Download Free Intergranular And Interphase Boundaries In Materials Ii Book in PDF and EPUB Free Download. You can read online Intergranular And Interphase Boundaries In Materials Ii and write the review.

Continuing the scope of the preceding Conferences on Intergranular and Interphase Boundaries in Materials, the present conference focused on the atomic-level modeling of interfaces, the structural and chemical characterization of internal interfaces, on their thermodynamic, kinetic, mechanical, electrical, magnetic behavior and high-Tc superconductivity, and on the application of current knowledge to the design of polycrystalline materials having improved properties. Particular attention was paid to non-equilibrium segregation in irradiated materials.
Proceedings of the 9th International Conference on Intergranular and Interphase Boundaries in Materials (iib 98), held in Prague, Czech Republic, July 1998
Proceedings of a symposium sponsored by the Shaping and Forming Committee of the Materials Processing and Manufacturing Division (MPMD) and the Mechanical Behavior Committee (Jt. SMD/ASM-MSCTS) of the Structural Materials Division (SMD) of TMS (The Minerals, Metals & Materials Society) and held during the 2002 TMS Annual Meeting in Seattle, Washington February 17-21,2002.
Proceedings of the 7th International Conference on Intergranular and Interphase Boundaries in Materials (iib 95), held in Lisboa, Portugal, June 1995
In an attempt to meet the demand for new ultra-high strength materials, the processing of novel material configurations with unique microstructure is being explored in systems which are further and further from equilibrium. One such class of emerging materials is the so-called nanophased or nanostructured materials. This class of materials includes metals and alloys, ceramics, and polymers characterized by controlled ultra-fine microstructural features in the form oflayered, fibrous, or phase and grain distribution. While it is clear that these materials are in an early stage of development, there is now a sufficient body of literature to fuel discussion of how the mechanical properties and deformation behavior can be controlled through control of the microstructure. This NATO-Advanced Study Institute was convened in order to assess our current state of knowledge in the field of mechanical properties and deformation behavior in materials with ultra fine microstructure, to identify opportunities and needs for further research, and to identify the potential for technological applications. The Institute was the first international scientific meeting devoted to a discussion on the mechanical properties and deformation behavior of materials having grain sizes down to a few nanometers. Included in these discussions were the topics of superplasticity, tribology, and the supermodulus effect. Lectures were also presented which covered a variety of other themes including synthesis, characterization, thermodynamic stability, and general physical properties.
ENGINEERING PHYSICS OF HIGH-TEMPERATURE MATERIALS Discover a comprehensive exploration of high temperature materials written by leading materials scientists In Engineering Physics of High-Temperature Materials: Metals, Ice, Rocks, and Ceramics distinguished researchers and authors Nirmal K. Sinha and Shoma Sinha deliver a rigorous and wide-ranging discussion of the behavior of different materials at high temperatures. The book discusses a variety of physical phenomena, from plate tectonics and polar sea ice to ice-age and intraglacial depression and the postglacial rebound of Earth’s crust, stress relaxation at high temperatures, and microstructure and crack-enhanced Elasto Delayed Elastic Viscous (EDEV) models. At a very high level, Engineering Physics of High-Temperature Materials (EPHTM) takes a multidisciplinary view of the behavior of materials at temperatures close to their melting point. The volume particularly focuses on a powerful model called the Elasto-Delayed-Elastic-Viscous (EDEV) model that can be used to study a variety of inorganic materials ranging from snow and ice, metals, including complex gas-turbine engine materials, as well as natural rocks and earth formations (tectonic processes). It demonstrates how knowledge gained in one field of study can have a strong impact on other fields. Engineering Physics of High-Temperature Materials will be of interest to a broad range of specialists, including earth scientists, volcanologists, cryospheric and interdisciplinary climate scientists, and solid-earth geophysicists. The book demonstrates that apparently dissimilar polycrystalline materials, including metals, alloys, ice, rocks, ceramics, and glassy materials, all behave in a surprisingly similar way at high temperatures. This similarity makes the information contained in the book valuable to all manner of physical scientists. Readers will also benefit from the inclusion of: A thorough introduction to the importance of a unified model of high temperature material behavior, including high temperature deformation and the strength of materials An exploration of the nature of crystalline substances for engineering applications, including basic materials classification, solid state materials, and general physical principles Discussions of forensic physical materialogy and test techniques and test systems Examinations of creep fundamentals, including rheology and rheological terminology, and phenomenological creep failure models Perfect for materials scientists, metallurgists, and glaciologists, Engineering Physics of High-Temperature Materials: Metals, Ice, Rocks, and Ceramics will also earn a place in the libraries of specialists in the nuclear, chemical, and aerospace industries with an interest in the physics and engineering of high-temperature materials.
The choice of a material for a certain application is made taking into account its properties. If, for example one would like to produce a table, a hard material is needed to guarantee the stability of the product, but the material should not be too hard so that manufacturing is still as easy as possible - in this simple example wood might be the material of choice. When coming to more advanced applications the required properties are becoming more complex and the manufacturer`s desire is to tailor the properties of the material to fit the needs. To let this dream come true, insights into the microstructure of materials is crucial to finally control the properties of the materials because the microstructure determines its properties. Written by leading scientists in the field of microstructural design of engineering materials, this book focuses on the evolution and behavior of granular microstructures of various advanced materials during plastic deformation and treatment at elevated temperatures. These topics provide essential background and practical information for materials scientists, metallurgists and solid state physicists.
The advent of engineering-designed polymer matrix composites in the late 1940s has provided an impetus for the emergence of sophisticated ceramic matrix composites. The development of CMCs is a promising means of achieving lightweight, structural materials combining high temperature strength with improved fracture toughness, damage tolerance and thermal shock resistance. Considerable research effort is being expended in the optimisation of ceramic matrix composite systems, with particular emphasis being placed on the establishment of reliable and cost-effective fabrication procedures.Ceramic matrix composites consists of a collection of chapters reviewing and describing the latest advances, challenges and future trends in the microstructure and property relationship of five areas of CMCs. Part one focuses on fibre, whisker and particulate-reinforced ceramic matrix composites, part two explores graded and layered ceramics, while the five chapters in part three cover nanostructured CMCs in some detail. Refractory and speciality ceramic composites are looked at in part four, with chapters on magnesia-spinel composite refractory materials, thermal shock of CMCs and superplastic CMCs. Finally, part four is dedicated to non-oxide ceramic composites.Ceramic matrix composites is a comprehensive evaluation of all aspects of the interdependence of processing, microstructure, properties and performance of each of the five categories of CMC, with chapters from experienced and established researchers. It will be essential for researchers and engineers in the field of ceramics and more widely, in the field of inorganic materials. - Looks at the latest advances, challenges and future trends - Compiled by experienced and established researchers in the field - Essential for researchers and engineers