical, microelectronics, food and beverage, optics and many other industries.
A self-contained and practical book providing step-by-step guidance to the design and construction of cleanrooms, appropriate testing methodologies, and operation for the minimization of contamination… This second edition has been comprehensively revised and includes extensive updates to the two chapters that contain information on cleanroom standards and guidelines. The chapter on risk management has been extensively revised, especially the section on risk assessment. Other new subjects that have been added to the various chapters are those on clean-build, determination of air supply volumes for non-unidirectional airflow cleanrooms, RABS (Restricted Access Barrier Systems), contamination recovery test methods, entry of large items into a cleanroom, glove allergy problems, and how to develop a cleanroom cleaning programme. Used for in-house training and a textbook in colleges, this volume is for cleanroom personnel at all levels. It provides novices with an introduction to the state-of-the-art technology and professionals with an accessible reference to the current practices. It is particularly useful in the semiconductor, pharmaceutical, biotechnology and life sciences industries. William Whyte is an international authority in cleanrooms, with over 45 years experience in research, teaching and consulting in the electronic, healthcare and pharmaceutical industries. He is a member of British and International standards committees writing the International Cleanroom standards, and has received numerous awards for his work in Cleanroom Technology. A comment on the first edition: "...extremely useful and helpful...very well-written, highly organized, easy to understand and follow..." (Environmental Geology, 2003)
Biocontamination Control for Pharmaceuticals and Healthcare outlines a biocontamination strategy that tracks bio-burden control and reduction at each transition in classified areas of a facility. The first edition of the book covered many of the aspects of the strategy, but the new official guidance signals that a roadmap is required to fully comply with its requirements. Completely updated with the newest version of the EU-GPM (EN17141) the new edition expands the coverage of quality risk management and new complete examples to help professionals bridge the gap between regulation and implementation. Biocontamination Control for Pharmaceuticals and Healthcare offers professionals in pharma quality control and related areas guidance on building a complete biocontamination strategy. - Includes the most current regulations - Contains three new chapters, including Application of Quality Risk Management and its Application in Biocontamination Control, Designing an Environmental Monitoring Programme, and Synthesis: An Anatomy of a Contamination Control Strategy - Offers practical guidance on building a complete biocontamination strategy
A self-contained and practical book providing step-by-step guidance to the design and construction of cleanrooms, appropriate testing methodologies, and operation for the minimization of contamination... This second edition has been comprehensively revised and includes extensive updates to the two chapters that contain information on cleanroom standards and guidelines. The chapter on risk management has been extensively revised, especially the section on risk assessment. Other new subjects that have been added to the various chapters are those on clean-build, determination of air supply volumes for non-unidirectional airflow cleanrooms, RABS (Restricted Access Barrier Systems), contamination recovery test methods, entry of large items into a cleanroom, glove allergy problems, and how to develop a cleanroom cleaning programme. Used for in-house training and a textbook in colleges, this volume is for cleanroom personnel at all levels. It provides novices with an introduction to the state-of-the-art technology and professionals with an accessible reference to the current practices. It is particularly useful in the semiconductor, pharmaceutical, biotechnology and life sciences industries. William Whyte is an international authority in cleanrooms, with over 45 years experience in research, teaching and consulting in the electronic, healthcare and pharmaceutical industries. He is a member of British and International standards committees writing the International Cleanroom standards, and has received numerous awards for his work in Cleanroom Technology. A comment on the first edition: "...extremely useful and helpful...very well-written, highly organized, easy to understand and follow..." (Environmental Geology, 2003)
Contamination control has received great interest and found increasing use within several industrial branches including microelectronics, pharmaceuticals, food and beverages using various concepts of contamination control in their production, purification or packaging process. The book supplies a holistic view of contamination control, presenting the different types of contaminants in a summarized form. The focus is on how to protect products and processes from external contamination and also on different ways to take care of and control contaminants generated in the process. The aim is to eliminate them from a product or a process flow (e.g. through filtration), or to render them harmless (e.g. through sterilisation by moist heat). Product purity or the cleanliness of process flows are often complex matters and hard to define in easily understood terms. This book covers a variety of different techniques used in order to achieve and maintain certain overall cleanliness levels for both microbiological or inanimate particle contaminants. It supplies basic knowledge including validation aspects for industrial branches working with increased demands of cleanliness, for instance water purification, steam, pressurized gases and different flows in a process together with finished products.
