Download Free Industrial Hygiene Control Of Airborne Chemical Hazards Second Edition Book in PDF and EPUB Free Download. You can read online Industrial Hygiene Control Of Airborne Chemical Hazards Second Edition and write the review.

Are you a practicing occupational hygienist wondering how to find a substitute organic solvent that is safer to use than the hazardous one your company is using? Chapter 6 is your resource. Are you a new hygienist looking for an alternative technology as a nonventilation substitute for an existing hazard? Chapter 8 is your resource. Are you looking for an overview of ventilation? Chapters 10 and 11 are your resource? Are you an industrial hygiene student wanting to learn about local exhaust ventilation? Chapters 13 through 16 are your resource. Are you needing to learn about personal protective equipment and respirators? Chapters 21 and 22 are your resources. This new edition brings all of these topics and more right up-to-date with new material in each chapter, including new governmental regulations. While many of the controls of airborne hazards have their origins in engineering, this author has been diligent in explaining concepts, writing equations in understandable terms, and covering the topics of non-ventilation controls, both local exhaust and general ventilation, and receiver controls at the level needed by most IHs without getting too advanced. Taken as a whole, this book provides a unique, comprehensive tool to learn the challenging yet rewarding role that industrial hygiene can play in controlling airborne chemical hazards at work. Most chapters contain a set of practice problems with the solutions available to instructors. Features Written for the novice industrial hygienist but useful to prepare for ABIH certification Explains engineering concepts but requires no prior engineering background Includes specific learning goals that differentiate the depth of learning appropriate to each topic within the fuller information and explanations provided for each chapter Contains updated governmental regulations and abundant references Presents a consistent teaching philosophy and approach throughout the book Deals with both ventilation and non-ventilation controls
Are you a practicing occupational hygienist wondering how to find a substitute organic solvent that is safer to use than the hazardous one your company is using? Chapter 6 is your resource. Are you a new hygienist looking for an alternative technology as a nonventilation substitute for an existing hazard? Chapter 8 is your resource. Are you looking for an overview of ventilation? Chapters 10 and 11 are your resource? Are you an industrial hygiene student wanting to learn about local exhaust ventilation? Chapters 13 through 16 are your resource. Are you needing to learn about personal protective equipment and respirators? Chapters 21 and 22 are your resources. This new edition brings all of these topics and more right up-to-date with new material in each chapter, including new governmental regulations. While many of the controls of airborne hazards have their origins in engineering, this author has been diligent in explaining concepts, writing equations in understandable terms, and covering the topics of non-ventilation controls, both local exhaust and general ventilation, and receiver controls at the level needed by most IHs without getting too advanced. Taken as a whole, this book provides a unique, comprehensive tool to learn the challenging yet rewarding role that industrial hygiene can play in controlling airborne chemical hazards at work. Most chapters contain a set of practice problems with the solutions available to instructors. Features Written for the novice industrial hygienist but useful to prepare for ABIH certification Explains engineering concepts but requires no prior engineering background Includes specific learning goals that differentiate the depth of learning appropriate to each topic within the fuller information and explanations provided for each chapter Contains updated governmental regulations and abundant references Presents a consistent teaching philosophy and approach throughout the book Deals with both ventilation and non-ventilation controls
Do you need guidelines for choosing a substitute organic solvent that is safer to use? Do you need an effective, cheap but perhaps temporary way to reduce exposures before you can convince your employer to spend money on a long-term or more reliable solution? Do you need information about local exhaust ventilation or personal protective equipment like respirators and gloves? Industrial Hygiene Control of Airborne Chemical Hazards provides the answers to these questions and more. Science-based and quantitative, the book introduces methods for controlling exposures in diverse settings, focusing squarely on airborne chemical hazards. It bridges the gap between existing knowledge of physical principles and their modern application with a wealth of recommendations, techniques, and tools accumulated by generations of IH practitioners to control chemical hazards. Provides a unique, comprehensive tool for facing the challenges of controlling chemical hazards in the workplace. Although William Popendorf has written the book at a fundamental level, he assumes the reader has some experience in science and math, as well as in manufacturing or other work settings with chemical hazards, but is inexperienced in the selection, design, implementation, or management of chemical exposure control systems. Where the book is quantitative, of course there are lots of formulae, but in general the author avoids vague notation and long derivations.
This book is a non-encyclopedic introductory textbook of industrial hygiene. Based on years of teaching a single-semester course on the topic, it presents a broad survey of the field and addresses the typical student. Introduction to Industrial Hygiene is divided into three sections. The first section focuses on chemical hazards, presenting the basics of toxicology, the problems of skin contact and inhalation, the detection and control of airborne contaminants, and the threat of fire or explosion. The first part also describes government regulations and the agencies that enforce them. The second part of the book discusses injury from physical causes, including sound, radiation, heat, and accidents. This part also contains an introduction to ergonomics. The third part describes a range of industries that are major sources of both employment and potential injury, and it applies the principles outlined in the first two parts. At the end of each chapter, the material covered is summarized in a Key Points section. References are provided both to background material and to sources that expand beyond the scope of the chapter. Problems sets have practical bases and lead students into the CFR to familiarize them with the contents and the manner of locating information in the CFR. Extensive appendices provide practical information and allow the text to continue being a valuable source of reference for the student.
Do you need guidelines for choosing a substitute organic solvent that is safer to use? Do you need an effective, cheap but perhaps temporary way to reduce exposures before you can convince your employer to spend money on a long-term or more reliable solution? Do you need information about local exhaust ventilation or personal protective equipment like respirators and gloves? Industrial Hygiene Control of Airborne Chemical Hazards provides the answers to these questions and more. Science-based and quantitative, the book introduces methods for controlling exposures in diverse settings, focusing squarely on airborne chemical hazards. It bridges the gap between existing knowledge of physical principles and their modern application with a wealth of recommendations, techniques, and tools accumulated by generations of IH practitioners to control chemical hazards. Provides a unique, comprehensive tool for facing the challenges of controlling chemical hazards in the workplace. Although William Popendorf has written the book at a fundamental level, he assumes the reader has some experience in science and math, as well as in manufacturing or other work settings with chemical hazards, but is inexperienced in the selection, design, implementation, or management of chemical exposure control systems. Where the book is quantitative, of course there are lots of formulae, but in general the author avoids vague notation and long derivations.
Despite many advances, 20 American workers die each day as a result of occupational injuries. And occupational safety and health (OSH) is becoming even more complex as workers move away from the long-term, fixed-site, employer relationship. This book looks at worker safety in the changing workplace and the challenge of ensuring a supply of top-notch OSH professionals. Recommendations are addressed to federal and state agencies, OSH organizations, educational institutions, employers, unions, and other stakeholders. The committee reviews trends in workforce demographics, the nature of work in the information age, globalization of work, and the revolution in health care deliveryâ€"exploring the implications for OSH education and training in the decade ahead. The core professions of OSH (occupational safety, industrial hygiene, and occupational medicine and nursing) and key related roles (employee assistance professional, ergonomist, and occupational health psychologist) are profiled-how many people are in the field, where they work, and what they do. The book reviews in detail the education, training, and education grants available to OSH professionals from public and private sources.
The International Board for the Certification of Safety Managers (IBFCSM) has designated this text as the Primary Study Reference for those preparing to sit for the Certified Hazard Control Manager (CHCM) and the Certified Hazard Control Manager-Security (CHCM-SEC) Examinations. Introduction to Hazard Control Management: A Vital Organizational Func