Regulatory agencies worldwide have issued directives or such requirements for air quality standards in embryology laboratories. This practical guide reviews the application of clean room technology or controlled environments specifically suited for Assisted Reproductive Technology (ART) Units. Its comprehensive coverage includes material on airborne particles and volatile organic compounds, including basic concepts, regulation, construction, materials, certification, clinical results in humans, and more.
This textbook covers all the steps in manufacturing a biomedical product from bench to bedside. It specifically focuses on quality assurance and management and explains the different good practice principles in the various phases of product development as well as how to fulfill them: Good laboratory practice, good manufacturing practice and good clinical practice. It provides readers with the know-how to design biomedical experiments to ensure quality and integrity, to plan and conduct standard preclinical studies and to assure the quality of the final manufactured biomedical products. Importantly, it also addresses ethical concerns and considerations. The book discusses the guidelines and ethical considerations for preclinical and clinical studies, to allow readers to identify safety concerns regarding biomedical products and to improve pre-clinical studies for the development of better products. This textbook is a valuable guide for biomedical students (B.Sc., M.S., and Ph.D. students) in the field of molecular medicine, medical biotechnology, stem cell research and related areas, as well as for professionals such as quality control staff, tissue bankers, policy-makers and health professionals.
Failure to adequately control any microbial challenge associated within process or product by robust sterilisation will result in a contaminated marketed product, with potential harm to the patient. Sterilisation is therefore of great importance to healthcare and the manufacturers of medical devices and pharmaceuticals. Sterility, sterilisation and sterility assurance for pharmaceuticals examines different means of rendering a product sterile by providing an overview of sterilisation methods including heat, radiation and filtration. The book outlines and discusses sterilisation technology and the biopharmaceutical manufacturing process, including aseptic filling, as well as aspects of the design of containers and packaging, as well as addressing the cleanroom environments in which products are prepared. Consisting of 18 chapters, the book comprehensively covers sterility, sterilisation and microorganisms; pyrogenicity and bacterial endotoxins; regulatory requirements and good manufacturing practices; and gamma radiation. Later chapters discuss e-beam; dry heat sterilisation; steam sterilisation; sterilisation by gas; vapour sterilisation; and sterile filtration, before final chapters analyse depyrogenation; cleanrooms; aseptic processing; media simulation; biological indicators; sterility testing; auditing; and new sterilisation techniques. - Covers the main sterilisation methods of physical removal, physical alteration and inactivation - Includes discussion of medical devices, aseptically filled products and terminally sterilised products - Describes bacterial, pyrogenic, and endotoxin risks to devices and products
This book deals with the design and construction of buildings for nanoscale science and engineering research. The information provided in this book is useful for designing and constructing buildings for such advanced technologies as nanotechnology, nanoelectronics and biotechnology. The book outlines the technology challenges unique to each of the building environmental challenges outlined below and provides best practices and examples of engineering approaches to address them: • Establishing and maintaining critical environments: temperature, humidity, and pressure • Structural vibration isolation • Airborne vibration isolation (acoustic noise) • Isolation of mechanical equipment-generated vibration/acoustic noise • Cost-effective power conditioning • Grounding facilities for low electrical interference • Electromagnetic interference (EMI)/Radio frequency interference (RFI) isolation • Airborne particulate contamination • Airborne organic and chemical contamination • Environment, safety and health (ESH) considerations • Flexibility strategies for nanotechnology facilities The authors are specialists and experts with knowledge and experience in the control of environmental disturbances to buildings and experimental apparatus.
Building Services Design Methodology clearly sets out and defines the building services design process from concept to post-construction phase. By providing a step-by-step methodology for students and practitioners of service engineering, the book will encourage improved efficiency (both in environmental terms and in terms of profit enhancement) through better project management. Generic advice and guidance is set in the current legal and contractual context, ensuring that this will be required reading for professionals. The book's practical style is reinforced by a number of case studies.